Home Forums Gear Horses and ATV's Going up one tire size

My Polaris 450 has 24x8-12's on the front and 24x10-12's on the back..Thinking on getting new tires and not only are 25's easier to find, they tend to be cheaper..

My question is does anybody foresee any problems going with the 25's??

should have no issues....

although on my SxS machine.I run all the same size

28-10x14's

Two good buying sources

https://www.pureoffroad.com/atv-tires.htm

https://www.rockymountainatvmc.com/tires-and-wheels/atv-tires

I recently bumped my Polaris 500 up one tire size, didn't seem to make an ounce of difference.

No problem. Tires will vary that much from one brand and model to another.

On my Razor, I went from 25's to 26's. It added 2" in diameter so I got 1 inch more clearance. I also added a 2" lift giving me 3" more. In rocks, which is our primary hazard here, it's made a huge difference. It's an 800cc and power has been no problem at all.

Thanks all... I should be OK... I was looking at the Kendra Bear Claws BTR radials..They start at 25 inches,not even offering a 24,at least none that I could find...They do have 24" in their bias tires though.. The radials are 8 ply which interests me..I do a lot of rocky desert riding/

You’ll be very happy with the HTR’s ..