|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
After multiple requests for an explanation of how to mount a scope in order to have the lowest possible chance of loss in zero, I took some pics of what I do with a rifle when I get it and how I mount scopes (or anything with screws). To start- a bit of background of why I say what I say. I am a backpack hunter. What I write below is tailored to hunting. Having sid that, I work at a place that fires a lot of ammo. I see over half a million rounds a year on average get fired. 90% of those rounds are tracked. Weapon zeros are checked nearly daily, scopes, mounts, rifles, ammo, etc, are being tested constantly. If a rifle has even a .5 MOA shift in zero we will see it almost immediately. My thoughts are this- scopes are an aiming device. They are a container to hold my reticle so that I can hit targets. I do not care about scratches, dings, or ring marks. I do care that the bullets go where the crosshairs are pointed. My first requirment is that the rifle stays zeroed through use. To do that the mounts, rings, and action screws can not come loose. The #1 reason that we see for loss of zero is failure to mount optics correctly. The #2 reason is the optics themselves failing. This applies to hunting rifles as well. #2 has been discussed several times so I will leave that one alone. Here we go.... Some principles: 1) Things don't shoot "tight", they shoot "loose". 2) Oil and greas helps things move/keeps things from sticking together (this includes oil from fingers) 3) Under torquing screws helps them shoot loose. Over torquing breaks things. 4) Manufacturers apply oil to every metal component to keep it from rusting. Every screw, every base, ever ring has oil on out of the box. 5) Manufactures generally offer info that keeps customer service calls down. When it comes to scope mounting- Ring manufactures generally get calls for rings and mounts "marking" scope tubes. Scope manufactures generally get calls for crimped scope tube causing erector issues. The first is a bit of improper alignment and over torquing, the second is overtightening and fragile scope tubes. 6) The farther apart the rings are, the better support for the scope tube. Ring spacing is a thing. All the parts for those that will ask- Howa 6.5 Grendel SWFA SS 3-9x42mm Seekins Pic Rings Burris XTR Bases Hand tools Acetone or break cleaner Blue Loctite, paint pen, or finger nail polish Napkins and Q-Tips Scale because someone will ask.... Take the rifle apart. Brand new out of the box. That is oil on the screw. Aka- it will come loose Aka- loss of zero. Spray brake cleaner or dip the action screws in acetone. Wipe with a clean rag. Next is the action base holes. Spray/wipe down the action and inside the screw holes to remove oil. This is oil on tbe Q-tip. Aka- loss of zero. Next is to wipe down the bases. Oil here too. Cont....
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
Next the base screws. Oil here. After cleaning, apply thread locker to both screw and screw hole Tighten to whatever you deem appropriate. The small end of the wrench works fine, with the long end for a finish. When tightened... Next the rings... Take apart apart me wipe the caps, and clean screws and screw holes. Cont....
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
Cont.....
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
Degrease base. Thread lock base screw and holes Tighten appropriately and if using Picatinney or Weaver rings push rings forward into the lug. Degrease scope tube, ring cap screws, and apply thread locker to screws and screw holes Cont....
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
Just get the rings screw not quite snug and set eye reload and align the reticle. Whatever way you do not is fine if it works. I mount a lot of scopes and can eyeball the vertical posts with the butt stock very close. Then ensuring that the scope doesn't twist, tighten the ring screws. 18in-lbs is what I generally do. Any less than about 16in-lbs and you sometimes see slippage. The little end of the wrench is good for this. Once that is complete spin the power ring and parralax knob if it has one and spin the turrets up and down. You're just looking for binding or anything weird. If it's good, you're done. . Cont......
|
|
|
|
Joined: Dec 2016
Posts: 1,549
Campfire Regular
|
Campfire Regular
Joined: Dec 2016
Posts: 1,549 |
I’m seeing a common theme here
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
Now I really don't like things to move. So I go a step further and seal around the screws with a paint pen or nail polish. This is another layer to keep oil out, and allows at a glance to see if a screw has loosened. Just a dab around the screw heads will do. Cont......
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
This how I do it, and why. Every single problem we have with optics moving, or screws coming loose is due to not degreasing, not using thread locker, and not torquing correctly. What most miss, is that the rifle is a system- bedding, action screws, bases, rings, and scope all matter if your goal is a static zero.
|
|
|
|
Joined: Dec 2016
Posts: 1,549
Campfire Regular
|
Campfire Regular
Joined: Dec 2016
Posts: 1,549 |
Just to be clear... no lapping, not rubber cement in the rings, no bandaids, etc????
|
|
|
|
Joined: Dec 2009
Posts: 3,395
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2009
Posts: 3,395 |
Just to be clear... no lapping, not rubber cement in the rings, no bandaids, etc???? No. Not unless the action is milled/tapped incorrectly. Even then, scopes with tube walls as thick as SWFA/NF/Bushy LRHS/etc, don't tend to suffer the same issues as most scope do when stressed.
|
|
|
|
Joined: Jan 2007
Posts: 2,252
Campfire Regular
|
Campfire Regular
Joined: Jan 2007
Posts: 2,252 |
|
|
|
|
Joined: Dec 2015
Posts: 8,069
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2015
Posts: 8,069 |
Nice tutorial, thank you.
|
|
|
|
Joined: Dec 2010
Posts: 2,621
Campfire Regular
|
Campfire Regular
Joined: Dec 2010
Posts: 2,621 |
Thanks
I’ll keep this in mind.
|
|
|
|
Joined: Sep 2010
Posts: 31,402
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2010
Posts: 31,402 |
"I can't be canceled, because, I don't give a fuuck!" --- Kid Rock 2022
Holocaust Deniers, the ultimate perverted dipchits: Bristoe, TheRealHawkeye, stophel, Ghostinthemachine, anyone else?
|
|
|
|
Joined: Dec 2007
Posts: 10,258
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2007
Posts: 10,258 |
Should have a permanent sticky. Thanks.
Ed
A person who asks a question is a fool for 5 minutes the person who never asks is a fool forever.
The worst slaves are those that put the chains on themselves.
|
|
|
|
Joined: Feb 2009
Posts: 4,813
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2009
Posts: 4,813 |
Thanks for the thread, Form.
Looks like I'm close with my mounting procedure but not close enough. More cleaning and more Locktite is needed.
Should put this thread into sticky format for later reference.
“Some ideas are so stupid that only intellectuals believe them.” ― G. Orwell
"Why can't men kill big game with the same cartridges women and kids use?" _Eileen Clarke
"Unjust authority confers no obligation of obedience." - Alexander Hamilton
|
|
|
|
Joined: Jun 2001
Posts: 1,991
Campfire Regular
|
Campfire Regular
Joined: Jun 2001
Posts: 1,991 |
This should be a sticky. Great write up. Thanks for posting,
~Molɔ̀ːn Labé Skýla~
“Fear thou not; for I am with thee: be not dismayed; for I am thy God: I will strengthen thee; yea, I will help thee; yea, I will uphold thee with the right hand of my righteousness.” ISAIAH 41:10
|
|
|
|
Joined: Jul 2007
Posts: 24,627
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2007
Posts: 24,627 |
Good stuff. Thanks for taking the time.
WWP53D
|
|
|
|
Joined: Nov 2008
Posts: 1,237
Campfire Regular
|
Campfire Regular
Joined: Nov 2008
Posts: 1,237 |
Thanks for the post....I'll have to admit, I never knew degreasing was so important.
|
|
|
|
Joined: Jun 2009
Posts: 3,188
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2009
Posts: 3,188 |
Thanks, need to stock up on acetone
Stuck in airports, Terrorized Sent to meetings, Hypnotized Over-exposed, Commercialized Handle me with Care... -Traveling Wilbury's
|
|
|
|
379 members (12344mag, 1lesfox, 06hunter59, 160user, 01Foreman400, 1beaver_shooter, 37 invisible),
1,864
guests, and
1,032
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,602
Posts18,454,655
Members73,908
|
Most Online11,491 Jul 7th, 2023
|
|
|
|