Home Forums Hunting & Shooting Custom Rifles & Wildcats Win mod70 magnum dupe?

What barrel mfrs will dupe a win mid 70 factory contour? 300wm

Stainless. Cut rifling.

Don’t know how similar to a #2, but I think it’s close.

So...stainless, skinny(ish) 30 cal.

Rock Creek will

Might call and ask Brux but I don’t think they will

I wouldn’t call Krieger. Great barrels but not skinny.

Depending on the contour measurements maybe Bartlein could be close enough. Bartlein 2B would be the closest they would make (or a #0).

I think pac-nor will...when they're back up and running.

For sure a bunch of barrel makers will do it, but they are button rifled.

I have a stainless PacNor M70 sporter dupe in 7mm if that's of interest.

Not chambered or threaded.

Thanks for the offer. I am staying with 300wm on this rifle.

Check with Hart Rifle Barrels. They will hook you up. I have had 4 or 5 of there barrels, and all have shot very well.

Stainless cut sure narrows the possible options.
I would check with rock. They will dupe it for you (for a fee) if you have a takeoff to send them. This is why I’m looking for a ks takeoff ...

I don't remember if it was cut rifling, but Lilja made a duplicate barrel for a little Kimber 84M. It was so exact, I did not have to change anything in the stock, My smith just rechambered/fit it and I got after it! It was a 3 groove, fast twist ( 8") .224 TTH ( .22/6mm Remington. If it was NOT cut rifled, I don't know how it could get any more accurate! Excellent , excellent!

This doesn’t read like I meant. Handwerk is right, Pac Nor and many other button rifle barrel makers will make just as good a barrel as a cut rifled barrel.

Limiting your choice to only Rock wouldn’t be my preferred!

I wouldn’t care these days, button or cut or SS vs CM.. they all shoot darned good and a smith can always turn your SS blank down to preferred contour.

Douglas has done several for me...