|
|
Joined: Nov 2015
Posts: 14,101
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Nov 2015
Posts: 14,101 |
223 using 25 gr of varget picked up a box of hornady 55gr soft points with cannuler had no trouble loading 60 gr vmax or 55 gr game king brass is full length resized and trimmed
|
|
|
|
Joined: Aug 2006
Posts: 22,900
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2006
Posts: 22,900 |
|
|
|
|
Joined: Dec 2012
Posts: 1,981
Campfire Regular
|
Campfire Regular
Joined: Dec 2012
Posts: 1,981 |
Make sure you haven't got the die screwed done to far.
|
|
|
|
Joined: Nov 2015
Posts: 14,101
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Nov 2015
Posts: 14,101 |
Already had a bunch of brass primed and loaded 70 gr flat base Speer just fine it must be the bullets there hornady #2266 this is the same brass that was bulging
Last edited by earlybrd; 02/20/21.
|
|
|
|
Joined: Jan 2013
Posts: 2,511
Campfire Regular
|
Campfire Regular
Joined: Jan 2013
Posts: 2,511 |
Bulging how/where? The neck?
Last edited by grovey; 02/22/21.
|
|
|
|
Joined: Nov 2015
Posts: 14,101
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Nov 2015
Posts: 14,101 |
|
|
|
|
Joined: Nov 2011
Posts: 30,894
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2011
Posts: 30,894 |
I've bulged cases before.
Takes a lot of ball powder and a long bullet, but it can be done.
You didn't use logic or reason to get into this opinion, I cannot use logic or reason to get you out of it.
You cannot over estimate the unimportance of nearly everything. John Maxwell
|
|
|
|
Joined: Aug 2009
Posts: 1,989
Campfire Regular
|
Campfire Regular
Joined: Aug 2009
Posts: 1,989 |
I've seen this when the seating die was turned down too far and was over-crimping the case.
lightman
|
|
|
|
Joined: Jun 2007
Posts: 632
Campfire Regular
|
Campfire Regular
Joined: Jun 2007
Posts: 632 |
I've seen this when the seating die was turned down too far and was over-crimping the case. Start here... I've done it
ttpoz
in silvam ne ligna feras (don't carry logs into the forest)
|
|
|
|
Joined: Sep 2008
Posts: 5,717
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2008
Posts: 5,717 |
I've seen this when the seating die was turned down too far and was over-crimping the case. Start here... I've done it run an empty case into the seating die, If it touches or crimps you've found your problem
"Camping places fix themselves in your mind as if you had spent long periods of your life in them. You will remember a curve of your wagon track in the grass of the plain like the features of a friend." Isak Dinesen
|
|
|
|
Joined: Dec 2012
Posts: 1,981
Campfire Regular
|
Campfire Regular
Joined: Dec 2012
Posts: 1,981 |
If the seating die isn't touching the shoulder measure the dia of your necks before you seat a bullet and then after if there's more than about .004 you might have to use some dry lube. Some dies really size the necks down and if your brass is work hardened you could be getting alot of spring back after the expander button pulls through
|
|
|
|
604 members (007FJ, 160user, 12344mag, 1eyedmule, 10gaugemag, 10Glocks, 55 invisible),
2,708
guests, and
1,252
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,568
Posts18,453,832
Members73,908
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|