I recently acquires a 94/22m and need to scope it. Can anyone recommend which rings and bases I need. The scope will be a Zeiss 3x9 Conquest. Thanks in advance. Porsche73. It ain't the way out used to be, but it will do!
i'm a big fan of talleys.
http://www.talleymanufacturing.com/Products/Rimfire-Specialty-Rings/Winchester/1-Winchester-9422-Steel-Rings-%28for-dovetail-setup%29.aspx
Thanks for the reply. Any other recommendations out there? Porsche73
I pulled the 94/22m out of the gun safe and it has a grooved receiver. Since I know nothing about Mpdel 94/22 m ,do I need bases of some sort or merely rings. Thanks in advance for any advice. Porsche73
All you need is a set of rimfire rings for a 3/8" dovetail.
The original Weaver base for a M9422 was the T-10, but you can attached rimfire rings (as magshooter1 describes) directly to the receiver. I use Burris Signature tip-off rings on some of my rimfire rifles.
http://www.opticsplanet.com/burris-...ngs.html?_iv_code=BR-RR-SIGN1In22-420554
Thanks to all who replied. I will try to get a set of rings and shoot it this weekend if the weather holds. Porsche73