24hourcampfire.com
24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
Page 1 of 2 1 2
#14334009 12/03/19
Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
CPM S45VN is looking like it is going to be a winner! Looks like 63 HRC is easy to obtain and the sweet spot looks to be 64.


Eat Fish, Wear Grundens, Drink Alaskan.
BP-B2

Joined: Mar 2017
Posts: 4,225
L
Campfire Tracker
Offline
Campfire Tracker
L
Joined: Mar 2017
Posts: 4,225
MCH, who is currently building with it?

Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
I am not sure as far as a list would go. The one I know for sure is, is Triplebhandmade.

I would guess that at the very least these guys will if not already.

Shannon Steel Labs

KKnives_Switzerland

Marauder Knife n Tool


Eat Fish, Wear Grundens, Drink Alaskan.
Joined: Dec 2004
Posts: 5,101
M
Campfire Tracker
Online Content
Campfire Tracker
M
Joined: Dec 2004
Posts: 5,101
So, I am guessing here but is S45VN just S35VN with an extra 1.0% Niobium?????

ie: a tweaked S30V

Who is making this steel????

Last edited by michiganroadkill; 12/04/19.

"The significant problems we face cannot be solved at the same level of thinking we were at when we created them."
Albert Einstein

At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
Joined: Feb 2001
Posts: 5,213
Campfire Tracker
Offline
Campfire Tracker
Joined: Feb 2001
Posts: 5,213
CPM stand for Crucible Powder Metal so...?


The difference between genius and stupidity is that genius has its limits. Albert Einstein
IC B2

Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
Originally Posted by Boise
CPM stand for Crucible Powder Metal so...?


smile smile smile smile

https://knifesteelnerds.com/wp-content/uploads/2019/10/dsS45VN-rev-2.pdf


Eat Fish, Wear Grundens, Drink Alaskan.
Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
Originally Posted by michiganroadkill
So, I am guessing here but is S45VN just S35VN with an extra 1.0% Niobium?????

ie: a tweaked S30V

Who is making this steel????


Tim not sure where to start with this. I guess I could start with saying, with that mindset we would all be carrying Knives in ATS34 or even farther back 410, 420, 440!

Reality is that rarely is their a major jump in chemistry when advancing steels. But a lot of little advancements add up over time. I get that you are content with working with what you are set up for. There is nothing wrong with that.

I personally like to match up steels with geometry and heat treat that complement each other in the intended use. I would never make a hunting or filet knife in a steel like 3V or M4. Just not what those steels shine at. Both great steels. As I am not going to have a fighting knife made of Rex 121 or CPM S125V! Again not what those steels shine at.

I get that making knives with the newer super steels cost a boatload to make. I get that the majority of makers are unwilling to take on this task. It is not easy selling $700 plus plain Jane hunting knives. As I have said before I am very grateful for those that are willing and able to work with the newer super steels. As I am grateful for the steel companies willing to develop these steels.

Use what works for you! If you and your customers are happy with your product that is all that matters. Some of us are knife loonies and enjoy cuts above.

Last edited by MontanaCreekHunter; 12/04/19.

Eat Fish, Wear Grundens, Drink Alaskan.
Joined: Dec 2004
Posts: 5,101
M
Campfire Tracker
Online Content
Campfire Tracker
M
Joined: Dec 2004
Posts: 5,101
So asking that question puts me into some negative mind set???????

At first blush, I could not find CPM S45VN on Crucibles web site, hence the question.
I have now found that info and also watched the video you linked up for us.

Below is Crucuble's opening comment on that steel.

"DATA SHEETCRUCIBLECPM S45VN is a martensitic stainless steel designed to offer improved corrosion and wear resistance over CPM S35VN"

HMMMM

I will never use ATS34 (Hitachi) and left 440C a couple decades ago.

Although I appreciate the constant upgrade from technology, I do not have to have this weeks newest version of the .......
And I do appreciate those who constantly are designing, testing and tweaking the newest.........
Looking at the relevant differences puts things in perspective for me.

"It is not easy selling $700 plus plain Jane hunting knives."
----Correct, and I have no interest in that arena.

I want to make knives at a moderate price, of good quality and good R.O.I for the buyer/user.

Those who have to flirt with the leading edge-----I salute you and continue to hear about your findings.
Just don't get too carried away with the golden egg syndrome.

I think I will stop making posts other than what I am doing and let those who like that so respond.

I may from time to time ask a simple question though.

Keep the new info coming.

Last edited by michiganroadkill; 12/04/19.

"The significant problems we face cannot be solved at the same level of thinking we were at when we created them."
Albert Einstein

At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
Originally Posted by michiganroadkill
So asking that question puts me into some negative mind set???????

At first blush, I could not find CPM S45VN on Crucibles web site, hence the question.
I have now found that info and also watched the video you linked up for us.

Below is Crucuble's opening comment on that steel.

"DATA SHEETCRUCIBLECPM S45VN is a martensitic stainless steel designed to offer improved corrosion and wear resistance over CPM S35VN"

HMMMM

I will never use ATS34 (Hitachi) and left 440C a couple decades ago.

Although I appreciate the constant upgrade from technology, I do not have to have this weeks newest version of the .......
And I do appreciate those who constantly are designing, testing and tweaking the newest.........
Looking at the relevant differences puts things in perspective for me.

"It is not easy selling $700 plus plain Jane hunting knives."
----Correct, and I have no interest in that arena.

I want to make knives at a moderate price, of good quality and good R.O.I for the buyer/user.

Those who have to flirt with the leading edge-----I salute you and continue to hear about your findings.
Just don't get too carried away with the golden egg syndrome.

I think I will stop making posts other than what I am doing and let those who like that so respond.

I may from time to time ask a simple question though.


Tim not everything is about you! Nowhere in my post did I say what you were interested or not interested in. I posted a topic on a steel plain and simple! If you can't discuss topics in and around knives then maybe it is best you don't post. I know it isn't just me, as I remember when Rick was posting here a lot you were complaining to me about that. You are way too sensitive and insecure.


Eat Fish, Wear Grundens, Drink Alaskan.
Joined: Dec 2004
Posts: 5,101
M
Campfire Tracker
Online Content
Campfire Tracker
M
Joined: Dec 2004
Posts: 5,101
Well, I apologize to everybody here. I sure as heck do not remember ever saying anything about anyone too much to anyone

Heck I like and respect you and Rick both...and many others.

Not trying to imply anything is about me. I maintain a pretty low profile in life.
I have never been told I was too sensitive and insecure.
I was however trying to speak up on my experience/opinions
and ask questions to clarify others.

I enjoy this site and hope that I have never degraded it for anyone else and I have learned a few things here.

FWIW, I was impressed with the factory ZDP189 blade when properly sharpened as shown in that link above.
Guess it is all about the carbides.

Life is good.

Grind on and thanks for the interactions to all.

Last edited by michiganroadkill; 12/04/19.

"The significant problems we face cannot be solved at the same level of thinking we were at when we created them."
Albert Einstein

At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
IC B3

Joined: Feb 2011
Posts: 5,856
U
Campfire Tracker
Offline
Campfire Tracker
U
Joined: Feb 2011
Posts: 5,856
MCH, you need to learn how to play well with others. MRK asked a question and you responded that he's living in the past and using inappropriate steels in his knives. You always come on here with a superior attitude, which isn't needed.

Joined: Dec 2013
Posts: 23,639
J
Campfire Ranger
Offline
Campfire Ranger
J
Joined: Dec 2013
Posts: 23,639
What the [bleep] was that? Somebody off their meds?



Joined: Dec 2008
Posts: 21,125
J
Campfire Ranger
Offline
Campfire Ranger
J
Joined: Dec 2008
Posts: 21,125
Originally Posted by michiganroadkill
Well, I apologize to everybody here. I sure as heck do not remember ever saying anything about anyone too much to anyone

Heck I like and respect you and Rick both...and many others.

Not trying to imply anything is about me. I maintain a pretty low profile in life.
I have never been told I was too sensitive and insecure.
I was however trying to speak up on my experience/opinions
and ask questions to clarify others.

I enjoy this site and hope that I have never degraded it for anyone else and I have learned a few things here.

FWIW, I was impressed with the factory ZDP189 blade when properly sharpened as shown in that link above.
Guess it is all about the carbides.

Life is good.

Grind on and thanks for the interactions to all.



Tim, can't wait to get my loveless pard!!....


Ping pong balls for the win.
Once you've wrestled everything else in life is easy. Dan Gable
I keep my circle small, I’d rather have 4 quarters than 100 pennies.

Ain’t easy havin pals.
Joined: Dec 2013
Posts: 23,639
J
Campfire Ranger
Offline
Campfire Ranger
J
Joined: Dec 2013
Posts: 23,639
Does every thread in every forum have to go down in flames just to feed someones ego? Used to be able to at least glean some useful info from the garbage but anymore it's like looking for a needle in a haystack. Nothing more than a place for folks to feed their insecurities.



Joined: Dec 2008
Posts: 21,125
J
Campfire Ranger
Offline
Campfire Ranger
J
Joined: Dec 2008
Posts: 21,125
I'm good until someone talks shiit to me jack!!!😂😂


Ping pong balls for the win.
Once you've wrestled everything else in life is easy. Dan Gable
I keep my circle small, I’d rather have 4 quarters than 100 pennies.

Ain’t easy havin pals.
Joined: Jan 2012
Posts: 1,004
P
Campfire Regular
Offline
Campfire Regular
P
Joined: Jan 2012
Posts: 1,004
Pardon my ignorance, how will this compare to M390?


How do you know a Trump hater? They'll tell you.
Joined: Dec 2004
Posts: 5,101
M
Campfire Tracker
Online Content
Campfire Tracker
M
Joined: Dec 2004
Posts: 5,101

If you have not taken the time to view the link provided by MCH, it is enlightening on sharpening and some steel comparisons.
The things I most grabbed on to where:
----There are some new steels that are very high end, ( CPM S45VN+++) but also some that have been around a while that hang in there. M4 got mentioned a couple times
as an also ran. I am liking that steel myself for now.
----How well the cheap Work Sharp actually performed when you get the "hang" of it.
----That a shallower edge angle and polished edge appears to hold an edge longer than a little steeper and 600 grit toothy finish
----How much the production blade (ZDP 189 steel if I remember correctly) of unknown Rc with a resharpening could go almost off the charts.

It will take a half hour or so but this is it from above.......

https://knifesteelnerds.com/wp-content/uploads/2019/10/dsS45VN-rev-2.pdf

Also, thanks to Boise and MCH for patterns I used in the past that came from their input.

Cut on.


"The significant problems we face cannot be solved at the same level of thinking we were at when we created them."
Albert Einstein

At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
Originally Posted by UPhiker
MCH, you need to learn how to play well with others. MRK asked a question and you responded that he's living in the past and using inappropriate steels in his knives. You always come on here with a superior attitude, which isn't needed.


Oh I am sorry did you have anything to actually say about the steel in discussion? Or just crying because you have nothing of value to say? I could careless if you like me or not. I am not here to pad peoples feelings. But by all means show me where in my post I am wrong. I'll wait...........


Your reading comprehension isn't very good either! I never said anything about the steels he is using. I said and I will say it again really slow for you! With that mindset we would all still be carrying knives made from ATS34 and 410, 420, 440!

Again please show me where I am wrong in my post!

Last edited by MontanaCreekHunter; 12/05/19.

Eat Fish, Wear Grundens, Drink Alaskan.
Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
Back to the actual topic. I see production companies doing runs in it soon. Which is a great thing for the consumer.


Eat Fish, Wear Grundens, Drink Alaskan.
Joined: Jun 2008
Posts: 13,354
M
Campfire Outfitter
OP Offline
Campfire Outfitter
M
Joined: Jun 2008
Posts: 13,354
Originally Posted by peeshooter
Pardon my ignorance, how will this compare to M390?


I think M390 a better steel than S45VN. But the steel is too new to really know yet. But it also comes down to what you are looking to do with the knife.


Eat Fish, Wear Grundens, Drink Alaskan.
Page 1 of 2 1 2

Moderated by  RickBin 

Link Copied to Clipboard
YB23

Who's Online Now
466 members (1Longbow, 160user, 300jimmy, 10ring1, 1lesfox, 257 mag, 46 invisible), 2,058 guests, and 978 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,187,595
Posts18,398,143
Members73,815
Most Online11,491
Jul 7th, 2023


 







Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.104s Queries: 15 (0.003s) Memory: 0.9009 MB (Peak: 1.0567 MB) Data Comp: Zlib Server Time: 2024-03-28 12:03:30 UTC
Valid HTML 5 and Valid CSS