Just wondering who has received a stock recently, and what your order date was. Still waiting on one ordered in November.

September and received in March.

Early october and it arrived about a month a ago and mine was for a Ruger which I think sometimes runs a little slower than some of the more higher volume stuff.

October 13th and almost 7 months to the day got my notification. Should be here tomorrow.

Last year ordered in December and got it in July, so 7 months seems to be the going rate.

Glad to see Mcmillan is catching up somewhat.

7 months puts me mid june, hopefully.



I remember the days when it was 12-14 weeks...lol

Whatcha building now?

ordered mine on December 1st. My builder is still waiting on it, then he will build my rifle

Sold the wood stock from my Sako 75 .22-250. Ordered a tan speckled replacement...

After selling the stock and optilocks, the mcmillan cost me $50...:)

Ordered one in November. I expect it in July. 8 months has been the norm for my last three stocks...

January, still waiting.

I'll have to dig the barreled action out, just to refresh my memory,

Winchester Short action Hunter I'm thinking.

I just ordered two Edges for a Sako 75 in 257wby and a Sako 75 in 22-250 I'll be building this fall.

Showed up yesterday. Ordered Oct 13th.

Looks good!

I ordered at end of November and expect 8 months.

phouk I hope mine gets here in time to get built for hunting season, I hope its worth the wait.

10/26 and no word yet

Mink- is that a left hand stock cut for a right hand bolt?

Yes it is, I am left eye dominant.

No chit.
Definitely one of Mcmillans pluses. They'll do about anything you can ask for.

Is that a Hunter? What rifle is in it?

Thats nice.. Makes me wish I did a woody with the red pad for my Ruger African.

Sako 75 in 30-06 and coated in Birdsong Black-T. Yes, definitely a plus. Finding a LH Sako in a LGS is like finding a gold hens tooth.

Nice rifle.

I just picked up a older L61R Finnbear in 30-06. Heavy fugger. The plan is to put it in a McMillan and rebore to 9.3x62. You ever run the Sako Classic? Kinda torn 'tween the Classic and the Hunter.

I may have to keep it 06 for a while though!

M70 New Hunter ordered in Jan. Not expecting to use it this hunting season. Edge fill w/speckletone finish. First Micky for me - I'm hoping good things come to those who wait.

You ain't the only one brother, we left eye dominant right-handed monkeys don't get a lot if attention, lol.

No, only done two so far, both Sako 75's so have stayed true to that pattern. The other, formerly a Gray Wolf, which was heavy as hell. The McMillan shaved a pound off just in standard fill.

I ordered mine on Dec 26th, talked to McMillan a couple of weeks ago, and they said it should be ready first part of July.

slickyboyboo, that's good news I ordered mine Dec. 1.

I hope the quality is great

Nov 5th for a edge fill speckle tone. I hope to hear soon.

Nov 11th order date for me & then another one only couple weeks ago.

ordered one Dec 4th, nothing yet.

Its funny I posted last night. Just heard this morning that my stock is shipping today. Exactly 6 months.

What model stock and for what action? Just curious. They tend to do them in batches.

I am curious too!!

Left handed Game Scout, Edge Tech for a Pierce Ti long action. Can't wait to see how this one comes out.

Hah! Doubting they had a huge run of LH Game Scouts for Pierce LA's!

I'd like to may with a Gamescout. They look like they'd be pretty sweet.

looks like the winter time is our slow time theory is gone now...

no slow down in the gun building industry its about 6 months for anything these days

I think McMillan has been claiming 4-5 months for the last 5 years, haha. Just count on 8 and you won't get impatient.

They do the runs according to stock design, not inletting. Mcmillan builds a lot more Game Scouts than say, Ruger R series stocks. Thus you are more likely to get a popular stock design quicker than one which is less so.

ejo, good news, I ordered mine Dec. 1st. Remington Hunter Swirly, shipping to McWhorter, hope to get an update from Tim soon...

HELL YES !!

Ordered my rifle December 1st, Got a call today from McWhorter Rifle is FINISHED !! So he must have gotten the stock from McMillan last week, little over 6 months!!!

Still waiting for my Nov 11th order of my Rem Hunter - cannot get hold of Rick Bin so he can check for me.

Anyone know if Rick is around or if he's out killin' stuff??

I ordered in January and was beginning to wonder, guess I got a while to wait.

Same here, I ordered mine on 4 Feb 2014 (Pre64 Monte Carlo) for my Alaskan. Looking forward to getting the stock.

Ordered mine November 17.
Got my notification yesterday.

Standard fill McSwirly for M-77 Hawkeye.
Mike

Mine was on my door step last night............C'mon BAT!!

Dibs on whatever 300 is building....

W

Nice.......LOL!!!

Still waiting...

I ordered one on 12/8,This one is going on 7 months. The last one that came in March was six months to the day.

Ordered mine 11/29/13.

FYI.

Ordered one at end of November and just got it. Rem Mtn rifle.

Same here. Same pattern, same time. Tracking says mine will be here tommorrow.

been waiting for a classic model since jan.

I would think somebody would come along and start a company to give them some competition at some point with these long wait times................

I ordered a Rem Classic 12/6 from here. No word yet

Manners is doing just that, though their hunting stock patterns are limited at this time.

Sent an email to Manners asking if they can inlet for a sako aii action. Didn't even get a reply back. Unless these stock makers inlet for something other than a rem 700 they won't be much competition. My Mcmillan A 3 sporter inletted for a sako AII action should be here by January .

Everyone makes a Remington stock, it is the other brands where McMillan has a niche. I priced out a Manners and it was actually more money than a comparable McMillan.

Just ordered one. Let the miserable wait begin.

Ordered a McMillan Hunter on Jan. 20...not really expecting it before September.

Same here... Figuring about after Christmas sometime.

You're dreaming. I'm at almost 8 months...Xmas is only 5 months away. Figure next summer.

Just received notice, stock is in mail. So it was just over 8 months, closer to 9 before I get it. Ordered Nov.11

Got the email today. Mine was ordered 11/29/13.

A1-3 McCamo ordered on Jan 3rd is ready to ship.

Rem Classic swirly ordered on Dec 17th is ready to ship.

Ordered 2 Hunter's Edge stocks on Dec 11th and no notice as of yet.

What is the mix on the swirley??? 😄

Yellow and black....for the 257 Bee. What else??

Just talked to Kay at McMillan, and she said my McMillan Hunter I ordered on 12/12/2013 will ship in about 2 weeks. Looks like they are running at almost an 8 month turn around right now.

8 months is fine if they stated that up front. Still not sure why McMillan claims 4-5 months when you place an order.

I think the theory of not adding machines and people because of the slower time in the winter is gone now .........7 months on a classic model and still waiting......oh well hopefully soon

Good question.

Ordered one on 12/8 through 24 and it's ready to be shipped. Talked to McMillan about another stock and asked about this one and they told me they received the order on 1/6. So that was almost one month before they got the order.

Got notification that mine shipped yesterday, a bit over 7.5 months.

Man. I am hoping mine gets here in enough time to get it set up and ready to hunt. Starting to sweat a little.

ordered mine last august. received it february

Ordered mine in February and was notified yesterday it was ready to ship. That's just over five months. I am wondering if it has anything to do with paying for it in full when I ordered it.

I ordered one mid-December and one the first week of January, payed for both up front and neither of them have been shipped yet..

Same here, mine was paid upfront.

After 8 months I got mine a month or 2 ago, worse quality I have ever see of any maker. Sling stud was WAY off center, the seam was awful, needed to be reinletted by my smith to get the barrel to lay centered in the barrel channel. Just the worse. Im done with McMillan. sucks to wait 8 months and then need to be charged more to have the stock made right, still have a cock eyed front sling stud I need to look at everytime as a reminder of the great McMillan quality.....

3rd person I have heard that from here lately. Hoping mine is done right but I am starting to have my concerns. 7 1/2 months into the wait and I am getting nervous I went with the wrong company.

Ordered mine from rick jan 6th and got the email today saying it is ready to be shipped.

Please post pictures.

My January ordered one shipped today but not the December one yet.

I ordered my latest McMillan on 12/18 and just got notice that it is ready to ship. Should have it in hand sometime late next week, though the post office is easily capable of taking twice as long.

7 1/2 months seems a bargain for something that will last me literally forever...............

Just got the word that it's being shipped - this will be right at 7 months.

Will post pics on Speckletone Finish thread after I fondle it thoroughly.

One of mine showed up today. One day short of 8 months.

Mine showed up today.....just shy of 7 months.

I totally agree.

I still feel like a kid at Christmas waiting on mine!

UPS pkg on the doorstep last nite. 7 months + 4 days. It don't look too bad (understatement).

Remind me, Scotty. Newton or Alaskan?

The McMillan is going on the Alaskan. I'm gunning for a Legend for the Newton. Although, the B&C Medalist isn't chopped liver that's on there now.

Ordered two pre-64 model 70 Edge stocks november 15 and still don't have either. 9 months and 10 days now...sucks!

Damn...I wish I knew what their reasoning was to the sequence they work to.

I ordered a LH Winchester M70 Edge Supergrade pattern stock on December 17th. Got the email last week, August 20th, that it was ready. 8 months waiting on it to be built...and these next few days waiting on it to show up will be the longest.

When you get that supergrade pattern, it would be great if you could take photos of it on the stock template and add it to that thread of McMillan stock patterns that I started several years ago. The Supergrade is one that I did not have access to when I took my photos.

Isn't the second one down in your first post(s) a Supergrade?

My last one took 8 months, and the funny thing is it had a "rush" sticker on it when I got it.

Like from the band?

Got the Call today, seems 7-8 months is the norm. 7.5 for this one.

Mine are on their way - released this week. I could have had a baby faster.

Has anyone received a Remington Edge stock lately, I'm going on 9 months and still nothing, waiting on a Remington Classic in Edge Tech, tried emailing Rick a few times but don't get any responses.

[bleep], they've got 100 or so that are ready-to-order on their website tonight. (Not counting specials) Just don't be as picky.

I have already paid for mine so that's not really a option this time.

I'm waiting for my stock as well and this is what I received from McMillan...

Important EXPORT Notice:
Due to recent determinations at the US Department of State, McMillan Fiberglass Stocks now requires an export license to ship fiberglass stocks internationally. An export license may cost up to $250.00 US Funds. McMillan understands that there may be varying country requirements and wishes to make the export process as painless as possible, but you can use your own exporter.

To export out of the US you will need to purchase an export license and certain countries also require an import license, which we will need a copy of it. If an import license is not required, then a document must be signed stating so. The export license is usually valid for 1 year and it can be for one stock or for multiple stocks (open license) being shipped to the same address.

McMillan has an onsite export manager with experience in exporting internationally. Additionally, we have agreements with several international partners in various countries that can facilitate the export process.

They expect to have a Canadian importer in place in the next couple of weeks so hopefully stocks will start shipping North again.

Hmmm, got the email yesterday - stock is ready!

Time to put in my next order.

The one I ordered on 8/4/14 is on the truck and headed my way.

Still waiting on two ordered third week in March. Nothing exotic, both Rem 700 SA. One Gamescout and one Edge. Don't understand how McMillan can be shipping orders made in August and I'm waiting 10 months. Better make a phone call I guess.....


X-VERMINATOR

I just received notice that the one I orderd December 2013 is ready to be shipped, mine was for a Remington 700 too.

I ordered a Hunters Edge for a Model 70 Classic back in June & got an email a few days ago that it's ready to be shipped. Probably earlier than I expected but I'm not complaining!