300 RUM Imp
Stillar Tac 300 LA with a pinned stillar 20moa rail/seekins rings
Lilja 3 groove, 10 twist, Remington Varmint Contour, 28 1/2"s with a flat top/bottom Shrewd break, pinned PT&G .250 recoil lug and fast twist flutes
Mcmillan Gamescout Black, Purple and White McFlame
PT&G Oberndorf BDL BM with a wyatts extended center feed mag box
Jewell trigger
Nightforce 5.5-22x50mm NPR1 HS ZS
11.4#s without bipod
Built buy Cody's Custom Guns

Little bit of load testing after some fire forming..

210gr Berger VLD's, 3 shot groups all @ 200yds







300 RUM Imp with a 6x47Lapua on the right

That dog will hunt - congrats!!

RD, nice build...a true LR hammer!

SWEEEEET !!!!

Very nice!

Wow, sweet build. Stock turned out awesome! And shoots as good as it looks. Congrats!

HOLY MOLY That is one BAD ASS rig !!!!!
Great combo of components, first class all the way!!!

What powder are you running??

Wowzers, the very definition of a hot rod rifle there!

What are you plans for it? Just long range targets or will you take it hunting/critter sniping?

Amazing 200 yard groups there, too!

Wow, that is a mean setup. How are you making brass?

WOW nice Rifle!!! Bet that bullet will hit like THOR's HAMMER way down range...THWOPPP!!! ScottyO.

Thanks guys for all the compliments This has been a fun build and its now time to put it to work!!!



Thinking its going to be the Ultimate true LR Hammer




Started out with 4000MR but although it shot good I feel its a little to fast of a powder for the 210s. it would be a much better powder for the 190s though.



It will be doing a little of everything its going for a week trip next week for some LR Chuck Kill'un...



Brass is a simple load n shoot fire form! loaded up 150gr hornady SST with 4000MR, amazing accuracy also with unreal speeds




as you can see below what Thor's Hammer is going to be ....


Did a little more testing yesterday with H50BMG powder, got speeds up to 3120fps but these two loads shot the best and Im happy with a speed of 3055fps with a ES and SD of this load and only 21.7 MOA with 1878fps and 1645ft-lbs of energy @ 1000yds... Gonna be a winner

Kevin you sure know how to build them
Rob said y'all had fun yesterday

Can't wait to hear how it works on the chucks at Tims place

Nice rig!

Out of curiosity, any reason you picked the 210s over the 230s?

-Dan

MONSTER friggin' cool, RDSHOOTER!

That is a sweet stick man!!! Great build.

Reno

Thanks guys, I'm very happy with the way it turned out, very mild recoil and the way it shoots...




Dan, I basically chose the 210gr because of it having less wind drift than the 190gr or the 230gr vld, it has plenty of speed and energy a ways out there also. if the 190s ever become more available I will be doing a little testing with them at some point..