Home Forums Hunting & Shooting Long Range Hunting Scope Rings

Figured I would ask here..
Just picked up a Browning XBolt Hells Canyon 300 win mag.
I have a Nikon Monarch 5 3x15 50mm scope I would like to put on it.
Just looking for the best bang for your buck scope rings.. I am all in on archery gear, but I do not pay much attention to the gun/scope stuff..so any help would be appreciated. I do not really have a price range as I am hoping this a once and done thing.

Thanks!

https://www.browning.com/products/s...integrated-scope-mount-system-matte.html

I would look at these. Be careful to select the correct height and size for your scope (Duh, but I thought, I mention it.)

I put Burris XTR Signature rings on my Hells Canyon McMillan rifle. Assuming your rifle came with a rail? Buy once and never look back. Probably lows will do the trick. Lightweight too.

It comes with inserts and you can purchase an insert kit for infintismal adjustments.

https://www.burrisoptics.com/mounting-systems/rings/xtr-signature-rings

Street price is less

Thanks guys!

Buy Talley bases and rings. I won’t have anything else on my bolt guns.

I have an 1187 with a cantilever barrel. I have a Nikon Monarch UCC 1.5-6 X 42 mounted on it. I used Warne Maximum Steel Rings. They are the Low ones. You want to try and get the scope to be as low as possible. I would think if the Lows cleared the mount with a 42 it would be fine with the 32. If the scope you have is the Prostaff 2-7x32 than yes it is a good scope for the money and will stand up to the recoil of a slug gun. Hope this helps, Michael