|
Joined: Oct 2011
Posts: 511
Campfire Regular
|
Campfire Regular
Joined: Oct 2011
Posts: 511 |
I'm not sure the tip is needed on anything .308 caliber and larger. However, I do shoot the 120 gr TTSX in my 7-08 and the 80 gr TTSX in my 243 Win. Yet, if the rifle liked the tipped version, I would have zero reservations using them.
Honestly, I don't think you could go wrong with either bullet. I really like the performance of the Barnes bullets and usually reach for them first when developing a load, so my opinion is a bit biased. Yet, prior to that, I would look at nothing except a NP.
Goofy aka graybird on other forums
"Make no mistake, it's not revenge he's after ... it's the reckoning"
|
|
|
|
Joined: Dec 2001
Posts: 3,862
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2001
Posts: 3,862 |
My go to loads for 200-gr Nos is H1000, or H4831sc. Nothing not to love about a .308 200gr Partition or NAB IMHO.
Good Shooting!
|
|
|
|
Joined: Nov 2010
Posts: 37,035
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,035 |
H-1000 gets mentioned a lot regarding .300 WM/200 NPT loads. Also 4831.
I've always used 180 NBT/180 NAB's in my Win Mag. I've never loaded a 200 Partition or any other 200 gr. bullet, so this is new territory for me. I look forward to seeing how these bullets shoot. Everything I read points to a classic combo and maybe one of the most accurate .300 WM loads of all.
DF
|
|
|
|
Joined: Nov 2006
Posts: 307
Campfire Member
|
Campfire Member
Joined: Nov 2006
Posts: 307 |
Would be interested to know what powder to use with the 168 TTSX. Just starting to load for my Tikka T3.
|
|
|
|
Joined: Mar 2003
Posts: 17,163
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2003
Posts: 17,163 |
Would be interested to know what powder to use with the 168 TTSX. Just starting to load for my Tikka T3. With that bullet, I have a very good load using H-4831 velocity is 3175 fps. (300 Win. Mag.)
Randy NRA Patriot Life Benefactor
|
|
|
|
Joined: Nov 2010
Posts: 37,035
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,035 |
Would be interested to know what powder to use with the 168 TTSX. Just starting to load for my Tikka T3. I haven't loaded those, but have a lot of faith in Barnes load data. They show 73 gr. IMR-4831 (max) @ 3,140 fps with the 168 (accuracy load). I see IMR/H-4831 oft quoted as among the best accuracy powders for the .300 WM. The "H" version will be more temp stable, "IMR", not so much. DF
|
|
|
|
Joined: Jul 2001
Posts: 60,054
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,054 |
Reloder 19 is often super-accurate with 165-168's in the .300 Winchester, not surprising since its burn-rate is very similar to IMR4831. But it isn't as temp-resistant as H4831.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
593 members (1eyedmule, 10gaugeman, 222Sako, 1minute, 12344mag, 1_deuce, 65 invisible),
2,894
guests, and
1,263
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,706
Posts18,456,843
Members73,909
|
Most Online11,491 Jul 7th, 2023
|
|
|
|