|
Joined: Oct 2013
Posts: 244
Campfire Member
|
OP
Campfire Member
Joined: Oct 2013
Posts: 244 |
|
|
|
|
Joined: Nov 2003
Posts: 4,275
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 4,275 |
Well there are a couple of issues that jump right out. The extractor for the 2 cartridges are completely different. The second thing if those barrel contours aren't the same, it will take a different lever spring for each barrel. Lastly those barrels aren't really meant to just be spun off and changed out. If it stays at or around that price it might be a good project gun.
the most expensive bullet there is isn't worth a plug nickel if it don't go where its supposed to. www.historicshooting.com
|
|
|
|
Joined: Oct 2013
Posts: 244
Campfire Member
|
OP
Campfire Member
Joined: Oct 2013
Posts: 244 |
I did ask about the extractors. The second one is there with all the sights that were on the .50 barrel. I did not, however, ask about the lever spring. Hmmm.
|
|
|
|
Joined: May 2007
Posts: 1,867
Campfire Regular
|
Campfire Regular
Joined: May 2007
Posts: 1,867 |
I wouldn't touch it. Lots of problems there.
|
|
|
|
Joined: Sep 2009
Posts: 46,243
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2009
Posts: 46,243 |
I wouldn't touch it. Lots of problems there. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^THIS^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Trump Won!
|
|
|
|
Joined: Nov 2003
Posts: 4,275
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 4,275 |
If the thing would come in under 1000, then with the shiloh wood , a person could have it barreled and chambered. Would make a decent project gun provided you can find a gunsmith (not a gun parts changer) to do the work. Or even if the original 50-90 barrel wasn't buggered up it could be put to work as a big bore thumper. But anything over a grand for it would be a big risk. Can't imagine just how much fun that thing would be to shoot in 45-110, given the first hand experience I had with a 120 in much the same configuration 40 years ago.
the most expensive bullet there is isn't worth a plug nickel if it don't go where its supposed to. www.historicshooting.com
|
|
|
|
Joined: Dec 2002
Posts: 22,274
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2002
Posts: 22,274 |
A HawkenSharps it's a reserve auction, so I doubt anybody is going to steal it cheap. And shooting the .50-90 with the crescent buttplate could be lots of fun
"...the designer of the .270 Ingwe cartridge!..."
|
|
|
|
Joined: Nov 2003
Posts: 4,275
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 4,275 |
Actually when Shiloh and C Sharps worked out of the same building way back when they offered a "rocky mountain" rifle with that same Hawken type butt plate. Neither the 45-120 nor the 50 140 was anything a person would use to shoot more than a handful of rounds at a time.. Leaving it as the Gemmer conversion and having it rebarreled to 44-77 would be a good use for that thing. Use the other 2 barrels for tomato stakes.
the most expensive bullet there is isn't worth a plug nickel if it don't go where its supposed to. www.historicshooting.com
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
If the thing would come in under 1000, then with the shiloh wood , a person could have it barreled and chambered. Would make a decent project gun provided you can find a gunsmith (not a gun parts changer) to do the work. Or even if the original 50-90 barrel wasn't buggered up it could be put to work as a big bore thumper. But anything over a grand for it would be a big risk. Can't imagine just how much fun that thing would be to shoot in 45-110, given the first hand experience I had with a 120 in much the same configuration 40 years ago. Looks like we were both afflicted with the same psychosis,...mine was a Ballard Pacific in .45-120,...and a brutal thing to shoot for any more than a coupla' shots. I agree it would be a FINE buy at under $1K, and would go the .50-90 route as well. No interest AT ALL in a .45-70 chamber that's been augered out to 120,....and I don't care WHO did the work. There's probably a nice short .45 hunter barrel there, though. .....the remaining residue would make for an interesting Ml project. GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Nov 2003
Posts: 4,275
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 4,275 |
Aw hell Greg , I think just about everybody had to have a go at the 120 in the beginning..:(
the most expensive bullet there is isn't worth a plug nickel if it don't go where its supposed to. www.historicshooting.com
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
I thought that the .450-.577 was supposed to take a full case of powder, too.
GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Jan 2012
Posts: 2,776
Campfire Regular
|
Campfire Regular
Joined: Jan 2012
Posts: 2,776 |
I doubt the reserve is low enough to justify the the thought of buying it and modifying to come up with something of value. It is at $1400 at present and I suspect that the reserve is likely in excess of $3000, maybe $3500. Doesn't compute for me, but of course that is just my opinion.
|
|
|
|
535 members (1beaver_shooter, 10gaugemag, 1Akshooter, 17CalFan, 007FJ, 1337Fungi, 50 invisible),
2,608
guests, and
1,187
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,330
Posts18,468,566
Members73,928
|
Most Online11,491 Jul 7th, 2023
|
|
|
|