24hourcampfire.com
24hourcampfire.com
-->
Previous Thread
Next Thread
Print Thread
Hop To
Page 3 of 8 1 2 3 4 5 6 7 8
Joined: Apr 2005
Posts: 30,896
J
Campfire 'Bwana
Offline
Campfire 'Bwana
J
Joined: Apr 2005
Posts: 30,896
Originally Posted by glockdoofus
If one is NOT a SAAMI member one IS NOT REQUIRED to adhere to their specifications. The ammo can be loaded with "blow the doors off loads" so that doesnt compute in this conversation.


I know this and that is why Buffalo Bore and Underwood just to name 2.



I got banned on another web site for a debate that happened on this site. That's a first
GB1

Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by jwp475
Originally Posted by glockdoofus
If one is NOT a SAAMI member one IS NOT REQUIRED to adhere to their specifications. The ammo can be loaded with "blow the doors off loads" so that doesnt compute in this conversation.


I know this and that is why Buffalo Bore and Underwood just to name 2.


Again what barrel length was that M29 Smith.


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Apr 2005
Posts: 30,896
J
Campfire 'Bwana
Offline
Campfire 'Bwana
J
Joined: Apr 2005
Posts: 30,896
Originally Posted by glockdoofus
Originally Posted by jwp475


That’s a typo should be 240 grain. Those keys do both letters and numbers and I didn’t proof read.

Again I do not remember which brands did the 1180 and which brands that did 1240. No load that I chronographed in my M29 went below 1180 and none went above 1280. As I remember it was one or the other speed. It was 2008 when I did this


Just buy some recent manufactured 44 mag of manufacturers that are SAAMI members and chronograph them yourself, you should get similar numbers that I got.

I’ve still got a few of the 70s Remington 240 JHP loads that I can chronograph again if needed


What barrel length is that M29? 4, 6, 6.5, 8.375 inch. Maybe a 3 inch?



I have answered this already, when you asked earlier, why do yo7 ask th3 same question over that has already been answered?
I’ll answer it one last time all loads were chronographed in a 6” model 29.



I got banned on another web site for a debate that happened on this site. That's a first
Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by jwp475
Originally Posted by glockdoofus
Originally Posted by jwp475


That’s a typo should be 240 grain. Those keys do both letters and numbers and I didn’t proof read.

Again I do not remember which brands did the 1180 and which brands that did 1240. No load that I chronographed in my M29 went below 1180 and none went above 1280. As I remember it was one or the other speed. It was 2008 when I did this


Just buy some recent manufactured 44 mag of manufacturers that are SAAMI members and chronograph them yourself, you should get similar numbers that I got.

I’ve still got a few of the 70s Remington 240 JHP loads that I can chronograph again if needed


What barrel length is that M29? 4, 6, 6.5, 8.375 inch. Maybe a 3 inch?



I have answered this already, when you asked earlier, why do yo7 ask th3 same question over that has already been answered?
I’ll answer it one last time all loads were chronographed in a 6” model 29.




You just stated the barrel length. Not the gun. Then you menrioned the M29. How did I know the 6 inch wasnt a custom etc.?
Did any other ammo give you velocities that were in the ballpark you play in?


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Apr 2005
Posts: 30,896
J
Campfire 'Bwana
Offline
Campfire 'Bwana
J
Joined: Apr 2005
Posts: 30,896
Originally Posted by glockdoofus
Originally Posted by jwp475
Originally Posted by glockdoofus
Originally Posted by jwp475


That’s a typo should be 240 grain. Those keys do both letters and numbers and I didn’t proof read.

Again I do not remember which brands did the 1180 and which brands that did 1240. No load that I chronographed in my M29 went below 1180 and none went above 1280. As I remember it was one or the other speed. It was 2008 when I did this


Just buy some recent manufactured 44 mag of manufacturers that are SAAMI members and chronograph them yourself, you should get similar numbers that I got.

I’ve still got a few of the 70s Remington 240 JHP loads that I can chronograph again if needed


What barrel length is that M29? 4, 6, 6.5, 8.375 inch. Maybe a 3 inch?



I have answered this already, when you asked earlier, why do yo7 ask th3 same question over that has already been answered?
I’ll answer it one last time all loads were chronographed in a 6” model 29.




You just stated the barrel length. Not the gun. Then you menrioned the M29. How did I know the 6 inch wasnt a custom etc.?
Did any other ammo give you velocities that were in the ballpark you play in?


The newly manufactured Ammo of Winchester, fiochii, Federal, Speer was from 1180 to 1240 FPS, depending on brand in my m29. The early 70s Remington 240 JHP went 1400 FPS.

I know that when I shot IHMSA guys shooting Federal factory Ammo was hotter than my reloads with 22 grains of 2400.



I got banned on another web site for a debate that happened on this site. That's a first
IC B2

Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by jwp475
Originally Posted by glockdoofus
Originally Posted by jwp475
Originally Posted by glockdoofus
Originally Posted by jwp475


That’s a typo should be 240 grain. Those keys do both letters and numbers and I didn’t proof read.

Again I do not remember which brands did the 1180 and which brands that did 1240. No load that I chronographed in my M29 went below 1180 and none went above 1280. As I remember it was one or the other speed. It was 2008 when I did this


Just buy some recent manufactured 44 mag of manufacturers that are SAAMI members and chronograph them yourself, you should get similar numbers that I got.

I’ve still got a few of the 70s Remington 240 JHP loads that I can chronograph again if needed


What barrel length is that M29? 4, 6, 6.5, 8.375 inch. Maybe a 3 inch?



I have answered this already, when you asked earlier, why do yo7 ask th3 same question over that has already been answered?
I’ll answer it one last time all loads were chronographed in a 6” model 29.




You just stated the barrel length. Not the gun. Then you menrioned the M29. How did I know the 6 inch wasnt a custom etc.?
Did any other ammo give you velocities that were in the ballpark you play in?


The newly manufactured Ammo of Winchester, fiochii, Federal, Speer was from 1180 to 1240 FPS, depending on brand in my m29. The early 70s Remington 240 JHP went 1400 FPS.

I know that when I shot IHMSA guys shooting Federal factory Ammo was hotter than my reloads with 22 grains of 2400.


Are those figures you are quoting from the factory ballistics or are they ACTUALLY fired from your gun? If I would have shot ammo that was that weak I sure would have pasted the results somewhere they would have been easy to find.
Its funny that the 1180 figure is from some websites on the 240 gr ammo.


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Apr 2005
Posts: 30,896
J
Campfire 'Bwana
Offline
Campfire 'Bwana
J
Joined: Apr 2005
Posts: 30,896

Once again those velocities were chronographed in my model 29 6” barrel. Jeez

Yes they were posted in 2008. I know they were posted on accurate reloading in the handgun forum you are free to look them up

Last edited by jwp475; 01/19/19.


I got banned on another web site for a debate that happened on this site. That's a first
Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by jwp475

Once again those velocities were chronographed in my model 29 6” barrel. Jeez

Yes they were posted in 2008. I know they were posted on accurate reloading in the handgun forum you are free to look them up


Are you going from memory or are you absolutely postively sure with no doubt about the velocities? There is no way you are quoting factory posted velocities from some of the factories.?


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Aug 2007
Posts: 115,424
Campfire Sage
Offline
Campfire Sage
Joined: Aug 2007
Posts: 115,424
“Declaring declaration.”


Originally Posted by Geno67
Trump being classless,tasteless and clueless as usual.
Originally Posted by Judman
Sorry, trump is a no tax payin pile of shiit.
Originally Posted by KSMITH
My young wife decided to play the field and had moved several dudes into my house
Joined: Apr 2005
Posts: 30,896
J
Campfire 'Bwana
Offline
Campfire 'Bwana
J
Joined: Apr 2005
Posts: 30,896
Originally Posted by glockdoofus
Originally Posted by jwp475

Once again those velocities were chronographed in my model 29 6” barrel. Jeez

Yes they were posted in 2008. I know they were posted on accurate reloading in the handgun forum you are free to look them up


Are you going from memory or are you absolutely postively sure with no doubt about the velocities? There is no way you are quoting factory posted velocities from some of the factories.?



I’m done with your obtuse BS.



I got banned on another web site for a debate that happened on this site. That's a first
IC B3

Joined: Aug 2011
Posts: 6,518
Campfire Tracker
Offline
Campfire Tracker
Joined: Aug 2011
Posts: 6,518
JWP, just ignore this properly named troll............Doofus!


If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.

Doug
Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by jwp475
Originally Posted by glockdoofus
Originally Posted by jwp475

Once again those velocities were chronographed in my model 29 6” barrel. Jeez

Yes they were posted in 2008. I know they were posted on accurate reloading in the handgun forum you are free to look them up


Are you going from memory or are you absolutely postively sure with no doubt about the velocities? There is no way you are quoting factory posted velocities from some of the factories.?



I’m done with your obtuse BS.


Yes i have all weekend all next week. But where is that elusive data?


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by lastround
Properly named........Doofus! Just ignore this troll!


You are right. But still the question wasnt answered. Just politicianed around.


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Mar 2005
Posts: 11,679
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Mar 2005
Posts: 11,679
For crying out loud, stfu doofus! Damn, its like arguing with a 15 year old know it all punk kid.


Every normal man must be tempted, at times, to spit on his hands, hoist the black flag, and begin slitting throats.
Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by MOGC
For crying out loud, stfu doofus! Damn, its like arguing with a 15 year old know it all punk kid.


Thank you for the compliment. While I dont aspire ro be like the little gods on this site there is maybe two and a half things I know.

I am fairly ignorant and have worn the mantle proudly.


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Aug 2007
Posts: 115,424
Campfire Sage
Offline
Campfire Sage
Joined: Aug 2007
Posts: 115,424
Are you declaring a declaration?


Originally Posted by Geno67
Trump being classless,tasteless and clueless as usual.
Originally Posted by Judman
Sorry, trump is a no tax payin pile of shiit.
Originally Posted by KSMITH
My young wife decided to play the field and had moved several dudes into my house
Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
It is a miracle. An absolute miracle.


I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Joined: Jun 2008
Posts: 2,143
Campfire Regular
Offline
Campfire Regular
Joined: Jun 2008
Posts: 2,143


Max Prasac

Semper Fidelis

The Gun Digest Book of Hunting Revolvers:
https://youtu.be/zKJbjjPaNUE

Bovine Bullet Test
https://www.youtube.com/watch?v=mmtZky8T7-k&t=35s

Gun Digest TV's Modern Shooter:
https://www.youtube.com/watch?v=nGo-KMpXPpA&t=7s
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
Offline
Campfire Tracker
Joined: Mar 2018
Posts: 3,445

RoninPhx,

Since you asked about the 429421, I'd stay at or BELOW current loading specs.


Don't ask me about my military service or heroic acts...most of it is untrue.

Pronoun: Yes, SIR !
Joined: Apr 2018
Posts: 1,518
G
Campfire Regular
Offline
Campfire Regular
G
Joined: Apr 2018
Posts: 1,518
Originally Posted by Whitworth1


The only thing this proves is Mag Tech and Fiochi is slow.
What about the Remington?


Last edited by glockdoofus; 01/22/19.

I AM THE GOOD FRIEND OF RENEGADE50.
HE MENTORS ME.
HE PUNISHES ME WHEN I AM WRONG.
HE CALLS ME OUT WHEN I AM LYING.
HE CARES GREATLY ABOUT ME.

Page 3 of 8 1 2 3 4 5 6 7 8

Moderated by  RickBin 

Link Copied to Clipboard
AX24

477 members (10gaugemag, 17CalFan, 16penny, 12savage, 10gaugeman, 10ring1, 55 invisible), 2,918 guests, and 1,161 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,191,276
Posts18,467,558
Members73,927
Most Online11,491
Jul 7th, 2023


 


Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.



Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.083s Queries: 14 (0.003s) Memory: 0.9059 MB (Peak: 1.0618 MB) Data Comp: Zlib Server Time: 2024-04-25 03:54:21 UTC
Valid HTML 5 and Valid CSS