I have a Model 99-358 page 3-78 of Murray's third edition book.

I need the barrel stud that fits in the dovetail slot on the bottom of the barrel that hold the forend on.

There are several different types. The one I have is to short in the dovetail slot.

Will pay good money.

Thank you.

Sure you don't need a longer forearm screw? There are two lengths.

I've never seen much variation in the barrel studs.

Are you replacing a stripped one?

"I need the barrel stud that fits in the dovetail slot on the bottom of the barrel that hold the forend on."

Will your forearm screw screw into the current stud (without the wood)?

I only know of a couple stud/screw combos

1. 99-11 barrel stud.

And you use the longer screw 99R-421 for the R&F and the 99-421 short screw for the EG.

The Brush Gun, I couldn't tell ya.

Sorry it is not the screw length.

I will buy any stud that fits the dovetail.

Thanks

The supply of these has pretty much dried up.

They show on ebay now and then so monitor there unless someone here has a pocket full.

I've got an extra.

* I should add that I only know of one size.

The only variation I know of is on the post war F which has the barrel stud soldered (or welded, or?) on due to the lightweight barrel.

Fireball 2

PM sent.

Monday morning I am leaving for the Shot Show.

Thanks

PM sent John.