Home
As promised

416 WBY Classic mark II

[Linked Image]

[Linked Image]


116 gr H4350 300 Barnes TSX 3140 fps .65"

[Linked Image]

117 gr H4350 Barnes TSX 3165 fps .6"

[Linked Image]

Glad that H-4350 is workin out for ya Fotis.

Gunner
It sure is buddy! I am pleased. Close to 1/2 MOA from an elephant gun!

Wish I can find a High BC 416 Bullet! cry
Axe and ye shall receive. grin

Cutting Edge Bullet MTH-V11

350 gr HPBT LR hunting bullets.

B.C.-.550

They aint cheap, but they will fly. wink

Gunner
I have used them before in my 375.

Single load proposition
What grain TSX? Nice Classicmark!!
300 Barnes TSX
Good shooting, too! cool

That 416 obviously didn't make you a flincher.
Originally Posted by Fotis
I have used them before in my 375.

Single load proposition


This bullet is for bolt guns Fotis, the driving/sealing bands are located for factory COL's in standard hunting rifles and will be into the neck of the cartridge case.

Gunner
I tried their 300 gr in my 378 Bee and I had to single load. I might have to try these also.
Also tried the 230 Raptors in it too.

Expensive SOB's though.....
Yessir, they are high, but if ta wanna, you can run that Big 416 WBY out to 1000 yards with these bullets just like a 300 Magnum. shocked grin

Gunner
TRUE TRUE
I found the 4350's the best powder in all 3 of my .416 Wby's.
You chose wisely, as always POP.
John
Thank you John!
350gr TTSX results? Prefered powders?
That's some serious woop azz (3165 fps) 350 gr., how's your fillings, still intact ?

Tacksmacker
© 24hourcampfire