Previous Thread
Next Thread
Print Thread
Hop To
Page 1 of 2 1 2
#14022586 - 08/03/19 Bullets for the 375  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Picked up a fairly well used 375 Big Bore for the canoe. When it shot 200 grain Factory bullets 2037ft/sec) into 5" groups I wondered. An old box of 250 grain discontinued power point factory loads (1770ft/sec) went into about 2.75 inches and with open sights I find that satisfactory. 255 grain Barnes's and Rl 7 (1850ft/sec) can get into just over 3" groups. However 235 Speer Bullets chucked into the lathe for Flat Pointing to 229 grains and given a cannelure and enough RL7 to get to 2025 ft/sec are giving me the best groups yet. The bullet also out penetrates everything else tried. It expands but I don't know how far out. Wish the 220 Hornady's where still being made.

Video Here

https://www.youtube.com/watch?v=oKNY261k8yQ&feature=youtu.be

300 BP

#14023217 - 08/03/19 Re: Bullets for the 375 [Re: North61]  
Joined: Jun 2003
Posts: 35,855
jorgeI Offline
Campfire Oracle
jorgeI  Offline
Campfire Oracle

Joined: Jun 2003
Posts: 35,855
Orange Park, Florida
North! glad to see you're posting videos again and great minds think alike! I just bought a 375 myself and have been experimenting with lead bullets as well using 5744 powder. Had pretty good luck with the 200gr Sierras and the 250gr Barnes using RL-7 powder, but the factory 200 gr Power Points were awful in the accuracy department. Keep us posted!


Teddy Roosevelt, John Wayne, Winston Churchill paid to hunt....
#14023227 - 08/03/19 Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2017
Posts: 80
frank500 Offline
Member
frank500  Offline
Member

Joined: Dec 2017
Posts: 80
Wyoming
Thank you North 61. Vollmer bullets makes an assortment of 375 and 38/55 bullets. Their 220 grain performs closely to the Hornady 220. Sure wish Hornady would make a run of them.

#14023794 - 08/03/19 Re: Bullets for the 375 [Re: North61]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Too hard to get semi-custom bullets up here in Canada. I can get Hawks. Might try some 200 grain Hawks next.

#14024140 - 08/04/19 Re: Bullets for the 375 [Re: North61]  
Joined: May 2010
Posts: 176
markak338fed Offline
Member
markak338fed  Offline
Member

Joined: May 2010
Posts: 176
alaska
North61, I used the 375 Winchester for many years, built a 24in barrel mod94, took moose, black/brown bear and many deer. The 200gr factory were not accurate, 220 Hornady's were a little better, the 250 power point was accurate and performed perfectly. I believe the barrel twist was the reason. When Winchester dropped the 250gr I switched to the 356 as couldn't find a suitable replacement. Have heard a rumor the Kodiak will make a 250 flat point if their is any interest, believe that would be perfect. Ken Waters I believe tried the 235gr Speer but found that it was to stout to expand at 375 velocity.

Alpha

#14024419 - 08/04/19 Re: Bullets for the 375 [Re: markak338fed]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
I think expansion might be the thorn in the modified 235 grain Speer's side. Flat Nosed the b.c. must go down and I'd bet past 75 yards or so the speed will be so low that expansion would be marginal. The Barnes Original is no great shakes at expansion either. The Winchester 250 grain Power Point seemed to be the best bullet by far but I have only 1 left! I wonder why the big loading companies always discontinue the heavier bullet choice and keep the lightest?


Maybe I'll order up some 200 and 250 grain Hawk bullets and give them a go.

#14025014 - 08/04/19 Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2012
Posts: 157
JFE Offline
Member
JFE  Offline
Member

Joined: Dec 2012
Posts: 157
Victoria, Australia
The 375Win in the top eject 94's is a sweet little combination that carries and points well. I like it and regard the cartridge as a 45-70 lite. Jacketed bullets over 200gr are problem but this caliber is really suited to cast bullets.

The fast twist (1 in 12"), deep rifling (in the Winchesters) and straight wall case point to heavy cast bullet use. The cartridge does have a large throat, but long heavy cast bullets work well.

One of the better mould designs was by Ranch Dog who studied the throat then designed a mould to suit. Moulds for that design are now available from NOE, including a HP option.

There are several off the shelf mould options that work well, though the crimp groove better suits use in a 38/55. A Lee FCD is useful tool to have as it enables you to use a different crimp location. Lyman, RCBS, Redding/Saeco have mould designs available. I have used most of those but the mould I use most is one by CBE in Australia - it's designated 376-300 GC. It's a FN 300gr pill that was specially designed for the 375 Win. My loads using Rel-7 develop 1850fps and accuracy is very good. With cast you can tailor the alloy to suit your game. The addition of a HP can provide Nosler Partition type performance. CBE also have a few other styles now, including one with a wider meplat. So, there are plenty of alternatives as long as you cast your own.

#14025082 - 08/04/19 Re: Bullets for the 375 [Re: JFE]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Thanks JFE: I went in and ordered the 300 grain CBE mold from Australia. I got the single mold with top punch. Never Cast before so I am going into unknown territory. I think the weight makes use of the fast twist of the Winchester and I hope it works out!

#14026626 - 08/04/19 Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2012
Posts: 157
JFE Offline
Member
JFE  Offline
Member

Joined: Dec 2012
Posts: 157
Victoria, Australia
Welcome to the brave new world of bullet casting. If you haven't already done so you should check out the castboolits forum - there is wealth of info on tap there. Their reference section is well worth a visit too.

The LASC site is another good site for reference data and interesting articles.

http://www.castboolits.gunloads.com/

http://www.lasc.us/CastBulletNotes.htm

#14029731 - 08/06/19 Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2016
Posts: 973
DeanAnderson Offline
Campfire Regular
DeanAnderson  Offline
Campfire Regular

Joined: Dec 2016
Posts: 973
NE Illinois
I picked up a Winchester 94 XTR in 375 Win and posted here about it after restocking it with a new OEM brown Win-Tuf stock set. I have 60 rounds loaded with the Hornady 220gr., 80 rounds loaded with the Sierra 200gr. and 200 Sierra Pro Hunter 200gr. bullets when I need to load some more. For me, the rifle will be occasionally used for Whitetail here in the upper midwest at Tamarack swamp distances. I used to be heavily into casting projectiles for handgun and muzzleloader, but have been out of that game for some time now. For the distances I'll be shooting, these bullets will serve me quite well. Always enjoy, and learn from, your topics and videos North61, thanks for posting (still have my dad's first year 71 deluxe, it was neat reading about your testing of the old 348 Speer bullets I sent you).


It isn't what happens to you that defines you, it's what you DO about what happens to you that defines you!

NRA life member

Illinois State Rifle Association member
Bravo

#14029835 - 08/06/19 Re: Bullets for the 375 [Re: DeanAnderson]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Thanks again for that. It's always great seeing how the bullets of yester-year worked. The old bullet factories put more emphasis on low speed expansion than the "premium" bullets of today. Both ideas have their place.

#14042210 - 08/11/19 Re: Bullets for the 375 [Re: North61]  
Joined: Mar 2015
Posts: 18
bill73 Offline
Member
bill73  Offline
Member

Joined: Mar 2015
Posts: 18
North61,
Thanks for sharing your experiences,would you mind sharing some details on the lathe that you are using to modify the bullets please?I shoot levers a fair amount & some of the calibers that I shoot,FN bullets are not available.

#14044478 - 08/12/19 Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2017
Posts: 80
frank500 Offline
Member
frank500  Offline
Member

Joined: Dec 2017
Posts: 80
Wyoming
Bill
North 61 shows his mini lathe on his YouTube channel. Good stuff

#14045058 - 08/12/19 Re: Bullets for the 375 [Re: frank500]  
Joined: Mar 2015
Posts: 18
bill73 Offline
Member
bill73  Offline
Member

Joined: Mar 2015
Posts: 18
Thanks,I looked it up,it's home made & looks like it works real well.

#14045593 - 08/12/19 Re: Bullets for the 375 [Re: bill73]  
Joined: May 2011
Posts: 36,579
Fireball2 Offline
Campfire Oracle
Fireball2  Offline
Campfire Oracle

Joined: May 2011
Posts: 36,579
Oregon
I had excellent luck with the factory 200's in two Savage lever guns, both one-holers, literally. When factory ammo hit $90 a box I sold it all and now load 200 grain Sierras with the same good results. Love it when a plan comes together.


_______________________________________________________
Molon labe bitches

The world has gone completely crazy, starting with most of you!

Intolerance is about to become very popular. I'm ahead of the curve.

#14060806 - 08/19/19 Re: Bullets for the 375 [Re: North61]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Sorry folks was on a self guided sheep hunt up here. Man what an experience, but out of forum contact. The Lathe I use is a Taig mini-Lathe, sold up here by Lee Valley and used mostly by mini model makers. I just took the 235 Speers down to 225 grains and will retest..the bullet on media. They might open up mpre if more lead is exposed but the javket is thick. I was thinking on the trip that the 375 with the modified 235 Speers would b a dandy grizzly defense gun. The Speers would penetrate well and 6 in the magazine in a very handy and light package. My 300 grn Cast mold came from australia. I guess I need to qcuire all the rest of the stuff for casting now. Found some 200 Sierras and will test these when they arrive as well.

#14063394 - 08/20/19 Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2004
Posts: 4,295
RiverRider Offline
Campfire Guide
RiverRider  Offline
Campfire Guide

Joined: Dec 2004
Posts: 4,295
North Texas
I "solved" my .375 bullet problem by removing the lead tip from 235-grain Speers and cleaning them up with a file. I intended to test it on a hog or two, but never have had the chance so I don't know whether they'll open up at 2250. I still intend to find out.


Life Member NRA, Texas State Rifle Association, Second Amendment Foundation, & GOA

“Evil preaches tolerance until it is dominant, then it tries to silence good.”

― Charles J. Chaput
#14065988 - Yesterday at 06:34 AM Re: Bullets for the 375 [Re: North61]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Got a one hole group at 50 yards with the 230 grain versions (Flattened 235 Speer) which basically have me removing a skiff of copper. With the 225 versions I had a harder time getting to a consistent weight and they went into 2" at 50 yards. Range too busy to do expansion testing but will get that done shortly.

#14066363 - Yesterday at 09:21 AM Re: Bullets for the 375 [Re: North61]  
Joined: Dec 2004
Posts: 4,295
RiverRider Offline
Campfire Guide
RiverRider  Offline
Campfire Guide

Joined: Dec 2004
Posts: 4,295
North Texas
Great results, there. I wish I could see my sights better...I've had acceptable accuracy with them but nothing like that.
cry

I would love to see how your expansion tests go, please DO post them!


Life Member NRA, Texas State Rifle Association, Second Amendment Foundation, & GOA

“Evil preaches tolerance until it is dominant, then it tries to silence good.”

― Charles J. Chaput
#14067418 - Yesterday at 05:15 PM Re: Bullets for the 375 [Re: RiverRider]  
Joined: Mar 2005
Posts: 1,380
North61 Online content
Campfire Regular
North61  Online Content
Campfire Regular

Joined: Mar 2005
Posts: 1,380
Yukon, Canada
Will do!
The one hole group is likely a fluke. 3 shot groups are not statistically telling unless repeatable. However, I also got 2" at 75yards with the 230 shortened Speers and Rl 7. So far seems like the best load.

Last edited by North61; Yesterday at 05:19 PM.
Page 1 of 2 1 2

Moderated by  RickBin, SYSOP 

AIH 160
Who's Online Now
125 registered members (19352012, 2ndwind, 2legit2quit, 257_X_50, 1911a1, 1_deuce, 13 invisible), 582 guests, and 589 spiders.
Key: Admin, Global Mod, Mod









Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2018 24hourcampfire.com, Inc. All Rights Reserved.
 
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.124s Queries: 15 (0.006s) Memory: 1.0649 MB (Peak: 1.3427 MB) Zlib enabled. Server Time: 2019-08-23 06:40:29 UTC