24hourcampfire: E.Arthur Brown 7mm Super Mag.

You are not logged in. [Log In] HOME » Forums » Hunting & Shooting » Single Shots » E.Arthur Brown 7mm Super Mag.

Page 1 of 1

Topic Options

#2479264 - 10/05/08 04:32 PM

E.Arthur Brown 7mm Super Mag.

gunsmoke45
New Member

Registered: 10/05/08
Posts: 5
Loc: USA

Offline

I'm new to the campfire, Have been looking at a 7mm super mag.
10" barrel falling block single shot made by E. Arthur Brown. My
local gun dealer also a good friend picked it up on a trade at a
gun show he was working. I am a 30 year handloader and have several
contender barrels and shoot USPSA matches at present, but know nothing about this gun or caliber. I would appreciate any imfo on
this. I do like playing with old calibers.

thanks in advance
gunsmoke45

Top

#2479300 - 10/05/08 04:54 PM

Re: E.Arthur Brown 7mm Super Mag. [Re: gunsmoke45]

309coug
New Member

Registered: 09/13/08
Posts: 2

Offline

I picked up a contender barrel in 7mm super mag some 10-12 years ago and have no seen another one since. The round is based on the 357 maximum case, necked down to 7mm with the neck only about about 1/8th of an inch long. Looks to be a factory TC barrel. Not a whole lot of info. hope it helps.

Top

#2481359 - 10/06/08 02:59 PM

Re: E.Arthur Brown 7mm Super Mag. [Re: 309coug]

gunsmoke45
New Member

Registered: 10/05/08
Posts: 5
Loc: USA

Offline

Thanks alot thats a place to start, I'll keep searching.
gunsmoke45

Top

#2485032 - 10/08/08 06:04 AM

Re: E.Arthur Brown 7mm Super Mag. [Re: gunsmoke45]

trcuda
Member

Registered: 04/28/05
Posts: 24
Loc: Central WA

Offline

309coug is right, it is a 357 max necked down to 7mm. Redding is the only source (that I know of) for dies and they make 2 versions, 7mm Super Mag and 7mm Super Mag TC. TC bbls have a tighter neck IIRC. I have used 7mm TCU dies with good results as well. Case forming for mine (2 TC bbls) has been fairly easy. I just anneal new 357 max cases and then FL size in either the TCU or SM die. Loading data for the TCU can be used as well but start low as there are lots of variations from source to source.

HTH,
Tim

Edited by trcuda (10/08/08 06:04 AM)

Top

#2489507 - 10/10/08 05:14 AM

Re: E.Arthur Brown 7mm Super Mag. [Re: trcuda]

gunsmoke45
New Member

Registered: 10/05/08
Posts: 5
Loc: USA

Offline

Thanks trcuda, I have also e-mailed E.A.B. on there site for more
imfo on the gun and load. The redding dies are also available on
there site. Now if I can talk a good deal on the gun at the gunshop. LOL Thanks again for your time.

gunsmoke45

Top

#2565594 - 11/11/08 07:38 AM

Re: E.Arthur Brown 7mm Super Mag. [Re: gunsmoke45]

wheelgun51
New Member

Registered: 09/19/08
Posts: 3

Offline

I have had my 7mm sm about 6 years it is real close to 7mm tcu.I started with 7mm tcu data when I first got the barrel.I think it was designed to be a 7mm tcu rimmed.Its a easy hand load but you better anneal the neck area or they will split after a few firings or when you neck down case.

Top