[This ad is now obsolete. See my last post.]
<br>
<br>I need a ram, 0.810 inch in diameter and milled at the top to accept interchangeable shell-holders, for a Pacific (or similar) C-frame press. RCBS JR ram is 1 inch in diameter -- else I'd be happy as a bee in clover. Have acquired a pair of old Pacific presses (to use as dedicated deprimer and primer-seater), and both have the old-style ram with the case-holder cut-out milled into the top of the ram.

Note correction of diameter in edited first post.
<br>
<br>Mitutoyo dial caliper is more accurate than eyeball and steel ruler.

Ken,
<br>
<br>Would it be viable,to have the RCBS ram you mentioned prior,turned to the correct diameter for your application?.................

Thanks for the suggestion, Stick -- that's one of the options that I was toying with, until I discovered that CH4D has new ones for sale on-line at http://www.ch4d.com (item 412090, universal "C" press ram).
<br>
<br>So this ad is obsolete.

Good to hear that you'll be up and running,as per your wishes.................

Now that is a reloading area I would like to see a picture of someday!!
<br>Mike