|
|
Joined: Apr 2004
Posts: 407
Campfire Member
|
OP
Campfire Member
Joined: Apr 2004
Posts: 407 |
Wanting to learn how to use 7x57 Norma necked down to 6mm rem brass any video or some of you pros teach me . thanks
|
|
|
|
|
Joined: May 2011
Posts: 15,861
Campfire Ranger
|
|
Campfire Ranger
Joined: May 2011
Posts: 15,861 |
May I ask, is the 7x57 Norma different than the 7x57 Mauser?
There are 2 rules to success:
1. Never tell everything that you know.
|
|
|
|
|
Joined: Dec 2008
Posts: 78,300
Campfire Oracle
|
Campfire Oracle
Joined: Dec 2008
Posts: 78,300 |
Enquiring minds want to know..... 
"...the left considers you vermin, and they'll kill you given the chance..." Bristoe
|
|
|
|
|
Joined: Jul 2004
Posts: 6,656
Campfire Tracker
|
|
Campfire Tracker
Joined: Jul 2004
Posts: 6,656 |
I think they are both similar to the .284 Ingwe Super.
Merry Christmas, Gentlemen.
'Four legs good, two legs baaaad."
----------------------------------------------
"Jimmy, some of it's magic,
Some of it's tragic,
But I had a good life all the way."
(Jimmy Buffett)
SotG
|
|
|
|
|
Joined: Apr 2004
Posts: 407
Campfire Member
|
|
OP
Campfire Member
Joined: Apr 2004
Posts: 407 |
Norma is make of brass sorry yes mauser
|
|
|
|
|
Joined: Feb 2001
Posts: 7,947
Campfire Outfitter
|
|
Campfire Outfitter
Joined: Feb 2001
Posts: 7,947 |
kk alaska
Alaska 7 months of winter then 5 months of tourists
|
|
|
|
|
Joined: May 2011
Posts: 15,861
Campfire Ranger
|
|
Campfire Ranger
Joined: May 2011
Posts: 15,861 |
Norma is make of brass sorry yes mauser Then you can look at the 6mm Remington for answers.
There are 2 rules to success:
1. Never tell everything that you know.
|
|
|
|
|
Joined: Apr 2004
Posts: 42,697
Campfire 'Bwana
|
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,697 |
Since it is a wild and crazy Christmas...
I'm going to take a blind jump off the roof here.....
Since I have necked down 7mm Mauser down to 6mm Remington, by just running it down in a 6mm Rem die
and have run 6mm Remington up thru a 7mm Mauser die...
I think you'd be just fine...
If you have or access to a 257 Roberts, neck the 7mm brass down without the spindle in the Roberts die..
Then neck size that down using a 6 mm Rem die, with the spindle in....
there ya have 7 mm Mauser brass necked down to 6mm Remington...
if ya don't have a 257 Roberts die, neck the 7mm brass down in a 6mm Rem, with the spindle out...
then neck it up again, with the spindle in....
of course I'm just taking a wild ass guess here... but that usually works....
at least here in Oregon...but then, that's in Oregon...
may not work where you live...
Merry Christmas and Happy New Year...& Cheers/ Best Regards...
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
|
Joined: Apr 2004
Posts: 407
Campfire Member
|
|
OP
Campfire Member
Joined: Apr 2004
Posts: 407 |
I have a 243 fl die and a 6mm fl die can and will this work for me
|
|
|
|
|
Joined: Apr 2004
Posts: 42,697
Campfire 'Bwana
|
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,697 |
If you have a 7mm Mauser die, Full length size it with the spindle out of the die..
Then you can use the 243 die, to neck down the upper half... that will work...
or do the same with the 7mm Mauser die first
and then full length down size with the 6mm Rem die....
I prefer to work the brass as little as possible...
before neck sizing gown to 6 mm, it wouldn't hurt to anneal the neck, for 6 to 8 seconds...
new down while the brass is warm, will make it easier as the brass will be soft....
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
|
Joined: Apr 2004
Posts: 407
Campfire Member
|
|
OP
Campfire Member
Joined: Apr 2004
Posts: 407 |
What other good quality brass can you use say like lapua to neck down thanks looking for good options
|
|
|
|
|
620 members (160user, 12344mag, 1234, 10ring1, 10gaugemag, 10gaugeman, 60 invisible),
2,299
guests, and
1,202
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,190,618
Posts18,454,995
Members73,908
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
