|
|
Joined: Dec 2017
Posts: 4,551
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2017
Posts: 4,551 |
Any experience with these? https://www.tnwfirearms.com/product-p/asrx-kitt-xxxx-xxxx-hmbd.htm They say on their website they are backordered by 6 months. I'm thinking since the creep wants to get rid of them I want one or something like it.
|
|
|
|
Joined: Nov 2009
Posts: 15,871
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2009
Posts: 15,871 |
I've got a friend that ordered one of those, or one like it. Supposedly, it was 75%-80% complete. He found out pretty quick that whatever parts needed to be finished, took a lot more work than he was led to believe. IIRC, he had to drill some holes or maybe drill out some holes and something else. It took some pretty meticulous workmanship to finish the rifle, but he eventually got it done. When finished, it worked.
Old Turd- Deplorable- Unrepentant Murderer- Domestic Violent Extremist
Just "Campfire Riffraff and Trash"
This will be my last post! Flave 1/3/21
|
|
|
|
Joined: Dec 2017
Posts: 4,551
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2017
Posts: 4,551 |
Thanks. I think I can take care of the machining so that's not a problem.
|
|
|
|
Joined: May 2017
Posts: 246
Campfire Member
|
Campfire Member
Joined: May 2017
Posts: 246 |
There are jigs available to guide you on the drilling. There is a fair amount of work to be done to complete the lower, but it can all be done on a drill press. CNC would be better for these, but not necessary. Without the jig, I wouldn't even try to complete one. Here is a site that carries the jigs. Jigs
"What's the point of being retired if you can't climb trees and wash your feet in the creek?" - Teal
|
|
|
|
Joined: Dec 2017
Posts: 4,551
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2017
Posts: 4,551 |
There are jigs available to guide you on the drilling. There is a fair amount of work to be done to complete the lower, but it can all be done on a drill press. CNC would be better for these, but not necessary. Without the jig, I wouldn't even try to complete one. Here is a site that carries the jigs. JigsI used one f those plastic jigs to drill some holes for a guy and was surprised at how well it was made.
|
|
|
|
Joined: Dec 2019
Posts: 16,836
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2019
Posts: 16,836 |
It was the 95s That required on or two holes..
-OMotS
"If memory serves fails me..." Quote: ( unnamed) "been prtty deep in the cooler todaay " Television and radio are most effective when people question little and think even less.
|
|
|
|
Joined: Feb 2006
Posts: 6,863
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2006
Posts: 6,863 |
I have a 80% lower that has been sitting in my closet for about 4 years or so. Paid $49 for it, hate to see what they are going for now ( just the lower, not the kit)
|
|
|
|
602 members (1lessdog, 10gaugemag, 1Longbow, 10Glocks, 10gaugeman, 222ND, 77 invisible),
2,152
guests, and
1,351
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,422
Posts18,450,988
Members73,901
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|