thinking about having my glock 43 done, keeps walking out of my hand while shooting.

any recommendations on who to go with?

prices are all over the place

considering these:

[url=http://www.coldborecustom.com/Home

[url=http://www.tacticalshooting.com/glock-customizing/][/url]

Bobby, get a soldering iron and do it yourself

Practice on some big legos or similar plastic first

Seconded.

http://www.thesixgunjournal.net/glock-30-grip-modifications/

There are a bunch of youtube videos on how to do it yourself

Yeah, not hard at all and can be kinda fun. I've done Glock's, M&P's, XD's; not rocket science at all.

Just use a mill file from China. Saves money in the long run.


Sorry. Go with Robar. I had them work on a old 17 and 23 and was pleased beyond expectations.

I just use a strip of skateboard tape on the front strap of my Glock 43, Works for me, and it simple.

If you don't like it, peel it back off!

Virgil B.

I didn't want to wait on cold bore custom so I went with area 15. They did a good job and was impressed. Got it back less than 2 weeks.





http://www.area-15.com/

I would rather not grind or heat a plastic frame. I have seen two cracked frames from people being a bit to aggressive. I go the other route and used devcon 10110 and texture it up with a sea sponge. Easy enough to knock it down when wet or dry to get the texture you want. I go heavier on the front strap and lighter on the sides so it does not eat skin or clothing.