Home Forums Hunting & Shooting Hunting Rifles Pictures of your Remington model 7's

All dandy’s right there

I need to find the factory sights for a blued walnut one I have in 6mm rem. Its got the 18.5 barrel with the deep bluing and the checkered stock. I bought it from a kid for $250 in a gun store parking lot in Boise in about 2000. He was headed out the door passed and cussing the store because they only offered him $125. I said ill give you twice that and more if you have the sights. He didn't have the sights.

My brother used it a year or 2 later to drop a decent buck at about 400 yards. He was really impressed with what that little gun and a 100gr partition could do.

Bb

I may have a set of sights taken off one. It will likely be this weekend before I can check but shoot me a pm late Friday or early Sat and I'll try to look for them.

Just took delivery of my third Beanland build on a 7 action. Light fast twist 22-250, short/light 6.5 saum and 24” “heavy” 6.5 saum.

I’ll try to get a picture or two up

22" 7-08 ackley improved with a #1 lilja in a mcm edge Mr stock . Need to start that project

Taking mine elk hunting this next week. I’ve got a spike tag; I think a .358 is a good match for a spike elk in the timber. Maybe I’ll get to find out. It’s loaded with my new favorite blacktail load- 200 grain Accubonds at 2650 fps.

I’m bringing my 7WSM Kimber for non-timber stuff.

That .358 will put the hammer on one for sure. Good Luck!!

I really like the Remington model 7 SS HS.

Nice .......... I like those 1st gen Model Sevens the best.

I've only got one Model Seven these days, and it's A 7mm SAUM. Started out as an LS model and I bedded it to a CDL handle.




Zeroed at 200.

Those are both awesome. What calibers?

I don’t have any pictures (and wouldn’t know how to post them if I did), but I’ve got 3 Beanland Rifles built on Seven actions. Love them

Remington Mod 7MS . . . .350 Rem Mag and 7mm-08 Rem

I bought a couple of these from the Remington Custom Shop. Both are sweet rifles.

I'd like to have one of those in 35Remington.

those are so nice looking and the 350 rem mag makes it sooo! cool!

Those model seven ms are so nice!!

I was at the range the other day and a senior had his Model 7 out. He was proud as a peacock. The gun looked great and he was still getting it done at +80 years old.

Model 7 stainless, Bartlein 1:8" twist 18 inch fluted barrel in .223, fluted bolt and slightly oversize bolt knob, lightweight firing pin, CDI bottom metal for AICS mags using Accurate Mag 5 rounders modified for greater OAL. Manners EH8, Talley rings, DPT overbarrel mini centrefire suppressor. Leupold Mk4 3.5-10x40 FFP M5. Bare rifle about 5.5lb, scoped suppressed and magazine 7.3LB. Shooting 80gr ELDM at 2810fps. Killed 28 big game animals in the last 9 months so far.

Just installed a Triggertech in this one today.