Page 1 of 1 1
Topic Options
#2282663 - 06/29/08 11:34 AM Hotel knife...
varmintsinc
Campfire Ranger


Registered: 06/25/04
Posts: 2235
Loc: East Bay, California

Offline
It took me forever but its finished. The name comes from working on it while on the road and being stuck in hotels, keeps me out of trouble and occupies my down time. I did drill the handle for the tang but everything else was done by hand with files and sandpaper. Blade is a Laurie Progression Tempered Pukko. They indicate the spine is about mid 50rc and the cutting edge is 63! Filing and sanding was a pain and you can see the temper change about 1/4" up the blade edge. I have the same blade as a shop knife cutting everything needed and it has not shown itself to be brittle or chippy at all, takes a fabulous edge and will take the hair off without touching skin. Not bad for a $20 blade. I have one blank and the bottom two blocks left, the next one will be a very non traditional pukko, still working it out in my mind.





_________________________
Brag about how close you got not how far you shot.
Hunt hard, kill clean, waste nothing and offer no apologies.

Top
#2283006 - 06/29/08 02:59 PM Re: Hotel knife... [Re: varmintsinc]
Boise
Campfire Ranger


Registered: 02/05/01
Posts: 1709
Loc: Boise, ID, US

Offline
Appears to me it came out very nice.

A couple of questions if you don't mind:

1. What were the pins use for? (three shown in the top photo)
2. How is the handle secured? You mention drilling the handle for the tang but is the tang meerly pushed in and glued in place?

Top
#2283156 - 06/29/08 04:47 PM Re: Hotel knife... [Re: Boise]
varmintsinc
Campfire Ranger


Registered: 06/25/04
Posts: 2235
Loc: East Bay, California

Offline
My bad, the pins are getting used for another knife. To attach the handle I cut groves in the tang and used a rough cutter in a dremel to leave plenty of bite in the wood. Secured everything with a 90 minute, waterproof epoxy. Wood was finished with superglue and taken to a 1000grit polish.
_________________________
Brag about how close you got not how far you shot.
Hunt hard, kill clean, waste nothing and offer no apologies.

Top
#2283278 - 06/29/08 06:00 PM Re: Hotel knife... [Re: varmintsinc]
VAnimrod
Campfire Oracle


Registered: 04/21/04
Posts: 26222

Offline
That is one very, very nice knife. Very well done.....
_________________________
The right of the citizens to keep and bear arms ... the palladium of the liberties of a republic

3 J. Story, Commentaries §1890, p. 746 (1833)



Top
#2283358 - 06/29/08 06:35 PM Re: Hotel knife... [Re: VAnimrod]
Topgunbill
Member


Registered: 08/18/05
Posts: 51
Loc: Northwest Pennsylvania

Offline
Very nice knife.
Top
#2284317 - 06/30/08 09:27 AM Re: Hotel knife... [Re: Topgunbill]
fish30ought6
Campfire 'Bwana


Registered: 06/26/02
Posts: 10006
Loc: On the Warrior River

Offline
Yep, a fine one.
_________________________
abiding in Him,

><>fish30ought6<><

Top
#2284399 - 06/30/08 10:15 AM Re: Hotel knife... [Re: fish30ought6]
1234567
Campfire Regular


Registered: 11/26/07
Posts: 704

Offline
Good Job. That progressive tempered blade should be a winner.
Top
#2302602 - 07/10/08 09:14 AM Re: Hotel knife... [Re: 1234567]
elkhunter76
Campfire Guide


Registered: 12/17/06
Posts: 3443
Loc: Wyoming

Offline
Very nice work. Looks like a great knife to use!
_________________________
"I like my dogs better than I like most people. And if they don't like you, you don't have a chance with me!"


Top
#2305097 - 07/11/08 01:41 PM Re: Hotel knife... [Re: varmintsinc]
stumpy
Campfire Regular


Registered: 02/20/07
Posts: 897

Offline
I like it! How many hours you figure your have in it?

Nothing like the feeling of accomplishment after finishing a project.

stumpy

Top
#2309992 - 07/14/08 12:04 AM Re: Hotel knife... [Re: stumpy]
varmintsinc
Campfire Ranger


Registered: 06/25/04
Posts: 2235
Loc: East Bay, California

Offline
In actual work I probably have 20-30 hours into it, hand shaping the handle from a block and filing the blade to fit the guard ate a bunch of time.

Using power tools I would figure about 1hour to polish out the blade and another hour to take the handle from a block to final form. After that speed will depend on the handle finish. A coat of superglue goes on in a few minutes, sets about an hour and then light sanding. I think this was three coats, one sanded to 400, one to 600 and the final coat at 1000grit. The blade ended up at 1000 for the bevel and 600 for the flats. I know its heresy but I put a micro bevel on with a fine ceramic rod and it is the sharpest knive I have ever handled. So far three people have handled it and all three walked away bleeding....
_________________________
Brag about how close you got not how far you shot.
Hunt hard, kill clean, waste nothing and offer no apologies.

Top
#2344864 - 08/01/08 08:08 AM Re: Hotel knife... [Re: varmintsinc]
carbon12
Campfire Regular


Registered: 03/30/05
Posts: 351

Offline
varmintsinc,

Where did you get the LPT blade for 20.00? I am interested in ordering one or two.

Top
#2345161 - 08/01/08 09:59 AM Re: Hotel knife... [Re: carbon12]
varmintsinc
Campfire Ranger


Registered: 06/25/04
Posts: 2235
Loc: East Bay, California

Offline
http://www.northcoastknives.com/northcoast_knives_Blades7.htm

He is out right now but if there are supply issues I can throw a new, untouched one in priority mail for $25 (cost and shipping)

Todd
_________________________
Brag about how close you got not how far you shot.
Hunt hard, kill clean, waste nothing and offer no apologies.

Top
#2346101 - 08/01/08 05:45 PM Re: Hotel knife... [Re: varmintsinc]
carbon12
Campfire Regular


Registered: 03/30/05
Posts: 351

Offline
varmintsinc,

Hey thanks for the link and the offer. I am traveling for the next two weeks and will check for availability when I return. If NorthCoast is still out of stock, I will check back with you.

Top
Page 1 of 1 1


Moderator:  RickBin, SYSOP 
Hop to:
Visit Our Sponsors
Who's Online
111 registered (222Rem, KDK, MP875, waterbug, Ivan, bcp, 16 invisible) and 163 anonymous users online.
October
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Forum Stats
18935 Members
65 Forums
198044 Topics
2438383 Posts

Max Online: 1366 @ 08/07/07 07:51 PM

Generated in 0.018 seconds in which 0.004 seconds were spent on a total of 14 queries. Zlib compression disabled.




Copyright © 2000-2008 24hourcampfire.com, Inc. All Rights Reserved.