I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

Up

I'll bite. How does this clean oil filters?

PM sent

It doesn't. It adapts to fit a variety of oil filters which can be attached to the muzzle of the rifle ostensibly to catch solvent used to clean the bore.

T.S.

Or something like that...

OK, I understand now .)

Rrrrrrriiiiiiight.

BATFE might show up at your doorstep one day. I would be scared to get caught with one of those. Though I am guessing they are legal for the cleaning purpose.

Huh?

Safariman will take a thousand units. He said he is good for it....

It's not illegal to possess them it's illegal to use them for that purpose, that's why it's been advertised cleaning adapter

A clean gun is a good gun

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

At the last gun show I went to a guy had these set up with oil filters and fuel filters. A couple threaded flashlights too.

He had the washers and spacers that go in the filter as well. I expect the solvent would just come out the other end since there was a hole through the whole contraption. Lol.

It was just a demo on gun cleaning accessories.

This is not the first place I have seen these sold.

Like most tools, if used for its stated purpose, it is legal. A pipe wrench used to bludgeon another human is quickly transformed from a legal tool to a deadly weapon.


I'm not sure if this is still the case but, a similar device used to be on the market that was intended to be used to attach an oil filter as a suppressor. The difference was the device had a serial number allowing it to be registered with BATF. The negative on that arrangement is the circumference of most filters interferes with use of the weapon's sights.

T.S.

Yeah, based on the recent bumpstock ban, I'd hate to buy one of these and discover that some day I had become a felon.

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

Tag

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

A Clean gun Is A Useful Gun

They work well. Plenty videos out there

Up

UP

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

BTTT

UP

BTTT

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

Up

BTTT

UP

BTTT

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

Up

BTTT

UP

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

UP

How many times can you clean your gun before you need a new filter?

BTTT

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

UP

BTTT

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

UP

BTTT

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

UP

BTTT

UP

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

UP

Persistant bugger, aint ya?


Free bump.

Thanks!

UP

Received mine. Works great.

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

I will take one,pm me with payment address
Thanks

Thanks! Will Do.

I will take one also. I'll P M you . Thanks Winston

Thanks!

Up

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

Up

BTTT

UP

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

UP

BTTT

Rifle can never be too clean

Pm sent

Got it,
Thanks!

A clean gun is a Happy Gun


I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

Wish you had one to clean my 44 magnum rifle.

I do have the 5/8 - 24 thread for .243-.30 cal as well

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

I do have the 5/8 - 24 thread for .243-.30 cal as well

TTT...

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

Super fast shipping and excellent quality! Enjoyed seeing the letter inside also!!!

Very Welcome!

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

BTTT

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

Before you buy one google "constructive intent"...

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

Up

BTTT

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

BTTT

So the fuel filters being built stronger and smaller might be better solvent traps?

Yup

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

Up

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

BTTT

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

Up

BTTT

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

BTTT

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

bunp

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

Just for the sake of discussion....can anybody recommend a longer, more cyliderical filter along with the part number? I looked at a STP S3600 and it seems a bit much in diameter.

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

BTTT

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

Bump

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

I use them and you can even buy the whole suppression system from amazon. I still choose 000 Buck to the head and pelvis over other methods of HD.

Bump for a good product and a fine guy to deal with.

Thanks Bro

ttt

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)
[

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

tag.

up

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

BTTT

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

Does this mean my plastic soda bottle is obsolete?!

Yes

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

UP

I've got some of these AR15 Cleaning Adapters for sale. TYD $17.00 each. Paypal Friends and family/ Gift, or Check/Money Order.
Just send me a PM (I do have the 5/8 - 24 thread for .243-.30 cal as well)



Oil Filter Cleaning Device Internal Thread: 1/2"-28 Straight External Thread: 3/4-16, 13/16-16, 3/4 NPT Thread Size: 1/2", 28 TPI (Thread-Per-Inch) UNEF
CNC From 7075 T6 Aircraft Aluminum Alloy Universal adapter- "The Only Adapter You'll Ever Need!"
Fits Common Filters: STP S3600, FRAM PH33600, Purolator PSL30001.
And Fuel Filters: Napa 4003, Wix 24003 and much more! (filters not included).

(I do have the 5/8 - 24 thread for .243-.30 cal as well)

UP

UP

UP

UP