Home Forums Hunting & Shooting Hunting Rifles Building a 6mm/223 aka 6x45mm on the cheap

Print Thread

Hop To

Re: Building a 6mm/223 aka 6x45mm on the cheap barm #14890174 05/18/20
Joined: Dec 2006 Posts: 2,927 Pennsylvania P PennDog Campfire Regular
PennDog Campfire Regular P Joined: Dec 2006 Posts: 2,927 Pennsylvania	I used a Remington 788 in .223 and put a 1:8 Pac-nor #1 contour on it.....not the cheapest route plus I had “lightening” cuts done on the action and bolt, Cerakoted the metal, reshaped the wood stock and had it dipped in a camo pattern. That all said it is a little sweetheart and have taken some turkeys and deer with it using the same basic load as ckat. You’ll enjoy this round Barm! PennDog

GB1

Entire Thread
Title	Posted By	Posted
Building a 6mm/223 aka 6x45mm on the cheap	barm	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	CJC73	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Gacamp	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	micky	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	tikkanut	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	IMR4350	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	efw	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	IMR4350	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	ckat	05/18/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Blu_Cs	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	PennDog	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	kwg020	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	NMpistolero	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	ckat	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	ckat	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	ckat	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	pointer	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	ckat	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Flyer01	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Flyer01	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	NMpistolero	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	ckat	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Filaman	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Filaman	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	IMR4350	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	IMR4350	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	tikkanut	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	tx270	05/19/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Dre	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	efw	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	CJC73	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	CJC73	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	taylorce1	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/20/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	taylorce1	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	HandgunHTR	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Gacamp	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	rickt300	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/21/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	taylorce1	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	rickt300	05/27/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	303savage	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Tyrone	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Tyrone	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Tyrone	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/22/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	irfubar	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Tyrone	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Remington6MM	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Tyrone	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Remington6MM	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Dre	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Remington6MM	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Dre	05/23/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Remington6MM	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Remington6MM	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	geedubya	05/24/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	lapua6547	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	geedubya	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	geedubya	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	geedubya	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	barm	05/27/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Mavrick	06/17/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	lapua6547	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Big Stick	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	Ndbowhunter	05/25/20
Re: Building a 6mm/223 aka 6x45mm on the cheap	CJC73	05/26/20

Moderated by RickBin

Link Copied to Clipboard

AX24

147 members (338Rules, 338reddog, 308xray, 2ndwind, 240NMC, 204guy, 23 invisible), 1,637 guests, and 1,074 robots.

Key: Admin, Global Mod, Mod

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Statistics

Forums81

Topics1,190,717

Posts18,457,110

Members73,909

Most Online11,491
Jul 7th, 2023

Responsive Width:

PHP: 7.3.33 Page Time: 0.073s Queries: 15 (0.004s) Memory: 1.0400 MB (Peak: 1.0950 MB) Data Comp: Zlib Server Time: 2024-04-20 06:25:17 UTC
Valid HTML 5 and Valid CSS