You gonna yell WEAVER STANCE and flip up yer back sight when a bad guy comes along??
Nope, just "spray and pray"
"All that the South has ever desired was that the Union, as established by our forefathers, should be preserved, and that the government, as originally organized, should be administered in purity and truth." – Robert E. Lee
Back when weight didn't mean anything to me I was old school about such matters. I tweaked some pieces around on a lathe then screwed them together into this. But I like lighter items these days.
My name isn’t comrade Jim Conrad I believe in the 2nd amendment.
fuggin govt worker with a new pickup.....
I can't help it if you made poor life choices.. You could of joined the Army like everyone else 18yrs ago and got you some time in the mixer known as Iraq..
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
My name isn’t comrade Jim Conrad I believe in the 2nd amendment.
fuggin govt worker with a new pickup.....
I can't help it if you made poor life choices.. You could of joined the Army like everyone else 18yrs ago and got you some time in the mixer known as Iraq..
I was gonna......I made the tape...but was too heavy.
Believe it or not, I gave 3 FALs away a while ago,...along with many other firearms.
Well, hope you planted a good seed.
I think so.
Good deal.
Lot of good men wielded a FAL. The history alone of such a weapon is enough to cause a person to admire the physical form. Maybe even take a couple steps back.
My name isn’t comrade Jim Conrad I believe in the 2nd amendment.
fuggin govt worker with a new pickup.....
I can't help it if you made poor life choices.. You could of joined the Army like everyone else 18yrs ago and got you some time in the mixer known as Iraq..
I was gonna......I made the tape...but was too heavy.
You mean too damn sexy?
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
Bought a few of these Sig M400 AR’s several years ago for this type of social event.
Always thought they’d just stay dormant...NOT!
Show what’s protecting your wallet....😎
Do you always carry a loaded firearm with the safety OFF?
Give a man a fish and he eats for a day. Give a man a welfare check, a forty ounce malt liquor, a crack pipe, an Obama phone, free health insurance. and some Air Jordan's and he votes Democrat for a lifetime.
God bless Texas----------------------- Old 300 I will remain what i am until the day I die- A HUNTER......Sitting Bull Its not how you pick the booger.. but where you put it !! Roger V Hunter
One of my riding "companions", 458 SOCOM. For when a 5.56/223 just isn't enough! In for some cleaning, and caressing, this morning after a range session a while back.
Last edited by DeanAnderson; 04/02/20.
It isn't what happens to you that defines you, it's what you DO about what happens to you that defines you!
Mines a floorboard heater. Lives with the snap top tool box under the back seat with four ASC 20 rounders full of 77 TMKs in the door pocket. Gets called into service about once a week or so for roadside pork emergency duty or the occasional coyote. Keep this fella between the seat and console for more immediate use, cup holder always has a couple speed strips in it.
Back when weight didn't mean anything to me I was old school about such matters. I tweaked some pieces around on a lathe then screwed them together into this. But I like lighter items these days.
The po-po gonna start pulling people over in clarksville for aimless driving around.
Starbucks is not an essential destination.
People gotta think on their feet. " going to rural king officer to get some califlower seeds for the farm" "Going to the co op officer to get some dewormer for my cattle" " Going to the proctologist officer to get the pylops scoped in my bowels"
Not schitt like. " Im going to see granny at restwell nursing home" " going to a clandestine bible study group, 37 of us are gonna be their"
I would share but mine met with a tragic boating accident some time back.
Canoe?
😬😎
Beaver10; Top of the morning to you sir, I hope that other than it being chilly and our world has turned upside down that this finds you and yours as well as can be.
Funny you should mention canoe incidents as they're quite common up here across the medicine line as of late.
As you may or may not know, the old Hudson's Bay Fur Brigade trail went down through our Okanagan Valley on the spring run down to Fort Vancouver on the Columbia.
Although I was in a canoe made of modern materials, in a recent reenactment I myself capsized the canoe and lost all our personal firearms. Of course the firearms were there only to add an air of authenticity to the reenactment and for no other purpose.
As well, I should add that the bundle of furs lost in the same incident were not real fur as that would be cruel....
Anyways, this Canuck is more than a wee bit green with envy for my friends south of the medicine line who are able to freely purchase and shoot AR variants. It's one of the many restrictions put upon us subjects of Mr. Dressup's Imperial Fleet - er I mean Federal Government...
All the best to you my cyber friend and stay well.
Gunners current truck accessories for making dum-dums disappear is a Repr stoked with 176gr Lehigh tungsten drill bits, which provide a level of penetration John Holmes would approve of...Grins 😬
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
9MM , Old style computer case , uses 30rd stick mags
Oh ! I likeeee!
the consolidation of the states into one vast republic, sure to be aggressive abroad and despotic at home, will be the certain precursor of that ruin which has overwhelmed all those that have preceded. Robert E Lee ~Molɔ̀ːn Labé Skýla~
All I’ve gots in the truck is a Contender carbine in 22 Hornet and a 357 S&W for “social distance” distances.
Am I outta date or what!
“My horn is full and my pouch is stocked with ball and patch. There is a new, sharp flint in my lock and my rifle and I are ready. It is sighted true and my eyes can still aim.” Kaywoodie
Gunners current truck accessories for making dum-dums disappear is a Repr stoked with 176gr Lehigh tungsten drill bits, which provide a level of penetration John Holmes would approve of...Grins 😬
Was up late last night reading your thread, had to go to the post office this morning and intercept some kind of damn fed-ex-smart post handoff deal and didn't want to wait for my package til 5pm tonight, getting out of the truck I laughed and thought about this thread.
Threw the package on the hood, pulled some "wallet protector/crackhead reforming tools" from my belt and pockets and took a pic for my old Buddy Beav!
Gunners current truck accessories for making dum-dums disappear is a Repr stoked with 176gr Lehigh tungsten drill bits, which provide a level of penetration John Holmes would approve of...Grins 😬
Was up late last night reading your thread, had to go to the post office this morning and intercept some kind of damn fed-ex-smart post handoff deal and didn't want to wait for my package til 5pm tonight, getting out of the truck I laughed and thought about this thread.
Threw the package on the hood, pulled some "wallet protector/crackhead reforming tools" from my belt and pockets and took a pic for my old Buddy Beav!
All that’s missing from your picture is a ultra possessive Healer who loves his truck. Very bad idea touching a man’s truck when a dog is riding shotgun...hint. 😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
As of now folks in Nevada can keep a loaded hand gun in their vehicle. I suspect our commie Gov and the bleeder demonrat Legislature will try to put and end to this. Gotta love a pistol.
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
Some of you gents know how to put together a fine operating battle gun yourself, or you know what to buy off the shelf, maybe making some part changes to improve your AR’s performance and reliability.
I have no such experience on how to build one out, or what aftermarket parts to add.
Here’s my question...I bought 3 Sig M400’s years ago. Two carbines and one shorty....
I went with the Sig M400 because at the time they had pretty good reviews on functionality and above average accuracy. They are pretty accurate and haven’t caused me any repeative malfunctions...Which is good.
With that said...If I wanted to buy a turn-key AR shorty in 5.56 is there a couple manufactures and models you would suggest that make an all around, solid, weapon?
If my Sigs are good to go, I’m happy to keep them....But, if they’ye Junk, my feelings won’t be hurt if there’s a lot better turn-key options available today.
😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
As of now folks in Nevada can keep a loaded hand gun in their vehicle. I suspect our commie Gov and the bleeder demonrat Legislature will try to put and end to this. Gotta love a pistol.
LIKE BUTTON 😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
Gunners current truck accessories for making dum-dums disappear is a Repr stoked with 176gr Lehigh tungsten drill bits, which provide a level of penetration John Holmes would approve of...Grins 😬
Was up late last night reading your thread, had to go to the post office this morning and intercept some kind of damn fed-ex-smart post handoff deal and didn't want to wait for my package til 5pm tonight, getting out of the truck I laughed and thought about this thread.
Threw the package on the hood, pulled some "wallet protector/crackhead reforming tools" from my belt and pockets and took a pic for my old Buddy Beav!
All that’s missing from your picture is a ultra possessive Healer who loves his truck. Very bad idea touching a man’s truck when a dog is riding shotgun...hint. 😎
Laugh! I guess I could pitch one or two of 130lb male RockWelders up in the truck, I have four of those alligator headed things here, and no fear Beav, I sleep on a flowerdy bed too. I have one room in the house, the rest are hers to do with as she wants ; ]
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
I see these come up for sale from time to time...one day I'll have a moment of weakness and bite .
Believe it or not, I gave 3 FALs away a while ago,...along with many other firearms.
I believe you.
I gave all my guns to Goodwill. Heard some old Boomer bought 'em all.
No,...I'm serious. Firearms are something that I've played with. For a while it was FALs, then something else,..then something else.
My safe was full of firearms that I had played with until I was done with them. So I passed a lot of them along.
I didn't disarm myself, however. A particularly reliable Kel-Tec SU-16 resides beside the bed and there's a lightweight AR stuck in a closet somewhere around here.
For recreational shooting, I've come full circle. I've been having a lot of fun playing with a bargain priced semi auto .22 rifle and I've got a hankering for a Henry .22 magnum pump rifle. The next time I find one when I'm knocking around the gun shops it'll probably come home with me.
To show you how boring I am,..a very nice old 4" Ruger Police Service Six stays close most of the time. I've got some more hi-tech handguns. But double action revolvers have been one of my things for a long time. They fit my hand and they hit where they seem like they should.
Some of you gents know how to put together a fine operating battle gun yourself, or you know what to buy off the shelf, maybe making some part changes to improve your AR’s performance and reliability.
I have no such experience on how to build one out, or what aftermarket parts to add.
Here’s my question...I bought 3 Sig M400’s years ago. Two carbines and one shorty....
I went with the Sig M400 because at the time they had pretty good reviews on functionality and above average accuracy. They are pretty accurate and haven’t caused me any repeative malfunctions...Which is good.
With that said...If I wanted to buy a turn-key AR shorty in 5.56 is there a couple manufactures and models you would suggest that make an all around, solid, weapon?
If my Sigs are good to go, I’m happy to keep them....But, if they’ye Junk, my feelings won’t be hurt if there’s a lot better turn-key options available today.
😎
They aint junk. Drop a 3pd velocity single stage curved shoe in em. Or go full blown and do a elftmann. Put on a VG6 gamma 5.56 comp brake Gun will run like a horizontal sewing machine needle then. Will have ta rezero.
This will be aquired soon. Go put 30 or 40 on it again today or tommorow. Blue jean back pocket carry. Good enough ta stick in a Mooks face...
We can start a campfire gofundme page for you.. So you can pick it up sooner..
Lol!!! Thats not the one I'm getting. Mine is in much better condition That pic is off the web. I'm good.... Gonna get the aftermarket grip made by FAB defense for em with the thumb mag release and slight grip extension under the slide. Of course keep the red bakelite grip. Get an extra mag maybe 2. It will be GTG. Something to go along with my commie type 3.
You ever run across the Iraqi Tariq/ berreta clones???? Some decent qual Some, I swear ta god were made with a large hand file set.
Here is my build from scratch 300 BO 7.5 inch barrel, Anderson upper , psa lower, sb3 brace kit, float tube unknown manufacturer (guy selling them at a gunshow)
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
My opinion on ARs these days is, "parts is parts".
You can buy one with the particular features you want,..but the bones of one is going to be as good as the bones of another.
I bought a Bushmaster QRC a while ago just because it had the very light barrel and no sight on the front gas block. (scope is a given for me these days) It tips the scales at a tad under 6 lbs and is bare bones and bargain priced.
It's exactly what I wanted in an AR,..basic and very light.
Gunners current truck accessories for making dum-dums disappear is a Repr stoked with 176gr Lehigh tungsten drill bits, which provide a level of penetration John Holmes would approve of...Grins 😬
Was up late last night reading your thread, had to go to the post office this morning and intercept some kind of damn fed-ex-smart post handoff deal and didn't want to wait for my package til 5pm tonight, getting out of the truck I laughed and thought about this thread.
Threw the package on the hood, pulled some "wallet protector/crackhead reforming tools" from my belt and pockets and took a pic for my old Buddy Beav!
All that’s missing from your picture is a ultra possessive Healer who loves his truck. Very bad idea touching a man’s truck when a dog is riding shotgun...hint. 😎
Unless it's a Lab.
Originally Posted by 16penny
If you put Taco Bell sauce in your ramen noodles it tastes just like poverty
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
4 VZ-58's, amongst "acquaintances". .
Slaves get what they need. Free men get what they want.
Some of you gents know how to put together a fine operating battle gun yourself, or you know what to buy off the shelf, maybe making some part changes to improve your AR’s performance and reliability.
I have no such experience on how to build one out, or what aftermarket parts to add.
Here’s my question...I bought 3 Sig M400’s years ago. Two carbines and one shorty....
I went with the Sig M400 because at the time they had pretty good reviews on functionality and above average accuracy. They are pretty accurate and haven’t caused me any repeative malfunctions...Which is good.
With that said...If I wanted to buy a turn-key AR shorty in 5.56 is there a couple manufactures and models you would suggest that make an all around, solid, weapon?
If my Sigs are good to go, I’m happy to keep them....But, if they’ye Junk, my feelings won’t be hurt if there’s a lot better turn-key options available today.
😎
They aint junk. Drop a 3pd velocity single stage curved shoe in em. Or go full blown and do a elftmann. Put on a VG6 gamma 5.56 comp brake Gun will run like a horizontal sewing machine needle then. Will have ta rezero.
Thanks Ren....😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
Here is my build from scratch 300 BO 7.5 inch barrel, Anderson upper , psa lower, sb3 brace kit, float tube unknown manufacturer (guy selling them at a gunshow)
Uber badness....👍🏻😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
4 VZ-58's, amongst "acquaintances". .
Alantic firearms is always outta the damn czech small arms ones. Like ta get one someday. Just the basic poly stock black one.
Here is my build from scratch 300 BO 7.5 inch barrel, Anderson upper , psa lower, sb3 brace kit, float tube unknown manufacturer (guy selling them at a gunshow)
Uber badness....👍🏻😎
I need to go get a suppressor ie tax stamp. only reason I went 7.5 per deflave instructions
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
Gots a pipe wrench, very long screw driver & a hatchet.
Lame, but loaded, just the same !
we're suggested to use the 6' distance guideline..........
one of these is a better choice.......
As you guys are aware, we don't have that option !
So, as bandit closes, to exactly 6'11", throw that heavy pipe wrench for effect n keep the stabber & hacker in case the fugger doesn't go down, or GTF outta my space !!
Paul.
"Kids who grow up hunting, fishing & trapping, do not mug little old Ladies"
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
4 VZ-58's, amongst "acquaintances". .
Alantic firearms is always outta the damn czech small arms ones. Like ta get one someday. Just the basic poly stock black one.
They are scarcer than hen's teeth down here.
Slaves get what they need. Free men get what they want.
I need to educate myself on suppressors...It’s time to put a couple in jail.
Definitely want one for the 22 LR’s. The other can would be on a AR pistol in 5.56.
I’ve dragged my boots long enough...Time to do it.
😎
Brother Beav, a .22 with a can is life changing. I was even more surprised by how well a can worked on the AR pistol, but it still has a bit of a bark to it. The .22? My wife has really good hearing (alas) and she didn't even realize I was shooting in the basement when I first got the can for the 22/45. The fugging magpies still don't know what's hitting them...
Eliminate qualified immunity and you'll eliminate cops who act like they are above the law.
Be funny as fugg whipping this out if I would have kept it. Lol!!!
Holy shît is that a CRT!!!
You're going all out vintage.
You gotta excuse my lack of knowledge
CRT???
Curio , relic t something????
Probably.
Some other dudes now, that I traded with for my type 3
This is what it looked like when I got it. The stock all bubbafied. So I didnt have any qualms fixing and refinishing it.
Nazi birch and red laminate glue. Holy fugg ....... What a mofo to get a finish to adhere on it properly. Lot of trial and error work. 0 reference google fu wise.
Be funny as fugg whipping this out if I would have kept it. Lol!!!
Holy shît is that a CRT!!!
You're going all out vintage.
You gotta excuse my lack of knowledge
CRT???
Curio , relic t something????
Probably.
Some other dudes now, that I traded with for my type 3
This is what it looked like when I got it. The stock all bubbafied. So I didnt have any qualms fixing and refinishing it.
Nazi birch and red laminate glue. Holy fugg ....... What a mofo to get a finish to adhere on it properly. Lot of trial and error work. 0 reference google fu wise.
Put up several threads on the rifle last year.
Wtf no disabled vet plates???
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
Here is my build from scratch 300 BO 7.5 inch barrel, Anderson upper , psa lower, sb3 brace kit, float tube unknown manufacturer (guy selling them at a gunshow)
damn I bet that's a noisemaker
have you paid your dues, can you moan the blues, can you bend them guitar strings
Be funny as fugg whipping this out if I would have kept it. Lol!!!
Holy shît is that a CRT!!!
You're going all out vintage.
You gotta excuse my lack of knowledge
CRT???
Curio , relic t something????
Probably.
Some other dudes now, that I traded with for my type 3
This is what it looked like when I got it. The stock all bubbafied. So I didnt have any qualms fixing and refinishing it.
Nazi birch and red laminate glue. Holy fugg ....... What a mofo to get a finish to adhere on it properly. Lot of trial and error work. 0 reference google fu wise.
Put up several threads on the rifle last year.
Wtf no disabled vet plates???
No bogus bronze star meritorious one either.
70% bro...... Ortho/arthritis/ blown out right knee from a adventure at Delonagha on a rock face 1 day ( belayman fugged me hard) if I woulda got my tab I woulda made CSM eventually insted of SFC. Hearing/ bell rung many times Ab issues from delayed grenade blast injuries Mosul may 03/ torn repaired LS diaphragm and recurring hernias x 3 from that day.
Unca suga pays his broken toys. Cant complain.. I'm above ground using O2 still. others aint...
Gotta be 100% in TN. Even if I could get one, I wouldnt... Dudes missing limbs and schitt deserve that.
But unfortunately around here it is the 100% 1 or 2 enlistment Play the PTSD game types rolling with the plates.....
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
4 VZ-58's, amongst "acquaintances". .
Alantic firearms is always outta the damn czech small arms ones. Like ta get one someday. Just the basic poly stock black one.
They are scarcer than hen's teeth down here.
You ever see the red phenolic resin wood impregnated ones they have advertised on alantic firearms.
Handsome looking as heck.
I wish I woulda bought a buncha combloc wpns when the wall went down in 89 90 and the market got flooded till billy boy,s AWB in 94.
Big time investment on what it all brings now for prices.
Here is my build from scratch 300 BO 7.5 inch barrel, Anderson upper , psa lower, sb3 brace kit, float tube unknown manufacturer (guy selling them at a gunshow)
damn I bet that's a noisemaker
I built it to run a suppressor one of these days I will get around to doing the paperwork. I never shot it with out ear pro, I imagine ears ring for a month.
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
Gunners current truck accessories for making dum-dums disappear is a Repr stoked with 176gr Lehigh tungsten drill bits, which provide a level of penetration John Holmes would approve of...Grins 😬
Was up late last night reading your thread, had to go to the post office this morning and intercept some kind of damn fed-ex-smart post handoff deal and didn't want to wait for my package til 5pm tonight, getting out of the truck I laughed and thought about this thread.
Threw the package on the hood, pulled some "wallet protector/crackhead reforming tools" from my belt and pockets and took a pic for my old Buddy Beav!
All that’s missing from your picture is a ultra possessive Healer who loves his truck. Very bad idea touching a man’s truck when a dog is riding shotgun...hint. 😎
I need to educate myself on suppressors...It’s time to put a couple in jail.
Definitely want one for the 22 LR’s. The other can would be on a AR pistol in 5.56.
I’ve dragged my boots long enough...Time to do it.
😎
Brother Beav, a .22 with a can is life changing. I was even more surprised by how well a can worked on the AR pistol, but it still has a bit of a bark to it. The .22? My wife has really good hearing (alas) and she didn't even realize I was shooting in the basement when I first got the can for the 22/45. The fugging magpies still don't know what's hitting them...
That’s excellent news Brother Remsen! My bride has grown tired of hearing me, and our dog Boot performing our victory dance after I whack a coon in our yard.
A silent kill would allow me and the dog the freedom to celebrate without persecution by our unappreciative critic, who obviously hates the performing arts.
😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
Top is an Arsenal AK folder Middle is a Colt SBR with mono upper and flash hider matches to suppressor Bottom is a spikes lower with Colt upper and 14" barrel
Various AR pistols that I've put together.
In training to be an obedient master to my two labs
Top is an Arsenal AK folder Middle is a Colt SBR with mono upper and flash hider matches to suppressor Bottom is a spikes lower with Colt upper and 14" barrel
Various AR pistols that I've put together.
Lennie wins.........
Got enough for a squad minus 2 Give him a 2 man 240 crew or 2 dudes with saws or RPK,s.
Top is an Arsenal AK folder Middle is a Colt SBR with mono upper and flash hider matches to suppressor Bottom is a spikes lower with Colt upper and 14" barrel
Various AR pistols that I've put together.
Lennie wins.........
Got enough for a squad minus 2 Give him a 2 man 240 crew or 2 dudes with saws or RPK,s.
That one is a 5.56 18" 1-8T Wilson Recon Tactical Barrel, Geissele SSA-E Trigger, PRI Handguard, and maxim defense stock with JP silent capture. Topped of with a Sig Romeo 5
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
G5 has a lot of ways to make an enemy suffer...
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
Never owned an AR. Never had much desire to. I do have 10-15 M16/AR15 30 round Magazines that I completely forgot to turn back into supply when I left the service though...
That said, this shotgun pretty much goes anywhere my pickup does, riding.....uh.....shotgun, and a Ruger LCP .38 Special +P is always in the console.
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
4 VZ-58's, amongst "acquaintances". .
Alantic firearms is always outta the damn czech small arms ones. Like ta get one someday. Just the basic poly stock black one.
They are scarcer than hen's teeth down here.
You ever see the red phenolic resin wood impregnated ones they have advertised on alantic firearms.
Handsome looking as heck.
I wish I woulda bought a buncha combloc wpns when the wall went down in 89 90 and the market got flooded till billy boy,s AWB in 94.
Big time investment on what it all brings now for prices.
Whenever I do see them around, the wood is all hacked up and the finish is about wore off of the metal.
Wish I could kick that rapist Billy Bob in the junk as hard as I could.
Slaves get what they need. Free men get what they want.
Never owned an AR. Never had much desire to. I do have 10-15 M16/AR15 30 round Magazines that I completely forgot to turn back into supply when I left the service though...
That said, this shotgun pretty much goes anywhere my pickup does, riding.....uh.....shotgu, and a Ruger LCP .38 Special +P is always in the console.
T Inman; Good evening to you sir, I hope that all things considered that this finds you doing well.
Now in a sea of AR's with the occasional FNFAL and AK thrown in, none of which we Canucks can carry about freely, I finally see a post with something that'd be considered acceptable on this side of the medicine line.
Perhaps I can bestow honorary Canuck status on you for your post, eh?
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
G5 has a lot of ways to make an enemy suffer...
I approve of your message. When I grow up I just might get me one of those .45-120 things.
I am..........disturbed.
Concerning the difference between man and the jackass: some observers hold that there isn't any. But this wrongs the jackass. -Twain
Be funny as fugg whipping this out if I would have kept it. Lol!!!
i was going to ask if it was a Ljungmann, but knowing you, I'm betting on a Hakim
AC Code May 44 production WW2 Walther 8mm G43 Hitlers " Garand" All 7#,s match No import marks. Stock had been severely molested by previous owner. That is my work to get it semi original appearing and presentable Woulda been about a 2200 rifle if the stock wasnt fugged with. Original front sight hood missing and cleaning rod Bout 1500 1600 value in the pic. Original mag alone worth 275 300 ish.
Ya I stole it for 275....... Aint my job to educate a seller.
The 2 you mention were based off this and the soviet svt 40. As were chezch vz 58,s and several other mil platforms. Vz 58 is the apex of the design JMO. The G43 was based off the SVT intially. SVT is a supreior weapon and the grandfather of the design. G43,s had metalurgy issues in the rear cradle area of the receiver.
275 bucks " didnt work" per previous owner. 2 days of me 100% disassembly and cleaning and assembly got it up and running. Took it out to slumlords. Ran 10 thru it fast as i could squeeze the trigger. Next clip started failure to extract and eject. Had a tiny screw adjustment for extractor tension and retention. Feild stripped it , tiny spring pops outta extractor. Fugg......... We searched for it then had ta roll back to his house get a metal detector to find it. Gawd..... I coulda bought a new spring kit for the entire rifle for around 95 bucks. Between that and the metalurgy issues. Made the decision. Was gonna keep it Take it on a token deer hunt once in awhile. Then thinking about parts to be found if somethng went south.
Traded it for my Arsenal SLR 100H type 3. No regrets..... Rather have a working tool than a collector " my precious type of thing".
4 VZ-58's, amongst "acquaintances". .
Alantic firearms is always outta the damn czech small arms ones. Like ta get one someday. Just the basic poly stock black one.
They are scarcer than hen's teeth down here.
You ever see the red phenolic resin wood impregnated ones they have advertised on alantic firearms.
Handsome looking as heck.
I wish I woulda bought a buncha combloc wpns when the wall went down in 89 90 and the market got flooded till billy boy,s AWB in 94.
Big time investment on what it all brings now for prices.
Whenever I do see them around, the wood is all hacked up and the finish is about wore off of the metal.
Wish I could kick that rapist Billy Bob in the junk as hard as I could.
The ones on alantic firearms The czech small arms ones are new manufacter with german lothar CL barrels.
Century arms makes em outta kits with non cl us barrels Run around 600 to 750
Sticker shock..... 1090 for plain 1300 ish for phenolic red stocks.
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
Dang right Beav and Fubar, EdM and me are going to report to DigitalDan's Company with our single shot rifles!
Brother Gunner, it's good to hear from you... your absents has been noticed.... glad to hear you are goin shooting with buddies
LOL! no, that was a joke Fubar as EdM and me were the only one that posted pics of single shot rifles, and Dan talked against the spray and pray deal, figure we would load our wares and go work for him as our Company Commander. The GD holyrollers about ran me out of this forum, they're already going to send me to hell as is, this is a cool thread completely void of GD religion!
Varmint rifle, 2 or 4 legged Shoots fine, but is 1 in 9 and all I run is 55gr ball or V max
Less is sometimes more.
kwg
For liberals and anarchists, power and control is opium, selling envy is the fastest and easiest way to get it. TRR. American conservative. Never trust a white liberal. Malcom X Current NRA member.
Keep in mind spray’n prayin’ ain’t a winning strategy. One needs to outwit the little cretins.
Gunner500 has put together some nostalgic tools of death just for you DD.
45-100 Bull Barrel Sharps (near and far payload of doom)
40 round culling belt - with 530gr paper patch. 45 Colt saa, and an 11.5” Bagwel Damascus Bowie for up close and strategic penetration into soft tissue.
Dang right Beav and Fubar, EdM and me are going to report to DigitalDan's Company with our single shot rifles!
Brother Gunner, it's good to hear from you... your absents has been noticed.... glad to hear you are goin shooting with buddies
LOL! no, that was a joke Fubar as EdM and me were the only one that posted pics of single shot rifles, and Dan talked against the spray and pray deal, figure we would load our wares and go work for him as our Company Commander. The GD holyrollers about ran me out of this forum, they're already going to send me to hell as is, this is a cool thread completely void of GD religion!
Nice talking to You too old Buddy.
We have lost many good men Gunner, hang in there..... I have gone on a tear and am under attack also..... you know what they say ,when you take fire, you are over the target....
Originally Posted by Judman PS, if you think Trump is “good” you’re way stupider than I thought! Haha
18in Green mtn barrel chambered in 223 Wylde, psa lower with psa lower build kit, with A2 stock, 1-4 swfa. Rifle I use for service rifle. Pretty damn good out to 600yds with 77gr Sierra tmk loaded to mag length.
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
My other one with a 10x swfa, 18 inch 223 Wylde psa upper and lower, lbt trigger, it now has an A2 stock on it as well. I use this for midrange prone shoots out to 600yds. Shoots 77gr Sierra OTM and 75gr hornady OTM pretty good can hold MOA is I do my part.
Last edited by 79S; 04/02/20.
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
I need to educate myself on suppressors...It’s time to put a couple in jail.
Definitely want one for the 22 LR’s. The other can would be on a AR pistol in 5.56.
I’ve dragged my boots long enough...Time to do it.
😎
Brother Beav, a .22 with a can is life changing. I was even more surprised by how well a can worked on the AR pistol, but it still has a bit of a bark to it. The .22? My wife has really good hearing (alas) and she didn't even realize I was shooting in the basement when I first got the can for the 22/45. The fugging magpies still don't know what's hitting them...
Gigglin' fun, Beave.
Slaves get what they need. Free men get what they want.
This ain’t no AR, but will spit out 8 rounds of 30-06 right fast. All correct H&R
Yowza!
I like that ping noise when en block clip flies out.
I'll bet you do.
Had a shot at a pristine one right here in the Fire Classifieds a few years ago that was priced a couple bucks over what market was then. You can't touch one in that condtion for that price now.
Enjoy that one, hanco!
Last edited by local_dirt; 04/03/20.
Slaves get what they need. Free men get what they want.
This ain’t no AR, but will spit out 8 rounds of 30-06 right fast. All correct H&R
Yowza!
I like that ping noise when en block clip flies out.
I'll bet you do.
Had a shot at a pristine one right here in the Fire Classifieds a few years ago that was priced a couple bucks over what market was then. You can't touch one in that condtion for that price now.
Enjoy that one, hanco!
Paid 600.00 for it about 8 years ago. Got it from a guy here at work. When I found out what it was really worth. I gave him another 200.00. It was the guy’s father’s. It was still a good deal at 800.00.
Yes they are. I shoot 80.5 Berger’s out of them, loaded long so single shot. I want to get some 85 nosler rdf they claim (nosler) you can shoot them from mag length. Berger claimed the same thing with the 80.5 full bore but I didn’t have much luck. But those 77 Sierra’s tmk’s at mag length shoot great.
Originally Posted by Bricktop
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego.
This ain’t no AR, but will spit out 8 rounds of 30-06 right fast. All correct H&R
Yowza!
I like that ping noise when en block clip flies out.
I'll bet you do.
Had a shot at a pristine one right here in the Fire Classifieds a few years ago that was priced a couple bucks over what market was then. You can't touch one in that condtion for that price now.
Enjoy that one, hanco!
Paid 600.00 for it about 8 years ago. Got it from a guy here at work. When I found out what it was really worth. I gave him another 200.00. It was the guy’s father’s. It was still a good deal at 800.00.
Yessir. You are still waaaaay good at $800.
Slaves get what they need. Free men get what they want.
Varmint rifle, 2 or 4 legged Shoots fine, but is 1 in 9 and all I run is 55gr ball or V max
Less is sometimes more.
kwg
Just a DPMS bbl (chrome lined) on a Stag upper w Anderson lower. JP spring kit and set screw to get trigger decent. Reg cheap furniture (like smaller OD handguard) and a Magpul grip. Kinda heavy, but comfy. Shot recovery is good.
Does around .75" for 5 at 100 benched (when I slapped a 2-7X on it).
Had a Bushmaster during the ban, same 11.5/5.5 bbl but w fixed carry handle. Had a junk 4X on top, stock trigger and it did 1". Slapped together a non chrome lined 1 in 9 full 16" on Stag upper/lower and it did .75" (2-7X and trigger job).
I find 1 in 9 usable and accurate, good enough for chucks or yotes out to 200. Which is what a non bipod rig would be used for.
Buds have heavy bbl $$$ ARs and go PD blasting. They are not walking rifles.
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/5t73h1zm/788-E4-FF6-F69-A-40-E5-8828-5-A16-B7779128.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/tjw8Dz1.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/H5MZJS4.jpg)
![[Linked Image]]( https://www.24hourcampfire.com/ubbthreads/gallery/80/full/126275.jpeg)
![[Linked Image]](https://www.24hourcampfire.com/ubbthreads/gallery/80/full/126278.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/gIqyXqE.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/Y0xrw1s8/izzy.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/8zSqi9M.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/jdwqmwSB/5-B33-A692-E18-A-43-D0-BDBB-88590-CD84664.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/L5czLJTw/IMG-0069-2.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/sbcGyPT.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/mCC0N4A.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/NXaiA1J.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/u4hBEpS.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/nrRsD7cr/B12188-D4-9-D82-4-BD7-B1-BD-31-E129048-CE6.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/6pJBbmY9/7-FEAAAF0-E87-E-466-A-B79-C-A91-ECED8899-C.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/J6aHXQH.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/QtRc1R6t/20200402-082756.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/g2dLLrLX/longrange.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/jqm2VcH4/49-C22-BA2-87-EE-4-A4-B-9-E77-2533-B9-E12893.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/pr5FbXs2/image1.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/Gm4SZDyW/20190506-114334.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/FFdKTWWm/20190506-114311.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/iYI4RGD.jpg)
![[Linked Image from i26.photobucket.com]](https://i26.photobucket.com/albums/c124/huntsman22/critters/014.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/YlC728u.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/QMdwP1S9/C441-A12-B-F0-CB-497-E-8-A86-390731-C1012-B.jpg)
Was up late last night reading your thread, had to go to the post office this morning and intercept some kind of damn fed-ex-smart post handoff deal and didn't want to wait for my package til 5pm tonight, getting out of the truck I laughed and thought about this thread.
![[Linked Image from i.imgur.com]](https://i.imgur.com/XiCPIKO.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/6pgQcrdc/CF126038-8-CF8-4-BE6-A836-6-FCD92406-C12.jpg)
![[Linked Image from oi723.photobucket.com]](https://oi723.photobucket.com/albums/ww235/JohnnyLimbo/WrzHBDWsQ5qNkqnLSp8tqg_zpsmlnh0jk8.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/qMjL6f8C/27-FD3-F35-D9-CF-4-FC0-AE24-D01508-F7-AF1-C.gif)
I have one room in the house, the rest are hers to do with as she wants ; ]![[Linked Image from i.imgur.com]](https://i.imgur.com/Gx0lOJ8.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/k9UEg6Y.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/zj0M6tV.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/2YLkUrc.jpg)
![[Linked Image]]( https://www.24hourcampfire.com/ubbthreads/gallery/80/full/126306.jpeg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/QtOGx4c.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/L63NL4PZ/667-F1-C0-A-1-FC7-42-C1-86-E8-1-B3296204-AB4-1-105-c.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/sxqMjgzg/20190430-174233.jpg)
![[Linked Image from s-media-cache-ak0.pinimg.com]](https://s-media-cache-ak0.pinimg.com/736x/c7/0c/34/c70c3437cfa8e37f93a84f689fa56d84.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/1tXXKyXx/513-ECFDD-C0-BD-466-F-A7-AB-E6-E1818-EDABC.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/JnRgvRFf/AR-3.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/dQHXNPjf/ar-4.jpg)
![[Linked Image from live.staticflickr.com]](https://live.staticflickr.com/65535/49728282208_8cf554dded_c.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/8kq3DwhM/C11-B930-B-5-FB5-493-E-A31-E-463-B25-BDFFAB.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/NGyVWZrQ/B5-CE1033-7-A45-4215-AAB5-AC5-F33-B30196.jpg)
![[Linked Image from i.postimg.cc]](https://i.postimg.cc/zDQckNpn/4-F50-DBA3-6827-4353-924-F-1-B2-EB35-AC8-E7.jpg)
...![[Linked Image from i.imgur.com]](https://i.imgur.com/SaE37c8.jpg)
![[Linked Image]](https://www.24hourcampfire.com/ubbthreads/gallery/80/full/126343.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/4S0Iwkw.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/8GE73Av.jpg)
![[Linked Image]]( https://www.24hourcampfire.com/ubbthreads/gallery/80/full/126352.jpeg)
![[Linked Image]]( https://www.24hourcampfire.com/ubbthreads/gallery/80/full/126353.jpeg)