Home Forums Gear Free Classifieds Remington 700 stocks HS, b&c stocks

I have two stocks here that I got on rigs and have since swapped out. I honestly don’t know if I am identifying the makers 100% and maybe someone can correct me if I’m wrong. To the best of my knowledge they are as follows

First “I’ll take it” I can do paypal Venmo etc. or check/MO

700 BDL short action RH opened up for a bartlein 3b should be a #4 for most other makes and the barrel channel could be filled in if you want. Clean aluminum bedding block. I believe this is an early HS precision made stock. It’s got a smooth finish sage green, nice cheek weld, overall very clean but does have some minor scuffs & handling marks. I can certainly text pics Of those if you’d like. It is very light! Very stiff feel too. It feels lighter and stiffer than the current production b&c or Hs that I have experience with. It feels much like a Kimber Montana stock (going by feel)and with a bedding block of course...I am guessing it’s a smaller aluminum block than either of these makers use today (at least the stocks that I have felt)
Nice stock for a project! $175





Next is a 700 rh long action ADL. I believe this is a b&c stock. This one is a bit of a project. Opened up for a Jarrett “sporter” contour I’d say a Remington mag barrel would be close but probably tapers quicker. This stock has skim coat bedding on the lug portion and the rear action screw but it’s light.

The bad- it’s an ADL configuration and you’ll note the cracking right in Front of the trigger guard. It’s right where the back of the mag box would sit. Now this isn’t necessarily a bad thing as the stock could be easily opened up for BDL bottom metal. Any Smith could do it, I’m sure it would be pretty cheap to do; but would require a mill & someone more professional than myself. If you open this up for BDL bottom metal you would never even notice the “crack“. Stock also has very minor handling marks any of which I’d be happy to take specific pics of that you’d like.
$75

I will take the ADL stock

ADL IS SOLD

Green short action weighs 2lb on the nose

up

^^^

The “damaged stock” mentioned in original post is sold
Both if these are ready to shoot great shape & great project stocks
I gotta get rid of some stuff

Still available—Green hs precision stock still available $125 + shipping

Also adding this adl stock

B&C ti - $125 + shipping
Remington 700 short adl
No Al bedding block. Light \ weight
Devcon bedding in the action.
The barrel channel was opened up and bedded with bedding tape in the barrel to specific float gap.
Also I had a threaded insert positioned so an atlas rail or srp rail will mount right up. Front/rear sling stud missing you can also fill the rear hole with a small cap screw
Fits a rock cr Remington magnum contour

I can text pics too

PM sent on green SA stock.

B&C ti - $125 + shipping
Remington 700 short adl
No Al bedding block. Light \ weight
Devcon bedding in the action.
The barrel channel was opened up and bedded with bedding tape in the barrel to specific float gap.
Also I had a threaded insert positioned so an atlas rail or srp rail will mount right up. Front/rear sling stud missing you can also fill the rear hole with a small cap screw
Fits a rock cr Remington magnum contour

I'll take this.

PM to follow.

Thanks
Dave

BOTH
SPF