|
Joined: Jul 2004
Posts: 1,664
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2004
Posts: 1,664 |
I picked up a used Montana in .260 Rem a couple months ago, the previous owner had painted the stock grey with some splatter paint in black, silver and white. He did an excellent job but it's not my choice of colour. I'll either repaint it or have it dipped. What's a safe way of stripping the paint without damaging the stock? Fiberglass safe stripper?
|
|
|
|
Joined: Jan 2009
Posts: 760
Campfire Regular
|
Campfire Regular
Joined: Jan 2009
Posts: 760 |
Paint thinner or Lacquer thinner and steel wool. I stripped a paint job off of a McMillian that someone had done. I have never tried a paint stripper, but the lower power stuff like the citrus stuff might work.
|
|
|
|
Joined: Dec 2007
Posts: 25,034
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2007
Posts: 25,034 |
If the paint is solid, I'd just clean it and rattle can right over it.
“Life is life and fun is fun, but it's all so quiet when the goldfish die.”
|
|
|
|
Joined: Oct 2000
Posts: 30,211
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,211 |
I picked up a used Montana in .260 Rem a couple months ago, the previous owner had painted the stock grey with some splatter paint in black, silver and white. He did an excellent job but it's not my choice of colour. I'll either repaint it or have it dipped. What's a safe way of stripping the paint without damaging the stock? Fiberglass safe stripper? According to McMillan, sandpaper and elbow grease. That's what I did with a stock they painted (Butt Ugly Brown) that I didn't like and wanted them to repaint. I wouldn't use chemical stripper on the stock personally...
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Feb 2009
Posts: 2,126
Campfire Regular
|
Campfire Regular
Joined: Feb 2009
Posts: 2,126 |
You can use citristrip. Just don't let it sit there for long. It works well, and doesn't have an offensive odor. When the paint is all off, wipe the stock down with denatured alcohol to remove any residue
|
|
|
|
Joined: Jul 2004
Posts: 1,664
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2004
Posts: 1,664 |
I figured that sanding would be the safest but I don't trust myself not to round off the edges and the finer areas like the barrel channel, bolt cut out, etc.
|
|
|
|
Joined: Dec 2011
Posts: 2,214
Campfire Regular
|
Campfire Regular
Joined: Dec 2011
Posts: 2,214 |
If the paint is solid, I'd just clean it and rattle can right over it. That's what I'd do and prime it first then re-paint.Chemical strippers on fiberglass might not be the best solution.
|
|
|
|
Joined: Jan 2005
Posts: 22,884
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2005
Posts: 22,884 |
Your easiest route would be to post up in the Classifieds here and simply trade your stock with someone who likes the paint job. Win-win for both parties.
|
|
|
735 members (10gaugemag, 02bfishn, 12308300, 11point, 10Glocks, 12344mag, 84 invisible),
2,735
guests, and
1,294
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,187,700
Posts18,399,968
Members73,820
|
Most Online11,491 Jul 7th, 2023
|
|
|
|