Home
Posted By: efw M1 turrets on an M8 6x 42mm? - 11/02/15
Anyone do this? Do the M1s click or is there an additional step to complete when going from friction adjustments?
Posted By: RWE Re: M1 turrets on an M8 6x 42mm? - 11/02/15
Just a little note, when I had an M8, I asked Leupold to put an M1 on it and they told me, "Can't."
When was this?

I've seen a number of M8's so equipped on this very site.
Posted By: RWE Re: M1 turrets on an M8 6x 42mm? - 11/02/15
Originally Posted by mathman
When was this?

I've seen a number of M8's so equipped on this very site.


about 2-3 years, IIRC.

I'll see if I can find the email.

They told me the unit was too old and the would not be able to add an M1.

Originally Posted by efw
Anyone do this? Do the M1s click or is there an additional step to complete when going from friction adjustments?


Yes, you get nice click adjustments.

Originally Posted by mathman
I've seen a number of M8's so equipped on this very site.


Yep, I have one. Don't know the vintage of the M8 offhand though.
They click, and they work goodly.

[Linked Image]
Posted By: RWE Re: M1 turrets on an M8 6x 42mm? - 11/02/15
Mine must have been too old or the tech was a jerk.
Don't mean to carry Stick's water for him, but what does this do that a Phixxed Phugger doesn't do except cost 2X as much and have nothing on the windshield?
Originally Posted by David_Walter
Don't mean to carry Stick's water for him, but what does this do that a Phixxed Phugger doesn't do except cost 2X as much and have nothing on the windshield?


Weighs less.



Travis
Originally Posted by RWE
Originally Posted by mathman
When was this?

I've seen a number of M8's so equipped on this very site.


about 2-3 years, IIRC.

I'll see if I can find the email.

They told me the unit was too old and the would not be able to add an M1.


Depends on the S/N.

Mine is an M8 and one of my most dependable scopes.



Travis
6x SS = 20.3 oz @ $299

6X Leupold with M1 ~ 12 oz @ $450 (figure the 299 leupold with $150 for the M1

Doesn't seem worth it to me.

Less weight with less capability and less adjustment range.
Posted By: toad Re: M1 turrets on an M8 6x 42mm? - 11/02/15
M1 elevation is like ~$90 IIRC. add that to a scope he already owns and it's a no brainer.
Originally Posted by David_Walter

Doesn't seem worth it to me.



You know the solution.




Travis
I paid $85 last one I sent.
Any of your 6x's you don't want send em my way.
Originally Posted by David_Walter
6x SS = 20.3 oz @ $299

6X Leupold with M1 ~ 12 oz @ $450 (figure the 299 leupold with $150 for the M1

Doesn't seem worth it to me.

Less weight with less capability and less adjustment range.


Leupold fixed 6 has about 1" more eye relief, is a (slightly) brighter/clearer scope and you don't have the windage turrett sticking out the side. It's not perfect, but neither is the SWFA. $$$ aren't the big issue for me, I'd happily pay double to get exactly what I wanted if it was an option.

David
Originally Posted by deflave
Originally Posted by RWE
Originally Posted by mathman
When was this?

I've seen a number of M8's so equipped on this very site.


about 2-3 years, IIRC.

I'll see if I can find the email.

They told me the unit was too old and the would not be able to add an M1.


Depends on the S/N.

Mine is an M8 and one of my most dependable scopes.



Travis


You are correct, I sent one in last week for a M1 elevation upgrade, it cost $90. The Leupold person said if the serial number started with a letter or didn't start with a letter that that determined if the upgrade could be done. I don't remember which one it was, but mine was ok for the upgrade.
Originally Posted by Canazes9
Originally Posted by David_Walter
6x SS = 20.3 oz @ $299

6X Leupold with M1 ~ 12 oz @ $450 (figure the 299 leupold with $150 for the M1

Doesn't seem worth it to me.

Less weight with less capability and less adjustment range.


Leupold fixed 6 has about 1" more eye relief, is a (slightly) brighter/clearer scope and you don't have the windage turrett sticking out the side. It's not perfect, but neither is the SWFA. $$$ aren't the big issue for me, I'd happily pay double to get exactly what I wanted if it was an option.

David


I'm not a huge 6x fan, but that's how I see it too... same could be said for a fixed 8x/10x/12x Leupold.

For a guy who spins a turret a couple dozen times a year... and mostly just hunts to 500 or so, the 6x-M1 combo is hardly a 'bad' choice.

If you want to spin it a couple hundred (or thousand) times, and want the more precision based reticle... then the SS is the clear choice.
Posted By: efw Re: M1 turrets on an M8 6x 42mm? - 11/02/15
Originally Posted by David_Walter
6x SS = 20.3 oz @ $299

6X Leupold with M1 ~ 12 oz @ $450 (figure the 299 leupold with $150 for the M1

Doesn't seem worth it to me.

Less weight with less capability and less adjustment range.


Fair enough; if that were the situation I'd totally be on board w/ you.

As was said, I already had this scope and thought I'd use it as a guinea pig.

Also I (sadly) have no where to shoot over 600 yds so the extra room for adjustment wouldn't be an issue. This whole build is a "do it as cheap as I can" and ironically it was my way of not buying another rifle (your Ruger). Instead I'm assembling parts I already had and in this case improving one peice: LR98 Mauset, #3 SS 6.5mm tube chambered to 260 (unsure of twist I got it here for a great price) and dropping it into a stock a buddy gave me.

I will however be buying a fixed fugger if and when I decide to go ahead.
Originally Posted by Coyotejunki
Originally Posted by deflave
Originally Posted by RWE
Originally Posted by mathman
When was this?

I've seen a number of M8's so equipped on this very site.


about 2-3 years, IIRC.

I'll see if I can find the email.

They told me the unit was too old and the would not be able to add an M1.


Depends on the S/N.

Mine is an M8 and one of my most dependable scopes.



Travis


You are correct, I sent one in last week for a M1 elevation upgrade, it cost $90. The Leupold person said if the serial number started with a letter or didn't start with a letter that that determined if the upgrade could be done. I don't remember which one it was, but mine was ok for the upgrade.
Originally Posted by Dogshooter


If you want to spin it a couple hundred (or thousand) times, and want the more precision based reticle... then the SS is the clear choice.


My M8 has been spun at least as much as my SS's and is still dead nuts.

I love the Super Sniper's but the M8 and M1's is a great combo.






Travis
Originally Posted by efw


Fair enough; if that were the situation I'd totally be on board w/ you.

As was said, I already had this scope and thought I'd use it as a guinea pig.

Also I (sadly) have no where to shoot over 600 yds so the extra room for adjustment wouldn't be an issue. This whole build is a "do it as cheap as I can" and ironically it was my way of not buying another rifle (your Ruger). Instead I'm assembling parts I already had and in this case improving one peice: LR98 Mauset, #3 SS 6.5mm tube chambered to 260 (unsure of twist I got it here for a great price) and dropping it into a stock a buddy gave me.

I will however be buying a fixed fugger if and when I decide to go ahead.


You'll be happy with the M1's.

Just test it thoroughly before stretching it out. Leupold's attention to detail can be pretty schitty at times.



Travis
I'll second that.

The half dozen or so I've played with seemed to track repeatably. But not one of them tracked in the increments the turret indicated.
I would call and check with cs, then I would send it in anyway.

Here is why. My last experience with cs, I called about changing the reticle on a M8-6x and a Vari-XIII 2.5-8x.

They said they could do the 2.5-8 but the 6x was too old.

I sent them anyway, got the call and they wanted my cc# to pay for the 6x but couldn't change the 2.5-8.

So, it might work out, send it in and ask to clean, inspect, and do any upgrades under warranty.
Posted By: efw Re: M1 turrets on an M8 6x 42mm? - 11/03/15
Yeah that's what I did; sent it off with a letter. I've gotten different answers from different people so hoping they just do it.
Instead of an M1 turret,and sending your scope in, Leupold now has knurled turrets that connect to the coin slot style adjustment. You can get them with your given ballistic data, or simply mils or MOA.

I just ordered one for a 2.5-8 that runs exclusivey MK262 Mod 1, and another that is set for MOA.

It was 50 for the generic MOA dial and 60 for the MK 262 turret.

I will let y'all know when I get them and test them out at the range. for accurate comeups.

http://bulletin.accurateshooter.com/2015/08/new-screw-on-knurled-dials-for-leupold-scope-turrets/
Do those make friction adjustments not friction adjustments?



Travis
I don't know yet. My guess is friction, but until I get my paws on them, its just a wag.
Hurry up and review those so I can only risk your money.




Travis
Posted By: Boxer Re: M1 turrets on an M8 6x 42mm? - 11/07/15
Originally Posted by Mackay_Sagebrush
Instead of an M1 turret,and sending your scope in, Leupold now has knurled turrets that connect to the coin slot style adjustment. You can get them with your given ballistic data, or simply mils or MOA.

I just ordered one for a 2.5-8 that runs exclusivey MK262 Mod 1, and another that is set for MOA.

It was 50 for the generic MOA dial and 60 for the MK 262 turret.

I will let y'all know when I get them and test them out at the range. for accurate comeups.

http://bulletin.accurateshooter.com/2015/08/new-screw-on-knurled-dials-for-leupold-scope-turrets/



McQueenSagepoos,

You STUPID Fhuqk. Are you seriously on the fence,upon whether or not your "Magic Faux Turret" has a ratcheting mechanism in it or not?!? Holy fhuqking schit,THAT is fhuqking funny!!!

Lemme tell you a little "secret"...it do NOT. Hint.

Thank me later.

The MK262 notion is equally fhuqking hilarious,because no matter what your pea-brain "tells" you to "think",the erector still shift gears in issued increments,which are .25MOA-ish. Funnier than fhuqk to pay extry,to have someone color a Fake fhuqking Turret for you,so it somehow gets warmer and fuzzier,less ANY change in it's mechanics. Read that again. Now one more fhuqking time. Hint.

Entertaininger than fhuqk,that you are under the Delusion that a 2.5-8x will track to start with and now with a Magic Turret,it'll steer gas Gun Fodder "better". How in THE fhuqk,does your pointy-head so reliably contrive so gawwdamned much STUPIDITY? Do tell!

Laffin'!

So now you've tossed 110 Clams at a heavily compromised erector and some Magic Labels,which grant you the Imagination and Pretend to try and talk about glass?!? I'm on pins & needles,awaiting your "esteemed" "feedback",you STUPID Fhuqk. Wow!

you are like watching a Jerry Lewis telethon.

Congratulations?!?

Laffin'!














'flave,

You are a MEAN fhuqker,baiting hooks in sucha fashion...she had zero clue you were fhuqking with her.

Now THAT,is my kind of humor!!!

Laffin'!
Posted By: efw Re: M1 turrets on an M8 6x 42mm? - 11/21/15
Got my M8 6x42mm back yesterday; an old one w/ V prefix.

M1s are installed!

Barreled action is ready...
The Leupold SOD system is $50 shipped
[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]
Glass quality / and field of view- brightness ..

The Leupold vs the Super sniper which one is best?
Dr,

You're focused on the wrong things. Both are more than sufficient. The only things that matter is- which is more reliable, holds zero and tracks better?
Posted By: 65BR Re: M1 turrets on an M8 6x 42mm? - 11/28/15
Which is?
EFW,
Nice click adjustments were all it ever lacked and it sounds like a perfect improvement.

I do miss those thick #4 Premier posts. :-)

Looking forward to a trophy pic that includes it and a smiling face of one of the boys.
© 24hourcampfire