Home
Posted By: 2003and2013 Savage ml 10 guestion - 01/06/17
Here is the story my dumb a-- put 2 bullets in the gun and fired it, it has swelled the inside of the barrel about 1.5-2
inches above the end of the bridgeplug have shoot it after it happened, but since have put another barrel on,just to be on the safe side do i use it for a corner stob, also have a friend looking for a savage ml50 barrel
Posted By: 30338 Re: Savage ml 10 guestion - 01/06/17
Not sure what a coner stob is, but if it doesn't involve power and bullets, yes the swollen barrel should be good for that.
Posted By: 2003and2013 Re: Savage ml 10 guestion - 01/06/17
You have to understand country spelling corrected corner
Posted By: Overkill45 Re: Savage ml 10 guestion - 01/08/17
Check with Luke at www.smokelessmz.com. Im sure he will know somebody with a 50cal take off or he can hook you up with a custom barrel.

I would not even bother with a factory barrel if i had to replace one. The aftermarket barrels are so much better. He stocks mostly 45s but can order you one in 50cal. My Savage barrel would never come close to a Douglas, Mcgowan or Pacnor and it was a pretty good one.
Posted By: samson805 Re: Savage ml 10 guestion - 01/09/17
As overkill 45 said you should be able to find a stock take off barrel for next to nothing$. The aftermarket 45's are nice but it depends what type of hunting you are doing. If you need to reach out and touch something over 200 yds then go with a .45 if not the stock 50 will still be fine for you.
Posted By: 2003and2013 Re: Savage ml 10 guestion - 01/11/17
Dont have the funds for the custom barrel have made kills at 235 with my barrel till i screwed it up still looking
Posted By: 4ager Re: Savage ml 10 guestion - 01/11/17
So, what the Hell was the question?
© 24hourcampfire