$99 98 Mauser trigger guard!! - 04/09/08
Got a complimentary Sportsman's Guide in the mail. They're advertising a 98 Mauser hinged trigger guard. Says it's blued-steel. $99.97!!! Anyone familiar with it?
til later
til later
Re: $99 98 Mauser trigger guard!! - 04/09/08
Re: $99 98 Mauser trigger guard!! - 04/09/08
BIG THANKS bcp!!!!!!!!!!!!!!!!!!!!!!!!!
til later
til later
Re: $99 98 Mauser trigger guard!! - 04/10/08
I have one of those and if you're not too particular, it'll work just fine.
BTW, it's the same one that Gun Parts Corporation sells for $82.65.
Rojelio
See if this link works.
http://www.e-gunparts.com/DisplayAd.asp?chrProductSKU=881550A&chrSuperSKU=881550&MC=
BTW, it's the same one that Gun Parts Corporation sells for $82.65.
Rojelio
See if this link works.
http:/
Re: $99 98 Mauser trigger guard!! - 04/10/08
Whew---that is a lot cheaper than the Ted Blackburn metal I am getting but it is not exactly the same.
Re: $99 98 Mauser trigger guard!! - 04/12/08
blackburn is top of the line & usually has a very long waiting list. i prefer to make my own.
bobs gunparts has fn hinged bottom metal for about $40 & about $15 for the latch & pins,but they no longer have any of the floorplates so i had to convert a military floorplate to work.
i also convert military triggerguards by adding a hinged floorplate & sculpturing the trigger bow.
on the bottom is one of my converted fn t-guards from bobs, i still have to do a little tweaking on the floorplate where i welded on a peice of flatbar to make it a straddle style, i made it a litttle longer than normal.got about $60 in it.
middle is just a standard military guard & top is a sculptured & hinged triggerguard that i converted from a 2 hole turk guard. i'm still shaping the release lever. got a whole $15 tied up in it so far
![[Linked Image]](http://img.photobucket.com/albums/v36/dirtyjim/3tguards.jpg)
bobs gunparts has fn hinged bottom metal for about $40 & about $15 for the latch & pins,but they no longer have any of the floorplates so i had to convert a military floorplate to work.
i also convert military triggerguards by adding a hinged floorplate & sculpturing the trigger bow.
on the bottom is one of my converted fn t-guards from bobs, i still have to do a little tweaking on the floorplate where i welded on a peice of flatbar to make it a straddle style, i made it a litttle longer than normal.got about $60 in it.
middle is just a standard military guard & top is a sculptured & hinged triggerguard that i converted from a 2 hole turk guard. i'm still shaping the release lever. got a whole $15 tied up in it so far