24hourcampfire.com
24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
#15226063 09/15/20
Joined: Jan 2008
Posts: 15,698
M
mjbgalt Online Content OP
Campfire Ranger
OP Online Content
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
Just read the manual for my 54 caliber lyman rifle I bought this week.

Says the powder channel in the barrel is 38 caliber and I can see that it's narrower than the bore with a flashlight.

Never realized that about the older style rifles. Any tips on how to get that clean and dry after firing?

BP-B2

Joined: Jul 2004
Posts: 3,114
Campfire Tracker
Online Content
Campfire Tracker
Joined: Jul 2004
Posts: 3,114
I use super hot soapy water and it gets it squeaky clean. The metal dries quickly due to the heat then jut oil it up and you are good


If you find yourself in a hole....quit digging
Joined: Jun 2019
Posts: 9,682
H
Campfire Outfitter
Online Content
Campfire Outfitter
H
Joined: Jun 2019
Posts: 9,682
Flint or percussion? On percussion rifles, I use a drilled-out nipple and a length of rubber hose, and pump hot soapy water in and out of the barrel with a tight-fitting patch, followed by a boiling water rinse and a swab with a patch moistened with Ballistol. It's good to go until the next hunt or target shoot. My flinters have a clamp-on purge hose that fits the flash hole and they get the same procedure.


Ignorance can be fixed. Stupid is forever!
Joined: Jan 2008
Posts: 15,698
M
mjbgalt Online Content OP
Campfire Ranger
OP Online Content
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
Percussion. Not new to this but it occurred to me I might have been doing this the wrong or the hard way all this time

Joined: Jan 2001
Posts: 9,089
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Jan 2001
Posts: 9,089


"The only thing necessary for the triumph of evil is for good men to do nothing."
Edmund Burke 1795

"Give me liberty or give me death"
Patrick Henry 1775
IC B2

Joined: Apr 2010
Posts: 14,635
S
Campfire Outfitter
Offline
Campfire Outfitter
S
Joined: Apr 2010
Posts: 14,635
If you can find your way home......it's not rocket science!


Even birds know not to land downwind!
Joined: Sep 2009
Posts: 46,211
G
Campfire 'Bwana
Offline
Campfire 'Bwana
G
Joined: Sep 2009
Posts: 46,211
Dribble a few grains of RL-7 or 15 under the nipple, reinstall, cap and fire, it will safely blow/burn that crap out of there [port too] down to the clean bare steel. smile


Trump Won!
Joined: Jan 2008
Posts: 15,698
M
mjbgalt Online Content OP
Campfire Ranger
OP Online Content
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
I just always seemed to find some brown on my patch the next time I get a muzzleloader out. I hate to think I left some moisture or powder in there. I want it to last many years.

Last edited by mjbgalt; 09/16/20.
Joined: May 2007
Posts: 3,251
B
Campfire Tracker
Offline
Campfire Tracker
B
Joined: May 2007
Posts: 3,251
Denatured alcohol. #1 product I run down my bore & breech before following up with my regular oil.

Joined: Jan 2008
Posts: 15,698
M
mjbgalt Online Content OP
Campfire Ranger
OP Online Content
Campfire Ranger
M
Joined: Jan 2008
Posts: 15,698
Went out to a family member's place and sighted it in and had a blast. Pun intended lol

Cleaned with hot soapy water and oiled it all up. Am I getting the channel between the nipple and the powder charge clean and dry enough? Any tips on that?

Thought maybe canned air?

IC B3

Joined: Feb 2013
Posts: 6,435
Campfire Tracker
Offline
Campfire Tracker
Joined: Feb 2013
Posts: 6,435
Most soaps have salt as an ingredient. So that is bad. Simple green does not have salt, so it is a wise choice.
Balistrol cleaner was invented for cleaning blackpowder when militarizes still used blaclpowder. It can be used as a cleaner mixed with water, and a preservative oil straight out of the bottle. It has a basic PH by design, so it neutralized the acid in the black powder.
So salt and sulfur are big corroding agents, so try solutions to minimize their activity in your barrel.

Joined: Jul 2015
Posts: 12
R
New Member
Offline
New Member
R
Joined: Jul 2015
Posts: 12
i use a mixture of Murphys Oil soap, Ballistol & isopropyl alcohol. equal 1/3 parts and it works great bores always look great. i also use it as a patch lube when shooting matches and never have to swab the barrel can shoot all day. i always lube the barrel inside and out with straight ballistol after cleaning.

Joined: Dec 2005
Posts: 9,562
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Dec 2005
Posts: 9,562
Acetone . I haven’t lubed a muzzleloader barrel in 20 yrs

Last edited by srwshooter; 09/29/20.
Joined: Feb 2006
Posts: 18,033
Campfire Ranger
Offline
Campfire Ranger
Joined: Feb 2006
Posts: 18,033
Originally Posted by mjbgalt
I just always seemed to find some brown on my patch the next time I get a muzzleloader out. I hate to think I left some moisture or powder in there. I want it to last many years.

It's all about using the hottest soapy water you can tolerate working with. The key is to get the barrel as hot as you can handle. Run a couple dry patches through the barrel to suck out excessive moisture, then a lightly oiled patch, and then one storke with a dry patch. Set the now hot the the touch barrel aside and let the heat do it's work on any remaining moisture.


molɔ̀ːn labé skýla

Moderated by  RickBin 

Link Copied to Clipboard
YB23

Who's Online Now
636 members (007FJ, 257Bob, 01Foreman400, 222ND, 160user, 1234, 69 invisible), 2,825 guests, and 1,421 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,187,655
Posts18,399,259
Members73,817
Most Online11,491
Jul 7th, 2023


 







Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.108s Queries: 14 (0.003s) Memory: 0.8502 MB (Peak: 0.9561 MB) Data Comp: Zlib Server Time: 2024-03-28 19:04:15 UTC
Valid HTML 5 and Valid CSS