It is without a doubt, the best gift I will probably ever receive from a friend, other than the friendship itself.
Well said. I wish that I could come up with something as good. Beautiful rifle. miles
Miles, you already have, my friend.
Wow! That stock shames anything I've ever held in my hands! What a beautiful, trim, sleek firearm. I imagine it balances perfectly?
The things that are sold today that are called firearms are not what that is. I don't know what they are, but that, that is a firearm. And I agree with you Paladin: your good fortune at calling Ken Howell a friend far outshines your good fortune in owning such a piece of craftsmanship and beauty.
Thanks for posting. I feel special now!
Thanks to you HuntnShoot. Balance is indeed exquisite, a fine, sleek, and sexy firearm, to be sure. To take nothing from your statement, probably not as special as I feel.
David,
That is an exquisite piece of art! If it shoots as good as it looks you will have a rifle of a lifetime.
Ed
Ed, if I never put a round downrange, it is already a rifle of my lifetime (I know what you meant
).
So, Paladin, when are you gonna punch it out to AI?
Way ahead of you pal.
Not long after taking those photos, I clamped the stock in my vise, then put the ViseGrips on the barrel to unscrew it so I could get it re-chambered. I think it was the cheek piece that let the stock slip in the vise, or I didn't tighten the vise enough, so I put a 3' cheater on the vise handle to help out.
I figured the 8" ViseGrip pliers would have been strong enough to unscrew the barrel, but I could never get the dang things tight enough to keep from slipping (you would think those curved jaws with the serrations would work better than they do).
I tried again to unscrew the barrel with a 24� pipe wrench until I heard the cracking, which I thought was the wrench slipping again. Except I had replaced the worn jaws the first time it slipped, then I saw the lengthwise split just back of the trigger guard through that really nice fine-line checkering in the grip.
Realizing the stock wasn't holding up, I found a piece of re-bar that almost fit between the scope and the action (took a little persuasion with a 6lb. hammer) that I was able to wedge against the vise table that kept the whole works from turning. I finally figured out those barrels have right hand threads and got the barrel unscrewed. Man was it tight.
A little repair work to do and maybe have to replace the stock, but I think I can make it work, except possibly for the scope (those things aren't as tough as they look). If I can find the time to get started and don't loose all the parts.
If I ever try to take a barrel off another rifle, I think I'll start by clamping the fore end in the vise instead of the butt of the stock, especially if it has a cheek piece (does that make it a butt cheek?).
Disclaimer: The above isn't real. The rifle remains untouched by vise or other implement of destruction.
Although I never met the man, I'm not sure P.O. himself would even try something with a rifle this..., never mind. Probably not much he wouldn't have or didn't modify.
Absolutely beautiful. Try 52gr IMR4350 with your 100gr bullets. My old gun smith told me that if a .25-06 won't shoot that well, it needs some help. In my limited sample of four, he was right.
shootinurse, thanks for the tip, I'll try it. I don't know if I've ever shot anything but H4831 (or SC) in a 25-06.
David