Thinking of having my rifle coated and I can't decide which color cerakote. I am currently torn between armor black and tungsten. If you have a cerakoted rifle or pistol I would like to see it. There are to many good options!

What color is the stock on your rifle?

I plan to have my stock coated in Hunter Safety Orange & then Tiger Stripe it.

Here's my 338 Federal Redneck put together. Tungsten Cerekote w/ grey Leupold VX-7, fairly close color match.

I'm a graphite black kind of guy.

Nice. My stock is a painted black edge.

I tend to paint anything I hunt with. The pistol was painted because the original finish decided to rust.

OD Cerakote









Graphite Black Cerakote

Graphite Black Cerakote (continued...)





FDE Cerakote

Either of those would be a fine choice with the black stock.
It really depends if you want some contrast or not.

Are you having Nathan Chesney do the coating? He coated one for me recently with a bit more hardener for a soft sheen. It turned out great.

Sending the parts to long rifles inc in a couple days. Let's see some more.

Graphite black is tough to beat

Sniper Grey but mine's a shotgun and wasn't invited


Mike

I guess I could checkout a shotgun;) that is another color I was thinking about.

Graphite black is nice/common, but I've been liking midnight blue cerakote lately....:

Nice sniper grey on that wingmaster. I had a model 70 30-06 coated in this color:

I like that!


Mike

Ok, not black or grey, but the stock is in Forest Green and the barrel and action is in Gold.

Baylor colors?

Sniper Gray is my favorite.



Blue Titanium



FDE



Another of my favorites! This one is painter's tape blue - it's a custom blend.

That sniper gray is real nice. I have filled out the paperwork and it is going to be armor black.

A buddy has the armor black and it seems to show a lot more " marks" than the graphite black. It is very flat.

Of course!

Another vote for the Graphite Black.

[quote=whitebread]I tend to paint anything I hunt with. The pistol was painted because the original finish decided to rust.

OD Cerakote

What is the barrel contour on this one

Me too.

The stock on this one is Tungsten and the metal is Titanium.

Sniper Grey/Sniper Green...

Man that is a very close copy to the color of the original KS Stocks from Remington's Custom Shop. Well done

Naw. Just matches his front teeth. :-)

O.D. Green





Same rifle in Sniper grey. I didn't like the color and repainted.





Tarjec green. A shade darker than O.D.

Graphite black.

I prefer the Midniht Blue.. looks like real blueing in photos.

Front: Tungsten
Shimmer Bronze
Titanium
Burnt Bronze

I love that burnt bronze. I'm planning a 6x47L varmint weight rifle with burnt bronze. It's about as pimp as I'll go......with rifles anyway.

Did you just ask for the "McWoody" color on this stock ? I see they have two different choices for this ..."med McWoody" and "dark McWoody"...

RD,

That is a dark McWoody with red pad.

Who are you guys using to do the coating?

I do my own. It's a little cheaper that way.

This is my 17-204 in coyote tan

Bartlein GAP #7 contour. Similar to the Bartlein M24/M40, but with a 4" shank.

Too bad you couldn't find a decent piece of wood for that 17-204

Nicely done!

Graphite Black on the metal on this one.



Graphite Balck on the stock on this (a little extra hardener added to get a little more sheen)



MM

Midnight Purple, which i've recently discovered from Charley Santoni of CS Sports, who finished my Pre 64 in 9.3x62, seen here, is no longer available....darn it, because I wanted to use it again for a 6.5x57BR i'm having built.

Alan