7" 01 EDC - 02/25/15
Waiting on supplies to come in so I took a piece of 01 tool steel that I had in the shop and started grinding. Tapered from .220 at the butt down to less than .120 at the tip. Heat treated and double draw tempered to HRC 60. Scales are birds eye maple that I added some blue dye to the stabilizing solution. Hand rubbed satin finish on the blade. Stainless bear paw mosaic pins and lanyard tube.
Sort of an every day carry size of 7 inches overall.
Sort of an every day carry size of 7 inches overall.