Home Forums Hunting & Shooting Custom Rifles & Wildcats Found the right (sort of) CZ Mini....now what?

The 300 Hamm’r should just be a rechamber job.

Keep in mind, this is for stuff under 250, mostly under 150 yards, doesn’t need high BC, long bullets, doesn’t need to be loaded to any longer max COAL than factory, hold 30 rounds or use AR mags, and is about compactness an handling, speed, deer/hogs/coyotes/truck gun use in thick cover, ease of getting into and out of vehicles, stands, briars, mostly shot offhand, likely never prone, and maybe using a can just to be hearing safe, on occasion. If available, it’ll probably run factory loads as much as handloads, just for convenience. It may get exposed to all sorts of weather, beat to [bleep], get shoved in the hands of a newby/smalley to shoot something......in short, all those practical things that don’t concern long range, max ballistics, pushing envelopes, or any of the other nitpicky, rifle looney concerns that my other ARs and bolt guns are far more suited for. It’s not supposed to be like anything else in my safe. This is not being done to suit the desires or purposes or opinions of 99% of other shooters, just mine. I don’t care that someone else hates where I’m going with it or what I’m driving. It’s gonna be another farm/brush/tractor/rhino gun.....not something with colored tape, or for being photogenic with trout rods, shooting mats, and little people, or bragging about.

If it shoots like crap, nay, before you shoot it, get a torque driver and check the action screws torque. Mine were loose from the factory.

Then there’s rebore going to 350 or 357 AR.....just to really piss off the BC worshippers.....either way, there’s 2.32” of mag box to work with vs 2.26” for anything with an AR mag. ....so I’m thinking there’s few barriers to going any of my possible directions, aside from time, $, and components.