Hi all,

I have an 870 special purpose that I want to mount a scope on. I am not having much luck in finding the correct base and rings. Can anybody steer me in the right direction?

Thank you

I think the weaver slotted one piece mount # 48345 fits it. I do some google work and find what the manufactures have listed, and/or check out the Brownell's website.

Get Burris Signature base's, its real common to need the additional adjustment.

Did you add a base to the receiver or is it a cantilever barrel?

I am going to mount the base to the receiver.

It is not a cantilever barrel.

Thanks

Here ya go.

http://www.midwayusa.com/remington-870/br?cid=14069

I would lean in the direction of a Weaver style base and not the saddle if only cuz they suck. Run some Burris signature rings in low and go kill stuff.

http://www.midwayusa.com/product/15...-weaver-style-rings?cm_vc=ProductFinding

Thank you for the help Gentlemen

Have a good night.

Passport's right - skip the saddle mounts.. They really DO suck.

One of the better Weavers to mount on an 870 is the #62 base. The position of the 4 screws fits well with the 870 receiver and it runs about $10-12 for the base..

Main thing is to ensure it's on straight and level and have the fore-most screw drilled/tapped just behind the barrel extension..