Home Forums Hunting & Shooting Rimfires Tikka T1 MTR

Just bought one Sunday. My plans are to do some NRL 22 matches. With that in mind I ordered a SWFA 10x and a area419 30moa rail. Still waiting on scope and base so I mounted a Meopta 3.5-10 in cheap dovetail rings to start wringing it out.

Trigger adjusted down nicely to 1.5 lbs. Have put a little over 200 rds thru it so far with no issues at all. No misfires or failure to feed or eject.

Have used several types of ammo. It shoots all the cheap bulk stuff about the same around 1.5" to 2" at 100 in 10shot groups. The remington gold bullet stuff is trash about 3". Blazer is around 1.25" CCI Standard a little less than that. It really likes the SK Standard Two 10 shot groups at less than a 1". I wieghed out a bunch of the SK standard to get 10 that weighed the same and shot them into a .65" group. I think this thing is going be a keeper.

I should have bought that instead of my 17 457.

Im happy with this one so far.

Try some Aguila Super Extra standard velocity.
Shoots 1" or less in my Green Mountain barreled 10-22.
Outstanding practice ammo.

The ones I’ve seen all average sub .5” at 50 yards for 3x10 round groups out of the box.


Mine-

It shoots very well. I sorted a brick of the SK Standard by weight and went to the range to get my Dope out to 200yds for the match this weekend. 25yds and 50yds are one ragged hole. 75 and 100 around 1/2" Starts opening up a little at 125,150,175 and 200. But you can put ten shot into a hedge ball at 200 yds no issue once you get the windage. Takes 8.0 mills from a 25yd zero to get to 200. Great shooting little gun. Someday I will splurge on the high dollar stuff but the SK Standard shoots well for the money

SWFA ended up sending me a 12x instead of a 10x went ahead a mounted it up. That MilQuad reticle makes it cheating on this gun.