|
Joined: Apr 2013
Posts: 14,038
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2013
Posts: 14,038 |
looks like a douglas barrel to me. and the action is worth that price in my opinion. What make ya think Douglas barrel? Some characteristic? Certain mark style for the caliber mark? When I broke it down I could not find a single mark anywhere on it other than caliber. .308 that was it. i have used about a dozen Douglas barrels on Mauser or 03 springfield builds over the years and the contour, finish just says Douglas to me. don't know why you are worrying about headspace so much , that rifle looks like it was put together by a good hand, but go/nogo guages are the best way to go.
the consolidation of the states into one vast republic, sure to be aggressive abroad and despotic at home, will be the certain precursor of that ruin which has overwhelmed all those that have preceded. Robert E Lee ~Molɔ̀ːn Labé Skýla~
|
|
|
|
Joined: Aug 2010
Posts: 27,797
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2010
Posts: 27,797 |
|
|
|
|
Joined: Aug 2010
Posts: 27,797
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2010
Posts: 27,797 |
Just get go/no go gauges...it'll run you all of $70. If it is too deep you could always punch it out to 30/06. He’s more like Turdy turdy kinda guy
|
|
|
|
Joined: Nov 2005
Posts: 23,059
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,059 |
$450 would be top dollar to me. Everybody's right re: checking headspace. It's a 75-80 year old army rifle which we don't know its provenance, what kind of crazy hot handloads it may have been subjected to in its life, who customized it, and if they knew what they were doing. Looks little fired you say? Could be headspace is excessive and the previous owner got tired of having case separations and after a few mishaps tucked it away- there's just no way of knowing. Whenever buying something like this it's always a good idea to check headspace, and not just with go and no-go gauges, you need a field gauge too. If the bolt barely closes on a no-go gauge it may still be sort of ok to use, but don't expect long case life. The kiss of death is if it closes easily on a no-go and then also closes on a field gauge which indicates way excess headspace. Still ok to buy, if you can at that point get it for a steal of a price, and you have access to a bucket full of M98 bolts that you can mix and match until you find one that fits better.
You do know also to check headspace with the extractor removed? Leaving it in place makes it impossible to feel how the bolt interacts with the gauge, and can easily mislead you.
Trying fresh factory brass in it tells you nothing.
Last edited by gnoahhh; 02/15/19.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Jan 2012
Posts: 45,013
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Jan 2012
Posts: 45,013 |
Just get go/no go gauges...it'll run you all of $70. If it is too deep you could always punch it out to 30/06. He’s more like Turdy turdy kinda guy ??????
|
|
|
|
Joined: Jan 2012
Posts: 45,013
Campfire 'Bwana
|
OP
Campfire 'Bwana
Joined: Jan 2012
Posts: 45,013 |
$450 would be top dollar to me. Everybody's right re: checking headspace. It's a 75-80 year old army rifle which we don't know its provenance, what kind of crazy hot handloads it may have been subjected to in its life, who customized it, and if they knew what they were doing. Looks little fired you say? Could be headspace is excessive and the previous owner got tired of having case separations and after a few mishaps tucked it away- there's just no way of knowing. Whenever buying something like this it's always a good idea to check headspace, and not just with go and no-go gauges, you need a field gauge too. If the bolt barely closes on a no-go gauge it may still be sort of ok to use, but don't expect long case life. The kiss of death is if it closes easily on a no-go and then also closes on a field gauge which indicates way excess headspace. Still ok to buy, if you can at that point get it for a steal of a price, and you have access to a bucket full of M98 bolts that you can mix and match until you find one that fits better.
You do know also to check headspace with the extractor removed? Leaving it in place makes it impossible to feel how the bolt interacts with the gauge, and can easily mislead you.
Trying fresh factory brass in it tells you nothing. Good info Specially about removing the extractor . Thanks.
Last edited by renegade50; 02/15/19.
|
|
|
|
Joined: Feb 2009
Posts: 2,000
Campfire Regular
|
Campfire Regular
Joined: Feb 2009
Posts: 2,000 |
Dayum...It was the 5 Artillery Lugers that got my attention.
He went over yonder way
|
|
|
|
69 members (35, 10Glocks, 14idaho, 6mmbrfan, 280shooter, 2500HD, 7 invisible),
1,556
guests, and
700
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,599
Posts18,454,536
Members73,908
|
Most Online11,491 Jul 7th, 2023
|
|
|
|