Home Forums Hunting & Shooting Savage Collectors Spare Parts Needed Thread

Turns out my 23A Sporter is a 1917 Sporter. I ordered a magazine off Gunbroker. Doesn't fit. Anyone have a mag for a 1917 Sporter and need a 23A mag? Looking to trade. I also have a safety for the 23A to boot.

Looking for two sets of Lyman/Fecker target blocks for a 1919 NRA and a 23D in 22 Hornet. I think they are the same blocks. Have them on order with Steve Earle, but I figure I can always use extras, and he's a bit busy. I want to put a Fecker 10X on the NRA and a Lyman 438 on the Hornet. When Steve comes through, I'll just buy a couple more guns and scopes. Thanks.

also new to the forum and trying to find a useable barrel for a 1907 savage 32ACP

Not really up on the pistols but I think there are 3 major barrel versions. First change was at 3000. Next change at 80,500. After that they were interchangeable though not all machined the same.

Welcome aboard Tinmann.
Barrels pop up on ebay and gunbroker occasionally.
There are at least 4 barrel variations (maybe more) and I would not assume interchangeable. Changes occurred to barrel lug, barrel diameter, cartridge indicator over model variations.
The challenge will be;
1) determine the serial number range of the pistol you have and corresponding barrel specs.
2) find the correct barrel via s.n. range. The problem is barrels were not marked so difficult to tell what you are buying.
A Savage Pistol Book (Bailey Brower) will help you I.D. what you have with specs.
Good luck in the hunt.

will someone tell me how to get a no drill scope base. thanks MOOSE

Watch ebay and gun broker for stith scope mounts, but you will have to get the right scope to go with them. Or send Lightfoot a pm, He makes them and you can use most any modern scope.

Lee

PM sent.

Are a lever bushing and screw available? I have a 1938 EG and for some reason there is lateral play when the screw is completely tightened. The little stud is seated properly as best I can tell but there is more side-to-side play on this lever compared to the others I own. Anyone have an idea? Thanks, Bruce

After posting, I pulled the assembly from a 20's G and the bushing is a bit shorter and corrected the play in the EG. I was surprised to find the bushing from the EG fit in the G with no play as before. I still haven't figured out why but all seems to be well. Still wondering if the bushing and screw are available if someone knows. Thanks

Hello.

I'm looking for a rear sight that would have been on a 1919 1899 250-3000. Let me know if you have one you could part with.

Thanks.

Welcome to the fire, hope some one can fix you up with your sight. I have a 1919 250 and it's a shooter, but no extra parts.

The rear sight is commonly known as the "flat top sporting sight".
Any of these would work. I think the middle one would be correct for your rifle.
Can be found on ebay ~$50 +/-

Excellent, thank you. Now I know what I'm looking for

Wow sights are expensive on ebay. I recently obtained a 1899 stock that was slightly modified for a Lyman 2A 30-1/2 windage tang peep sight, but otherwise is very good shape. I think I'm going to hold out for one of those instead, if I can find one that doesn't cost more than the rifle. I think I know the answer but I'll ask, does anyone have one they'd like to sell?

Thanks.

Need a buttstock for a 99CE. Have trade goods.

I have a Savage 250-3000 deluxe and I’m looking for an old barrel band sling mount for it, anyone have one?

here's an option if no one has one to get rid of;

https://brassstacker.com/Magazine-Tube-Clamp.html

I am new to this site, so I don't know how everything works,I have a complete stith mount,screwes,dovetail ,scope is a weaver 330 clear optic,adj. work fine. I have it listed on GB can see pictures there,if any interest contact me.

Im looking for a buttstock for a pre war R with 3pt checkering. Anyone have a spare??

Joe

Joe, I have a pre-war R set, but iirc it's two point checkering. I'll go look.
Roy