Has anyone ever had problems with a Bonanza did not sizing correctly. I have an old Bonanza .17 Remington FL die set that won’t size the neck down or bump the shoulder back. I have tried two different presses and had someone who has 40 plus years experience in reloading look at it and neither one of us can figure it out. Thanks in advance.
have had same issue with other dies...
turned out the problem was using a different shell holder than normally
another time, the die evidently got bumped and was not sizing it down all the way,
or the brass gets so brittle, annealing it would return enough elasticity to be able to bump it down enough...
or finally that could happen if your brass finally needs a trim....