I just came across a Remington 660 in .308 cal which is a one owner and in excellent condition. I don't know too much about this model other than it is based on the XP-100 action and had a limited production life. I am requesting opinions on this rifle as I am considering purchasing for my son. Indended use for Moose and Deer hunting. Are they good shooters? Any history of problems? Any aftermarket upgrades available? (stocks or triggers?) Do they have any value as compared to the model 700's?

I have owned a couple of 660's in 308 and both were very good shooters, more than adequate for hunting. With that said - due to the light weight and short barrel they have signicant muzzle blast and recoil for a 308 cartridge.

They are in high demand and generally bring a premium price, they have almost reached the status of a cult item.

I don't regret selling my 308's but I had one in 243 that I do regret selling, it seemed to be about the perfect cartridge for the 660.

drover

I had a 308 as well and shot way under an inch, hang on tho.

Dean A - have an older Mohawk 600 in .308Win and it's a great shooter (a little "blasty" due to its short barrel) but very handy in a jeep or stand. Check the serial number with Remington to see if their safety recall has been complied with. Stock config is like holding a 2X4 in your hand due to the square edges and impressed checkering not the greatest BUT at its $104 cost (new many years ago) I liked it enough to keep it. Works well with a Redfield 2-7X scope. Homesteader.

1-I have one. With scope and sling but unloaded weighs 7lbs 15 oz.
2-Do not adjust the trigger below 3#. and clean the trigger with break fluid and compressed air. DONOT OIL AND KEEP DRY.
3-Start your son off with "managed recoil" loads or beginning loads from the reloading manual.

I have a 660 350 mag I bought this year. There's a recall on the trigger from the 70's and Remington will still do the recall if it has not been done. The gent I bought mine from sent it to Remington last year. If the safety locks the bolt when in the "safe" position the recall has not been done. I installed a safety that locks the bolt closed with the safety in the safe position but allows you to unlock the bolt with the safety still engaged by pushing the safety lever down towards the trigger guard. Timney makes a 600/660 trigger with this feature. I bought an aluminum trigger guard made by cvmw here at the campfire. It good quality and Willie stands behind his product.

I have a Rem 660 in .350 mag and after reading about the origional recalls I thought mine had been updated as it has a V stamped on left side of trigger. My safety will lock the bolt when on safe. Is this not correct?
Karl

That's the truth! My grandson thought that he wanted me to buy my brothers Mohawk for him but after holding it......no way did he want it. It was a 308 and I felt the recoil would be too much for him but he just loved the looks of it but the feel of the stock changed his mind. I was glad.

That 2x4 stock sits on the front bag mighty nice, no wobble

Thanks for the info and comments guys! I guess most importantly I should confirm that the trigger/safety recall has been completed! Should I assume that if either the bolt can be opened while safety is "On", or there is a "V" stamped on the trigger it is OK? I also found the feel of the stock to be a little on the "square" side! That is why I am asking if there are aftermarket stocks or original Remington blanks available. This could be a sweet handling little rifle with a slim schnable fore end! Also,this rifle has a very light and crisp trigger pull with almost no creep. Are these triggers adjustable? How does $350 Canadian sound?

You are correct. The info online shows the bolt lock was not always removed in the 1979 recall. It is removed now. Mine has the inverted V also. My bad. I got a bit of bad info. Dave

Dean, for $350 wear a mask because IMHO it's a steal! The "V" shows the recalll has been done.

Thank's Dave. Some people don't like the stock's. Mine fit's me well and I would buy another if priced reasonable.
Karl

Dean A - want an excuse to refinish the 660's stock? With a little elbow grease those 'square' edges can be gently rounded off, enough to feel comfortable carrying, while still snug on the front bag. Will also remove the original bowling pin plastic finish so a nicer (IMO) oil finish can be applied. At the same time, remove the hard plastic butt plate and install a new recoil pad. That should mitigate objectionable recoil...does for me. Homesteader.

Ramline makes a stock for the 660.

The trigger should not be a deterent, take it to a Remington authorized warranty dealer and they will replace the trigger. I knew mine had not been replaced because the firing pin would fire when I closed the bolt on an empty chamber. It never happened with a round in the chamber but I still had it replaced.

Way back in 1973 I bought a Remington 660 chambered to the .308. I thought it was the stock that made it kick so hard so I restocked it to the Mannlicher style, wood to the muzzle. Still kicked like a mule even with a recoil pad. One year, my kids gave me a set of those Mickey mouse hearing protectors and WOW, where did all the kick go. Turned out it was the blast of my very hot reloads that made me think the gun was kicking so hard.
Then came the first recall. I took it to a remington authorized dealer for the repair and apparently they had to open up the stock for the new trigger assembly. During a couple of rainy day hunts and the stock swelled up enough to split on the inside and accuracy went all to hell. I fixed it but it was never the same regarding accuracy so when I heard about H.S. Precision making very lightweight synthetic stocks, I drove up to their plant up in Prescot Arizona and got fixed up with their very lightweight fiberthane stocke which has been on this gun ever since and is one of my all time favorites. As far as accuracy goes,I made the longest shot I ever made on a deer with that rifle and every deer shot with it has been a one shot kill. For the record, I've taken deer with thay rifle from 6 feet to 427 paces. (No rangefinders back then.) One of my hunting buddies wounded the deer and it was getting away.
One word of advice. Do not make up hot loads with H335 for that rifle. Oh they're accurate as hell but the flash and muzzle blast are horrendous. I switched to IMR4895 and while the gun still has a bark to it, it's nowhere the level made with H335.
If I had the chance to pick up another one of those rifles for a decent price, I'd be all over it like stink from a skunk.
Me and my 660 have covered an awful lot of miles together and the Good Lord be a willin', we'll cover many more miles.
Paul B.

Scoutman - got one of them. It was loose around the recoil lug. Additionally, the 600's short 18 inch barrel didn't look right with the Ramline's longer forearm... Retro-fitted the factory stock after modifying it. Homesteader.

Thanks for all the info and suggestions guys. I think I am going to jump on this one and turn it into a winter project! I will try to post some pictures when it is done. Cheers!!

worth mentioning that if you are not real fond of it as is, they make great donor actions for light weight builds...Basner makes stocks for them as well as other quality makers...I'm currently accumulating parts to build 3 light weights using 600 mohawks as donors(3 kids, and excuse to build 3 matching rifles!)

Well, I have bought it...and love this little rifle! Now I am pondering the trigger recall fix. Presently, mine does not display the telltail signs of a faulty trigger assembly (but that does not preclude this from appearing in the future). Can anyone speak from experience on how the new Remington replacement trigger assemblys perform, pull and creap? While I haven't measured mine I would estimate it to be somewhere in the 2 1/2 to 3 1/2 #pull with almost no creep at all. It shoots very nicely! I would hate to replace it with a heavy pull factory clunker!! Any advise??

I "had" a 660 in .308 for about an hour. Bought at a shop on my way to the range and when I got there one of my good friends who lets me use his cabin in the middle of no-where Maine was there...he saw the gun, offered to buy it and I never even fired a shot from it... But since I already had a .308/600 with the vent rib it was no great loss. He used it for his still hunting rifle for 7-8 years and sold it just last year...

As to the trigger don't waste your time having Remington "fix" it...buy a Rifle Basix or Timney and just replace it. I put a Rifle Basix in my 600 and a finer trigger is not possible...

The 600/660 were way ahead of their time and I only wish I had bought one back in the late 60s when I started hunting than the 700/06 I did....

Bob

What has been said is basically true, but I remember the one I had came with a 20 inch barrel not an 18.5 inch like the original 600's.
Mine is now a full custom in .25-284 with a McMillian Mountain Rifle stock. It has an Rifle Basix trigger that I'm very pleased with.
I've been so happy with mine, that I've considered buying another and simply having the barrel turned down, and doing a McMillian M7 stock for it. Would make a great, light weight hunting rifle. E

Here's my 308. It's been thru some changes.

There are two M660s in 308 for sale on www.simpsonltd.com today.

Thanks for the heads up, I think that I'll call them on Monday and ask about the less expensive of the 2 Remington 660s in 308.

Jeff

223 & 35 Rem (Actually 600's not 660's)

I have a few 600/660/600Mohawks around.

Have 1 with a 700 MR-DM 260 barrel that I put together, but never use as often as some of the other 260s, so I'm going to pull the barrel and put a 1-8" ROT 22-250 barrel on it.

Jeff