Suppressed 300 Win. Mag. - 24hourcampfire

One of my Remington 700 rifles in 300 Winchester Magnum - built for long range shooting!

[Linked Image]

WOW!

Clean looking rig.

Dumb Question.. Did you have slippage on that setup to have to use 3 ringsets?

Originally Posted by Oldelkhunter

Dumb Question.. Did you have slippage on that setup to have to use 3 ringsets?

No slippage whatsoever! Plain and simple, the 3 rings just made for a rock solid mounting system. The action was drilled/tapped for the larger 8-40 screws and the base was machined, so that once the rings were installed and the scope was mounted, sight-in at 300 yards with the scope optically centered, windage was off less than 3" at that distance.

What make of rings are they?

What brand of can? Good looking rig. Barrel length, contour?

Nice looking rifle. Should work just fine.

Originally Posted by PR6284

Originally Posted by Oldelkhunter

Dumb Question.. Did you have slippage on that setup to have to use 3 ringsets?

No slippage whatsoever! Plain and simple, the 3 rings just made for a rock solid mounting system. The action was drilled/tapped for the larger 8-40 screws and the base was machined, so that once the rings were installed and the scope was mounted, sight-in at 300 yards with the scope optically centered, windage was off less than 3" at that distance.

Thanks for the reply

Conrad101st - Those rings are Vortex.

375fan - That is a SilencerCo Omega. Thank you! Barrel length is 28" and the contour is a straight taper to .750 at the muzzle.

Hammerdown - Thank you. This rifle is going on a prairie dog shoot in a couple of weeks and then to Africa at the end of this year or the first of next year.

Oldelkhunter - You're welcome.