Home Forums Hunting & Shooting Custom Rifles & Wildcats RIFLE BLUEPRINTS ONLY!

Perfect set up on the .35 Whelen !

Rem 700 LH Action (.270)
Williams bottom metal, steel
Factory trigger @ 3lbs
24" Pac Nor stainless barrel, action trued by Pac Nor
McMillan Classic, LOP 13.75", bedded by McMillan
Meopta 6X in Talley fixed rings, #4 reticle

This one likes Hornady factory Light Magnum 130 grain stuff. I have a few boxes ratholed.
Bob

Nice lefty! Barrel contour and weight of rifle?

Thanks! Contour is regular sporter. Weight (it ain't a lightweight), loaded with sling, is 9.3 lbs. I never cared for light-weight rifles with skinny barrels.
Bob

Remington 700 SPS SS- blueprinted by Benchmark Barrels
Benchmark barrel - SS, .338-06 A-Square, 1/9.4 twist, Remington magnum contour, 22" length
McMillan Remington Sporter stock - Forest Camo, aluminum pillars, and bed to action
PTG SS bottom metal
Badger Ordnance Bolt Knob
Timney 510 - set at 2#
Badger Ordnance M40 rail
Badger Ordnance rings
Schmidt and Bender Zenith 1.5-6x42 A8
Mil-Spec OD Cerakote (Custom Gun Coatings in KC)
*bipod as picture stand only

Robert Gradous 6BR

Krieger #4- 0"shank22" .678 muzzle od
Manners SL carbon fiber/molded colors
Pierce chrome-moly steel action
Remington Trigger
Modified magbox/follower
Talley rings

6.5lbs

W/Ziess 3.5-15x42 - 7lb-15oz

Test target we shot at completion.

.

Beautifull 6BR rifle!

I am curious about the Robert Gradous work on the magazine to feed and extract the 6BR cartridges.

I tried to do the Mike Bryant mod but got no success on a 30BR rifle.


LRCampos.

Here is another of mine:

Remington 700 SPS - blueprinted by Long Rifles Inc.
Krieger barrel - SS, .30-06 Springfield, 1/10 twist, Remington varmint contour, 23" length
McMillan M40A1/HTG stock - Forest Camo, aluminum pillars, and bed to action
Pinned Long Rifles recoil lug
PTG SS bottom metal
Long Rifles Bolt Knob
Fluted Bolt
Timney 510 - set at 2#
Badger Ordnance 20 MOA rail
Badger Ordnance rings
Zeiss Victory Diavari *T 1.5-6x42 #4
Mil-Spec OD Cerakote

Remington 700 Compact Tactical

8x57

20" heavy Douglas stainless steel barrel
PT&G steel firing pin and aluminum shroud
Callahan milled follower
Bell & Carlson M40
PT&G bottom metal

Eddie Fosnaugh did an excellent job with the graphite black cera-kote and he adjusted the old style trigger.

thats badass

McWhorter 270 Wby Mag Series Gun (#2 of 25 Long Range Predator Series)

�Stiller action, Helically fluted bolt, side bolt release, m-16 mod extractor
�Hart 1:10" SS Matchgrade #5 Fluted barrel 25" + MB + Cap
�McMillan Sporter Edge stock, pillar bedded - Olive w/ Black & White web.
�Sniper Gray Cerakote
�PTG machined alum. bottom metal
�Jewell Trigger @ 1.5 lbs.
�8 lbs 14 oz all up with scope
�Swarovski Z6i 3-18x50 BT with 4Wi reticle
�Shot an average of .224" with 150 gr Berger VLD-Hunting bullets at 3230 fps!

\



NICE STICK DUDE!

Thanks, man! You'll see it in TX!

Eric

Very nice rig. McWhorter sure likes the .270 Weatherby!

Thanks, Okie!

Eric

Walking rifle in .375H&H, Legend Stock, Christianson metalwork, Hill Country Rifles and Kampfeld Custom finishing work.

- Started as a new Winchester 70 Alaskan
- Legend stock in standard fill
- Lee Christianson replaced the factory barrel with a #3 Pac-Nor SS 5groove barrel cut to 23.25, profiling the barrel to fit the stock, did a little work on the trigger and other forms of dark arts.
- Hill Country Rifles did the stock work, installing crossbolts, inletting, pillar bedding, jeweling the bolt, etc. Finished in Cerakote Graphite Black
McMillan painted olive with black speckle.

Unfortunately, I took a long journey down a rockface in Idaho (note: never go down unscouted avalanche chutes); so the barrelled action went right back to Kampfeld Custom who was there in N. Idaho. Karl buffed out the scratches and refinished in Graphite Black. McMillan repainted the stock in its original colors.

Here’s the final product:



With a 2.5x8 Leopold B&C (with the Timney rings champfered slightly to fit the scope), weight is right at 8.5 lbs.

Here is an old one of mine. Not the prettiest, but she is functional and shoots great. It is primarily used for yotes and as a 1000 yard steel gun when my GAP is out of service. The twist rate was a mistake but I have a Bartlein blank in 1/8" twist sitting here for when she finally dies on me.

Remington 700 - blueprinted by Shilen Barrels
Shilen barrel - SS, .260 Remington, 1/9" twist, 5-1/2 contour, 21" length
AICS AT chassis
Badger Ordnance Bolt Knob
Timney 510 - set at 2#
Badger Ordnance 20 MOA rail
Badger Ordnance rings
US Optics MR-10 with GAP reticle
Atlas bipod on Big Dog Steel spigot

Geez, this thread is awfully slow. Here is another of mine to keep things going.

Remington 700 SS - blueprinted by Hill Country Rifles
Benchmark barrel - SS, .300 Wing Mag, 1/10 twist, Benchmark #5 contour with six flutes, 24" length, Benchmark Miller muzzle brake
McMillan Remington Sporter stock - McWoody, aluminum pillars, and bed to action
PTG steel bottom metal
Timney 510 - set at 2#
Badger Ordnance 20 MOA rail w/threads opened to #8-40
Badger Ordnance rings
Zeiss Diavari-V 1.5-6x42 *T with #8 reticle and target elevation/windage turrets
Graphite Black Cerakote

Whitebread nice rig, what does it weigh?

Thanks. 9.5 pounds with a sling and full magazine - no bipod.