Are there any other options that will work with the factory rail other than Ruger, Warne & Leopold. The Ruger and others a very solid but not much for looks. I like the rifles I have seen milled for Talley's but Talley doesn't do this anymore. Conetrol or S&K are nice but I don't want to replace the rail.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
Hard to find and expensive, but if you can locate a set of early Ruger vertically split rings, they are very nice.
Probably the nicest looking, least obtrusive aftermarket rings for a No. 1 quarterrib are/were? made by S&K. They were one piece made of thin flexible steel that wrapped around the scope tube. A call or email to them will tell if they're still available.
Thanks, I will contact S&K and Conetrol as they only show the models for the varmint barrel with no rib. Probably would not be that expensive to modify the rib if it is deep enough. If not the Talley route will work.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
I have a custom on a #1 action and had the quarter rib milled for Tally QD rings. It worked out nicely and will repeat the procedure on the current build.
I have a custom on a #1 action and had the quarter rib milled for Tally QD rings. It worked out nicely and will repeat the procedure on the current build.
That's a beauty. Do you know if there is enough metal on the factory rib for Talleys?
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
when I was in business, I have fitted custom ribs to number ones and then milled it for talley rings. the factory rib is very hard, almost like a spring and I do think there is enough metal at the rear to be able to mill it for talley rings.
Ok here are some more pictures. share image online free Last year the smith did a 38-55 on a High Wall action for me this year it's another #1 in 300 H&H. I'm hopeless
Nice rings. I don't really need QD and was looking for vertical split rings like the originals. I am going to mount the Ruger rings and then see if I feel like going for either the Evolution gun works picatinney rail or a custom later. But please keep the ideas coming.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
I'm glad you liked them. The smith is working on another #1 in 300 H&H and recently completed a Winchester High Wall for me in 38-55 which I think is a nicer rifle than this one.