|
Joined: Dec 2004
Posts: 3,639
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2004
Posts: 3,639 |
I'm considering a Ruger 77/22 in .22 Hornet. What's the opinion of these rifles.......accuracy and reliability!
Last edited by vapodog; 07/29/21.
|
|
|
|
Joined: Aug 2006
Posts: 22,902
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2006
Posts: 22,902 |
I'd rather one in 17 Hornet.....
|
|
|
|
Joined: Nov 2007
Posts: 8,448
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2007
Posts: 8,448 |
I'm considering a Ruger 77/22 in .22 Hornet. What's the opinion of these rifles.......accuracy and reliability! I wouldn't. It's a gun I'd love to love but I've owned two, been burned twice, and I don't think a third try is in the cards. The chambers were at least SAAMI maximum and the factory ammo was SAAMI minimum or possibly less. I was getting a great deal of case thinning at the web and sometimes case head separations firing factory ammo. Even if they didn't separate in the chamber sometimes they'd separate in the FL die. None of my handloads with new brass would let me fire the case a 2nd time either. I don't believe Ruger would have stood behind it and made it better. I suppose I could have, probably should have, gotten a gunsmith with a SAAMI minimum reamer that would have fit the ammo that was available and had him set the barrel back a couple turns and recut a clean chamber. Didn't. Instead I got out of .22 hornet and moved to the .221 Fireball in a 700 LVSF.
Anyone who thinks there's two sides to everything hasn't met a M�bius strip.
Here be dragons ...
|
|
|
|
Joined: Dec 2004
Posts: 3,639
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2004
Posts: 3,639 |
I'm considering a Ruger 77/22 in .22 Hornet. What's the opinion of these rifles.......accuracy and reliability! I wouldn't. It's a gun I'd love to love but I've owned two, been burned twice, and I don't think a third try is in the cards. The chambers were at least SAAMI maximum and the factory ammo was SAAMI minimum or possibly less. I was getting a great deal of case thinning at the web and sometimes case head separations firing factory ammo. Even if they didn't separate in the chamber sometimes they'd separate in the FL die. None of my handloads with new brass would let me fire the case a 2nd time either. I don't believe Ruger would have stood behind it and made it better. I suppose I could have, probably should have, gotten a gunsmith with a SAAMI minimum reamer that would have fit the ammo that was available and had him set the barrel back a couple turns and recut a clean chamber. Didn't. Instead I got out of .22 hornet and moved to the .221 Fireball in a 700 LVSF. This is exactly the kind of feedback I was looking for.....I wonder if anyone at Ruger reads these things? !Thanks for the feedback.....
|
|
|
|
Joined: Oct 2004
Posts: 6,620
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2004
Posts: 6,620 |
I guess it depends on when it was built. I heard that had Ruger outsourced their barrels in the past, and this caused issues with accuracy. I have two 77's with no problems. Accurate, reliable, well made.
|
|
|
|
Joined: Dec 2005
Posts: 7,508
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2005
Posts: 7,508 |
Never heard of any major issues. They are well sought after, and command good prices. If they had a lot of major issues I doubt that would be the case.
|
|
|
|
Joined: Dec 2006
Posts: 5,907
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2006
Posts: 5,907 |
My 77/22 Hornet has been a fine little rifle. It shoots nice with several different types of ammo and has never had any issues with function. Mine really like the 35gr Vmax load from Hornady.
When I die I hope I don't start voting democrat.
|
|
|
|
Joined: Feb 2006
Posts: 963
Campfire Regular
|
Campfire Regular
Joined: Feb 2006
Posts: 963 |
I have had one in 22 hornet for years and have never had a problem with it. The laminated version. It is easy to load for and case life has been good. What is not to like.
|
|
|
|
Joined: Oct 2004
Posts: 26,426
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,426 |
I'm considering a Ruger 77/22 in .22 Hornet. What's the opinion of these rifles.......accuracy and reliability! I wouldn't. It's a gun I'd love to love but I've owned two, been burned twice, and I don't think a third try is in the cards. The chambers were at least SAAMI maximum and the factory ammo was SAAMI minimum or possibly less. I was getting a great deal of case thinning at the web and sometimes case head separations firing factory ammo. Even if they didn't separate in the chamber sometimes they'd separate in the FL die. None of my handloads with new brass would let me fire the case a 2nd time either. I don't believe Ruger would have stood behind it and made it better. I suppose I could have, probably should have, gotten a gunsmith with a SAAMI minimum reamer that would have fit the ammo that was available and had him set the barrel back a couple turns and recut a clean chamber. Didn't. Instead I got out of .22 hornet and moved to the .221 Fireball in a 700 LVSF. This is exactly the kind of feedback I was looking for.....I wonder if anyone at Ruger reads these things? !Thanks for the feedback..... Ruger knows they suck at QC, and they have made a decision that it's best to let the customers figure out what's wrong and send the product back to them. They are normally pretty good at doing it right the second go round.
|
|
|
|
Joined: Jan 2019
Posts: 688
Campfire Regular
|
Campfire Regular
Joined: Jan 2019
Posts: 688 |
My m77/22lr is my favorite gun to shoot. While not a hornet I can say that the rifle is a quality piece imo.
|
|
|
|
Joined: Dec 2010
Posts: 19,229
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2010
Posts: 19,229 |
I'm considering a Ruger 77/22 in .22 Hornet. What's the opinion of these rifles.......accuracy and reliability! I wouldn't. It's a gun I'd love to love but I've owned two, been burned twice, and I don't think a third try is in the cards. The chambers were at least SAAMI maximum and the factory ammo was SAAMI minimum or possibly less. I was getting a great deal of case thinning at the web and sometimes case head separations firing factory ammo. Even if they didn't separate in the chamber sometimes they'd separate in the FL die. None of my handloads with new brass would let me fire the case a 2nd time either. I don't believe Ruger would have stood behind it and made it better. I suppose I could have, probably should have, gotten a gunsmith with a SAAMI minimum reamer that would have fit the ammo that was available and had him set the barrel back a couple turns and recut a clean chamber. Didn't. Instead I got out of .22 hornet and moved to the .221 Fireball in a 700 LVSF. This is exactly the kind of feedback I was looking for.....I wonder if anyone at Ruger reads these things? !Thanks for the feedback..... Ruger knows they suck at QC, and they have made a decision that it's best to let the customers figure out what's wrong and send the product back to them. They are normally pretty good at doing it right the second go round. Been that way for as far back as I can remember. Lot's of problems with Rugers but in the end they will make it right.
|
|
|
|
Joined: Aug 2003
Posts: 38,855
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2003
Posts: 38,855 |
I've always wanted one. Heard that the trick is to have them punched to K-Hornet and cut and crowned shorter and they're a real peach.
Me
|
|
|
|
Joined: Dec 2015
Posts: 8,264
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2015
Posts: 8,264 |
i may not be a gun writer but i own a few 22 Hornets and i am also a gun dealer too, i have a Ruger 77 / 22 Hornet laminated stock S.S. this rifle is my go to rifle for varmints out in the country where i live and its also accurate too. these Ruger 77/22 great little rifle in a 22 Hornet , i keep this rifle loaded year around hang`n in the garage , i can`t say enough how fine of a rifle this 77 / 22 Hornet is , its the one rifle i would be lost without this handy little rifle . my 77/22 - 22 Hornet Ruger rifle has not had any problems for me , matter fact i might buy a extra one just in case i wanna keep one at my hunting camp too ?
Last edited by pete53; 07/30/21.
LIFE NRA , we vote Red up here, Norseman
|
|
|
|
Joined: Jul 2001
Posts: 60,052
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,052 |
I've only been around one 77 Hornet, a laminated-stock model belonging to a friend in .17 Hornady Hornet. He bought it maybe 3-4 years ago after getting into prairie dog shooting, partly because he tried my CZ 527 .17 Hornet and really liked the cartridge--partly because ammo was cheap and he didn't want to reload.
It proved to be really accurate, and he gave me all his fired Hornday brass--which were so close in size to the cases fired in my CZ that I could neck-size them, just like I do the Hornady cases fired in my rifle.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Dec 2004
Posts: 5,111
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2004
Posts: 5,111 |
I have a set of the trigger and bolt thin spacers that I bought for a 77/22mag. in an attempt to tune it up a little.
Spacers are mostly unused or near new condition. If someone would like them I have no further use of them Works on 77/17 thru 77/44mag.
PM me Tim
Last edited by michiganroadkill; 07/30/21.
"The significant problems we face cannot be solved at the same level of thinking we were at when we created them." Albert Einstein
At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
|
|
|
|
Joined: Dec 2014
Posts: 9,059
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2014
Posts: 9,059 |
Before about 2010 or so the receivers and barrels were not threaded...with predictable accuracy results. Caveat Emptor.
Well this is a fine pickle we're in, should'a listened to Joe McCarthy and George Orwell I guess.
|
|
|
|
Joined: Jan 2001
Posts: 29,790
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 29,790 |
I'd only go centerfire with a the threaded model and even then it may need some bolt shimming and stoning on the trigger.
Only own a 22LR and it needed a little tweaking to bring it around.
1Minute
|
|
|
|
Joined: Nov 2014
Posts: 1,388
Campfire Regular
|
Campfire Regular
Joined: Nov 2014
Posts: 1,388 |
I have an early one with laminated stock and the gun metal grey finish. Punched you k-hornet and shimmed bolt to .001 over saami minimum. It is a fine shooter after the shimming.
|
|
|
|
Joined: Dec 2011
Posts: 582
Campfire Regular
|
Campfire Regular
Joined: Dec 2011
Posts: 582 |
I bought mine in about '92-93.
When I first got it, with factory ammo, it shot a solid 2" @100, so nothing to write home about.
Then I added a Timney spring/sear kit, which helped accuracy.
What really pulled the accuracy together was LilGun powder and small pistol primers, with neck sizing provided by a Lee Collett Die.
Now, it is easily an MOA, or a bit better, rifle, and that is with my coyote load using a 45gr Barnes XLC.
My buddy bought the same model, the 20" barrel sporter, and it shoots like mine with the same load. We also added the Timney kit to it.
|
|
|
|
Joined: Dec 2005
Posts: 7,508
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2005
Posts: 7,508 |
I bought mine in about '92-93.
When I first got it, with factory ammo, it shot a solid 2" @100, so nothing to write home about.
Then I added a Timney spring/sear kit, which helped accuracy.
What really pulled the accuracy together was LilGun powder and small pistol primers, with neck sizing provided by a Lee Collett Die.
Now, it is easily an MOA, or a bit better, rifle, and that is with my coyote load using a 45gr Barnes XLC.
My buddy bought the same model, the 20" barrel sporter, and it shoots like mine with the same load. We also added the Timney kit to it. Every gun can be finicky about ammo. Sounds like you did all the right things and now have a decent shooter.
|
|
|
|
608 members (260Remguy, 1beaver_shooter, 10gaugeman, 240NMC, 007FJ, 257_X_50, 63 invisible),
2,343
guests, and
1,245
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,190,650
Posts18,455,461
Members73,908
|
Most Online11,491 Jul 7th, 2023
|
|
|
|