Home Forums Hunting & Shooting Gunsmithing Recoil pad grinding jig

Anyone have one they want to get rid of? I only have 1 pad to replace and don’t really want to buy a new one. Yep I’m cheap otherwise I would just pay someone to do it for me. I would pay a reasonable price for one.

I do them free hand... Should be UTUBE video on this I would think. Just go slow and think.

I’ve go tone that I’d let you have, never got the hang of that part. _like sheet rock, it’s an art and a science!
However I’m. Traveling for a couple of weeks so you’d have to wait till Next month fo it.

I had one for a time... Only used it a few times before abandoning it and going free-hand.. Sold it to another guy many years ago..

Like Ray said, just go slow, pay attention and you'll be OK.. I use a 50 grit disc on the belt sander, wrap a layer of masking tape on the stock next to the pad and grind till just touching the tape... Remove it and do the rest by hand..

Thanks y’all

Check with Brownells and see if they have a video on it.
Go slow and watch the angle of the stock in reference to the pad while grinding. The angles change a lot but you can do it. down around the toe has alot of angle adjustment.. I would do 2 wraps of tape and when you hit the first layer take one layer off and finish by hand. Ask more questions as needed.

Limabean,

You doing just one pad?