Home Forums Hunting & Shooting Savage Collectors TSX load data

Hi, I finally broke down and bought a box of 130 grain Barnes TSX bullets for my 300 Savage. Barnes's reloading manual doesn't list the 300 Savage,so I thought I'd asked here if somebody has a favorite powder/load. I know Steelhead uses it but I never saved the load he listed. Thanks.

Mike

I asked Barnes last week about load data for the TTSX/TSX for the 300 Savage. Below is their response.


RE: 300 Savage Load data for 130gr TSX and TTSX
Thu, Nov 14, 2019 2:29 pm
Farr, Ryan (RyanFbarnesbullets.com)
To:you Details
I have attached load data for the X bullet, you can use that data with the TSX/TTSX bullets just fine.


Thank You

Ryan Farr | Tech Support/Consumer Services Lead
Barnes Bullets, LLC

Barnes Bullets disclaims all possible liability for damages including actual, incidental and consequential, resulting from usage of the information or advice contained in this message.
Use the data and advice at your own risk, and with extreme caution.
IMPORTANT NOTE: Always begin loading from the minimum "START” charge and carefully develop loads by increasing in small increments of 2% towards the Maximum load.


38 North Frontage Road, PO Box 620, Mona, UT 84645
Phone 435-856-1000 | Fax 435-856-1040

*** THESE ARE HOT - COMPRESSED LOADS ***

Steelhead’s Favourite 300 Savage Barnes Load:

130 grain Barnes TSX bullet

44.5 grs of H4895 in a bolt gun

42.5 grs of H4895 in a 99 rifle

OAL - 2.565”

Thank you both for the information it will get me started.

Mike

Can you list the loads that Barnes recommended?

The aren't compressed.

Steelhead's back.