Anyone know where I can get just the feeder spinner and housing? I have multiple control units, what I need are the motor, spinner and housing.
Just Google it plenty of venders out there ! Also Cabelas has them..
What exactly are you looking for? I have a bunch of spinner plates and 6 volt feeder motors. Most of the spinner plates I have are for 12 volt motors and have metal flaps that open as they are spun. May have a few 6v plates , I will have to look. I used to make my own feeders years ago out of military ammo cans, Tom
Basically, Im looking for the housing that the motor sits in, the motor and the spinner that throws the corn.
Most motors have 2 small screws that go thru the top of a metal style box with the shaft protruding. The spinner plate slides over the motor shaft and gets tightened down via a set screw. Tom
We use these.
Spinner plates They are strong enough to keep the coons from tearing them up.
Home made or commercial? If commercial feeders, try contacting the company - they usually have replacement motors and housings.