Home Forums Hunting & Shooting Handguns Magguts +2 for the p365xl

Month or two Magguts released their +2 kit for the extended xl mags for the p365.


I got one, by my fault ordered the standard and had to swap it with them for the extended floor plate.

The standard will not fit the xl frame.


All is well now.

Finally got around to shooting it some today.

Put a box through. No problems.

Adds very little to the length of the grip.



Now the p365x / xl has 14+1 capacity.

Nice. Thanks for the report.

Ps.

Don’t bother with the RangeTray mag loaders. 3d printed, the 2 i bought both broke.

The MakerShot brand is better quality.

Is the follower not captured by the spring? I watched a YouTube video and the guy just dropped the follower in the magazine sleeve and then inserted the spring and popped the floorplate on.

Yes.

2 separate pieces.

What am I missing here? I just use the 15 round mags from Sig.

Length.

The magguts kit isn’t much longer ( haven’t measured it. ) than the 12rd.

Gotcha. I'm ok with the 15's with my paws.

Got these, based on the OP.

Good stuff, seems pricey for what ya get.

It all comes down ta extra rounds for pocket carry.

If it's not gonna be pocket-carried, I'd go with the 15 round mag for another $5.

Tactical.dev is now making a base plate that fits the maguts kit, if you wanna spend even more. 😁