Saw this a while back. Who had(makes)it? powdr
Let me know when you find one that fits the dovetail and doesn't sit on top.
I lookin too.. I told DIProducts that I would buy the first few they made, if they would make them.
Guys I can't remember where I saw it but it was in the last few days. Too much surfing on my part. I'm almost positive though it was here on the board. powdr
Nrut: Those will not fit, as the Sakos have taperd dovetail. Or, rather shaped like a vedge.
And, I would rather order from here:
https://www.alanrhone-store.com/adv...;search_in_description=1&x=0&y=0I just mounted a 20MOA on a older Sako Forester. Fits fine and real tight!
And, you dont need that sliding mount thingy..
I have an EGW heavy duty pic rail, laying around somewhere let me know if your interested
Thanks Northman..
I don't have a Tikka and I figured their receiver grooves were tapered like Sako's..
I need one of these rails for a Sako TGR and the one in your link appears to need the receiver be D&T..
The 75/85 rails appear to be the slip-on type so I will order one for my Sako 75 short action at a later date..
Thanks again..
I have an EGW HD 20 moa rail on my Tikka. Unlike most rails, this one sits really low so you don't lose your cheek weld. It was straight too. I only used two clicks for windage when sighting in.
Nrut:
If you want a picatinny rail for the Sako Trg, I would MUCH rather order one of these! :
http://www.spuhr.biz/http://spuhrwebshop.com/en/mounts-for-trg/ These mount directly into the dovetails on the TRG, aswell as the Tikka T3.
Northman, that one is North of four hunert American dollars, ain't it?
Yes. 400-450.
But, a Picatinny rail is $100-150, and rings $100-150.
So, $100-200 more. But we or most, only own one "tactical/longrange rifle" and want the best.
What model of scope is in the first picture please?
I haven't seen one that fits the grooves, but this sits on top with a recoil pin to match the one in the receiver. $59.99
https://tikkaperformance.com/Tikka-T3-Performance-Series-Picatinny-Rail
My picaninny's rail about the way I treat them...but when I look at them I can't help myself. powdr
Love the pics of the TRG s. What is the tan one chambered for, as its obviously been re-barreled?
I have EGW bases on both my TRG 22 and one heavy barreled Tikka. The work great and look fine, aesthetically speaking.
Might contact 16 Bore on here. His dad mills LWTalley's, he might do rails also (or could be talked into it).